6 Cylinder Chevy Camshafts and Matching Components


PERFORMER-PLUS CAMSHAFTS
Designed for optimum torque from the low-end to the mid-range, Performer-Plus camshafts match with Performer manifolds for vehicles operating from off-idle to 5500 rpm. They are smooth idling cams for daily drivers, trucks, vans, RVs and 4x4s. You can expect a major improvement in throttle response and torque. In the manifold section you'll find torque graphs showing the power gains from Performer manifolds and Performer-Plus cams. All camshafts include flat tappet lifters (except for cams designed for use with stock roller lifters), assembly lube and instructions.
Performer-Plus Camshafts for Chevy by Edelbrock
Application Emissions Part # Cam Card Duration
@ 0.50
Int/Exh
Lift
@ Valve
Int/Exh
Lobe Seps. Intake
Center
Line
Idle Vac.
@ 1000
RPM
2.8L 60° V6 3790 204° / 214° .420" / .442" 112° 107° 16"
200-229 90° V6 2112 204° / 214° .420" / .443" 112° 107° 16"

ROLLIN' THUNDER CAMSHAFTS (HYDRAULIC ROLLER)
Edelbrock Rollin' Thunder camshafts are designed to improve horsepower and torque, produce a great sounding performance idle and provide excellent vacuum at idle to support power accessories. Rollin' Thunder camshafts feature more aggressive lift profiles than possible with conventional flat-tappet hydraulic cams, without excessive valve overlap that can compromise low rpm drivability; reduced friction provided by roller tappets makes this combination of accelerated valve lift and reduced duration possible. Edelbrock Rollin' Thunder camshafts are performance matched to Edelbrock Total Power Package components for proven performance.

    Features Include:
  • Performance - Roller camshafts produce higher lift velocity and faster valve action produces increased horsepower and torque gains
  • Drivability - Produces great sounding idle while providing excellent vacuum at idle to support power accessories
  • Durability - The smaller surface contact area of a roller tappet and reduced friction combined with stronger camshaft material (hardened steel or iron) ensures longer camshaft life
  • Environmental - Can use ILSAC GF-4 oil, which lowers your engines emissions and does not require zinc or phosphate oil additives
  • Economy - Reduced contact friction between the lifter and camshaft increases an engines fuel economy for better mileage potential
Rollin' Thunder Camshafts for Chevy by Edelbrock
Application Emissions Part # Cam Card Duration
@ 0.50
Int/Exh
Lift
@ Valve
Int/Exh
Lobe Seps. Intake
Center
Line
Idle Vac.
@ 1000
RPM
4.3L 90° V6 3714 210° / 214° .479" / .488" 112° 107° 17"

Edelbrock Tech Note PRODUCT EMISSIONS GUIDE
The following guide is designed to help you determine which Edelbrock components are legal for use on your vehicle. Learn more about Edelbrock Product Emissions Guide.

    50-State Legal
    For Racing Use ONLY
    For Use on Pre-Pollution Controlled Vehicles (PPCV)
    Stock Replacement Part
    Engine Swaps