Edelbrock Performance Camshafts- Cam Card Locator

Performance Camshafts and Lifter Kits by Edelbrock
Edelbrock camshafts are matched to Edelbrock Total Power Package components for proven performance, taking the guesswork out of camshaft selection. They are compatible with OEM or Edelbrock hydraulic roller tappets which reduce friction, virtually eliminate break-in problems, and permit higher valve velocities for increased performance.

We are proud to announce the all new Camshaft cam card locator. Please type in the part number of your desired Performance Camshaft into the search field below. Proper search terms are as follows (2102, 5082, 7122).

Please do not use special characters.


 
Search by Part # (Internet Explorer Users Must CLICK Search Button)

Performance Camshafts, Lifter Kits and Matching Valvetrain for 454-502 V8 (1990-Later Gen VI) Chevy - Edelbrock.com
Search Again Print


Camshaft: Rollin' Thunder Hydraulic Roller

Part #: #2262

Vehicle Type: CHEVROLET

Engine Application: 454-502 V8 (1990-Later Gen VI)

RPM Range: 1500-6500

DURATION AS ADVERTISED INTAKE: 335° EXHAUST: 329°
DURATION @ .050 INTAKE: 236° EXHAUST: 245°
LIFT @ CAM (Lobe) INTAKE: 0.368" EXHAUST: 0.376"
LIFT @ VALVE INTAKE: 0.625" EXHAUST: 0.639"
LOBE SEPERATION: 112° INTAKE CENTERLINE: 109° IDLE VACUUM @ 1000 RPM: 10"
The information below is for verification of
opening and closing events.
INTAKE TIMING @ .050" LIFT: Opens: 6° BTDC
Closes: 51° ABDC
EXHAUST TIMING @ .050" LIFT: Opens: 54° BBDC
Closes: 11° ATDC
OPTIONAL VALVE SPRINGS:
CAM FEATURES: This camshaft works great when matched with Victor Jr. intake manifold #2902 and Victor Jr. 24° cylinder heads
INSTALLATION NOTES: Use Edelbrock Performer-Link Timing Chain and Gear Set #7810 or Accu-Drive gear drive #7891. Do not use late model timing chain and gear sets that are designed for emissioncontrolled engines. These timing sets are machined in a retarded position and are not recommended for this camshaft installation. Edelbrock Timing Sets feature three keyways for specified timing selection. Use "0" position for most applications.
 
Footnote 1: Use recommended valve springs with closed pressure of 120-130 lbs., open pressure of 320-340 lbs, and max lift of .700".
Footnote 2: Use only stock ratio rocker arms.