Edelbrock Signature Series Valve Covers


SIGNATURE SERIES CHROME VALVE COVERS
Engineered for function and styled for good looks, triple chrome-plated Signature Series valve covers have stock-style breather baffles that prevent oil passage to the PCV valve. These quality valve covers accept all emissions equipment, including PCV valve. Rubber grommets for the breather and PCV valve holes included. Matching breathers sold separately. NOTE: Tall Profile are 1-1/4" taller than stock, and clear most roller rockers and valvetrain components. Low Profile valve covers clear air-conditioning and alternator brackets. Tall profile valve covers will not clear stud girdles. Signature Series valve covers clear most aluminum rocker arms and moderate lift cams. Check clearance prior to purchase.
High Performance Signature Series Valve Covers by Edelbrock
Application Overall Height Emissions Chrome Black
AMC 290-304-343-360-390-401 V8 '67-91 (no baffle) 3.0" - 4431 -
Buick 3.8L & 4.1L V6 '77 & later (no baffle) (A) 3.1" - 4486 -
Chevrolet 2.8L 60 V6 '82-93 (no baffle) 2.6" - 4488 -
Chevrolet 194-292 1962-88 (USA) & 1962-2001 (South America) inline 6 3.5" - 4477 -
Chevrolet 262-400 '59-86 (low) (B) 2.8" - 4449 4443
Chevrolet 262-400 '59-86 (tall) (B) 3.7" 4649 4643
Chevrolet 262-400 '87-95 Centerbolt (low) 2.2" - 4446 -
Chevrolet 396-454 V8 '65 & later (low) 2.6" - 4480 4483
Chevrolet 396-454 V8 '65 & later (tall) 3.8" - 4680 4683
Chrysler 318-340-360 V8 '65-91 3.2" - 4495 4473
Chrysler 361-383-400-413-426-440 V8 '58-79 3.6" - 4491 4493
Ford 260-289-302 (not Boss) and 351-W V8 (D) 3.7" - 4460 4603
Ford FE 352-360-390-406-410-427-428 V8 '58-76 3.9" - 4462 4623
Ford 351M-400 and 351-C V8 2.9" - 4461 -
Ford 429/460 V8 3.6" - 4463 -
Oldsmobile 350-455 V8 (fits 5- and 10-hole heads) 2.9" - 4485 -
Pontiac 301-326-350-389-400-421-455 V8 - '62-79 (no baffle) (C) 3.0" - 4456 4453
Pontiac 301-326-350-389-400-421-455 V8 - '62-79 (tall) (C) 3.4" - 4457 -
Edelbrock Installation Note INSTALLATION NOTE:

(A) Will not fit turbo engine.
(B) Will not fit '86 & later Vette aluminum heads or 1987 and later Chevy cast iron heads.
(C) Will not clear alternator on 1968 Firebird 400.
(D) Will not clear 5.0 EFI Intakes (Except Victor #2945 and #3887) unless spacers are used.


HOLD-DOWN TABS
Universal valve cover hold-down kits may be used on all Edelbrock and similar design chrome valve covers. #4401 also works with our Elite Series low profile S/B Chevy valve covers and #4402 works with Elite Series tall profile S/B Chevy covers. All hold-down kits have 4 items per pack, except #4414.
Hold Down Tabs by Edelbrock
Application Emissions Part #
2-Piece Wing Bolts (3-3/4" long) - 4400
2-Piece Wing Bolts (4-1/4" long, 4 per pack) - 4401
1-Piece Race Wing Bolts, Universal (5" long, 4 per pack) - 4402
Hold-Down Tab Kit (small-block Chevy, 4 pieces) - 4404
Hold-Down Tab Kit (big-block Chevy, 7 pieces) - 4414

OIL FILL HOLE PLUGS
Oil plugs have recessed Edelbrock script and are designed to plug the oil fill hole on any of Edelbrock's Signature Series valve covers or any 1-1/4" diameter fill hole on similar designs. In chrome or rubber.
Hold Down Tabs by Edelbrock
Application Emissions Part #
Chrome Oil Fill Hole Plug - 4415
Rubber PCV Valve Grommets (pair) - 8094

Edelbrock Tech Note PRODUCT EMISSIONS GUIDE
The following guide is designed to help you determine which Edelbrock components are legal for use on your vehicle. Learn more about Edelbrock Product Emissions Guide.

    50-State Legal
    For Racing Use ONLY
    For Use on Pre-Pollution Controlled Vehicles (PPCV)
    Stock Replacement Part
    Engine Swaps