Edelbrock Performance Camshafts- Cam Card Locator

Performance Camshafts and Lifter Kits by Edelbrock
Edelbrock camshafts are matched to Edelbrock Total Power Package components for proven performance, taking the guesswork out of camshaft selection. They are compatible with OEM or Edelbrock hydraulic roller tappets which reduce friction, virtually eliminate break-in problems, and permit higher valve velocities for increased performance.

We are proud to announce the all new Camshaft cam card locator. Please type in the part number of your desired Performance Camshaft into the search field below. Proper search terms are as follows (2102, 5082, 7122).

Please do not use special characters.


 
Search by Part # (Internet Explorer Users Must CLICK Search Button)

Performance Camshafts, Lifter Kits and Matching Valvetrain for Small-Block (1955-86) Chevy - Edelbrock.com
Search Again Print


Camshaft: Rollin' Thunder Hydraulic Roller

Part #: #2210

Vehicle Type: CHEVROLET

Engine Application: Small-Block (1955-86)

RPM Range: 1500-6500

DURATION AS ADVERTISED INTAKE: 296° EXHAUST: 300°
DURATION @ .050 INTAKE: 234° EXHAUST: 238°
LIFT @ CAM (Lobe) INTAKE: 0.359" EXHAUST: 0.365"
LIFT @ VALVE INTAKE: 0.539" EXHAUST: 0.548"
LOBE SEPERATION: 114° INTAKE CENTERLINE: 110° IDLE VACUUM @ 1000 RPM: 13"
The information below is for verification of
opening and closing events.
INTAKE TIMING @ .050" LIFT: Opens: 7° BTDC
Closes: 47° ABDC
EXHAUST TIMING @ .050" LIFT: Opens: 57° BBDC
Closes: 1° ATDC
OPTIONAL VALVE SPRINGS: -
CAM FEATURES: This camshaft works great when matched with Pro-Flo XT EFI wide lobe center EFI system #3528 and Performer RPM E-Tec cylinder heads #60979; this combo produces 440 HP / 425 ft.-lbs. of torque.
INSTALLATION NOTES: Use Edelbrock Performer-Link Timing Chain and Gear Set #7800. Do not use late model timing chain and gear sets that are designed for emission-controlled engines. These timing sets are machined in a retarded position and are not recommended for this camshaft installation. Edelbrock Timing Sets feature three keyways for specified timing selection. Use "0" position for most applications.
 
Footnote 1: Use with high stall torque converter only.
Footnote 2: Do not use dual valve springs. Use recommended or equivalent valve springs.
Footnote 3: Use only stock ratio rocker arms.