Edelbrock Performance Camshafts- Cam Card Locator

Performance Camshafts and Lifter Kits by Edelbrock
Edelbrock camshafts are matched to Edelbrock Total Power Package components for proven performance, taking the guesswork out of camshaft selection. They are compatible with OEM or Edelbrock hydraulic roller tappets which reduce friction, virtually eliminate break-in problems, and permit higher valve velocities for increased performance.

We are proud to announce the all new Camshaft cam card locator. Please type in the part number of your desired Performance Camshaft into the search field below. Proper search terms are as follows (2102, 5082, 7122).

Please do not use special characters.


 
Search by Part # (Internet Explorer Users Must CLICK Search Button)

Performance Camshafts, Lifter Kits and Matching Valvetrain for 265-350 V8 (1987-Later) Chevy - Edelbrock.com
Search Again Print


Camshaft: Rollin' Thunder Hydraulic Roller

Part #: #2209

Vehicle Type: CHEVROLET

Engine Application: 265-350 V8 (1987-Later)

RPM Range: Idle-5500

DURATION AS ADVERTISED INTAKE: 280° EXHAUST: 290°
DURATION @ .050 INTAKE: 212° EXHAUST: 222°
LIFT @ CAM (Lobe) INTAKE: 0.308" EXHAUST: 0.319"
LIFT @ VALVE INTAKE: 0.462" EXHAUST: 0.479"
LOBE SEPERATION: 112° INTAKE CENTERLINE: 107° IDLE VACUUM @ 1000 RPM: 16"
The information below is for verification of
opening and closing events.
INTAKE TIMING @ .050" LIFT: Opens: 1° BTDC
Closes: 33° ABDC
EXHAUST TIMING @ .050" LIFT: Opens: 48° BBDC
Closes: 6° BTDC
OPTIONAL VALVE SPRINGS: #5703
CAM FEATURES: This camshaft works great when matched with Pro-Flo XT EFI system #3528, and Performer RPM E-Tec cylinder heads #60979; this combo produces 408 HP / 450 ft.-lbs. Uses stock hydraulic roller lifters and pushrods.
INSTALLATION NOTES: Use Edelbrock Performer-Link Timing Chain and Gear Set #7800 or 7802, Accu-Drive gear drive #7890, or Hex-A-Just Timing Set #7331 with camshaft #2208. #2209 should only be matched with Performer Link set #7801. Do not use late model timing sets designed for emission-controlled engines. These timing sets are machined in a retarded position and are not recommended for this camshaft installation. Edelbrock Timing Sets feature three keyways for specified timing selection. Use "0" position for most applications.
 
Footnote 1: Do not use dual valve springs. Use recommended valve springs with closed pressure of 120-130 lbs., open pressure of 320-340 lbs, and max lift of .500".
Footnote 2: Use stock ratio rockers only.