Edelbrock Performance Camshafts- Cam Card Locator

Performance Camshafts and Lifter Kits by Edelbrock
Edelbrock camshafts are matched to Edelbrock Total Power Package components for proven performance, taking the guesswork out of camshaft selection. They are compatible with OEM or Edelbrock hydraulic roller tappets which reduce friction, virtually eliminate break-in problems, and permit higher valve velocities for increased performance.

We are proud to announce the all new Camshaft cam card locator. Please type in the part number of your desired Performance Camshaft into the search field below. Proper search terms are as follows (2102, 5082, 7122).

Please do not use special characters.


 
Search by Part # (Internet Explorer Users Must CLICK Search Button)

Edelbrock.com - Camshafts and Lifters


Camshaft: Torker-Plus

Part #: #5082

Vehicle Type: FORD

Engine Application: 351W V8

RPM Range: N/A

DURATION AS ADVERTISED INTAKE: 290° EXHAUST: 300°
DURATION @ .050 INTAKE: 224° EXHAUST: 234°
LIFT @ CAM (Lobe) INTAKE: 0.31" EXHAUST: 0.325"
LIFT @ VALVE INTAKE: 0.496" EXHAUST: 0.52"
LOBE SEPERATION: 110° INTAKE CENTERLINE: 106° IDLE VACUUM @ 1000 RPM: -
The information below is for verification of
opening and closing events.
INTAKE TIMING @ .050" LIFT: Opens: 6° BTDC
Closes: 38° ABDC
EXHAUST TIMING @ .050" LIFT: Opens: 51° BBDC
Closes: 3° ATDC
OPTIONAL VALVE SPRINGS: #5722
CAM FEATURES: Hydraulic flat tappet lifters are included with each camshaft.
INSTALLATION NOTES: Use Edelbrock Performer-Plus Timing Chain and Gear Set #7811, #7820 or Accu-Drive gear drive #7892. Do not use late model timing chain and gear sets that are designed for emission-controlled engines. These timing sets are machined in a retarded position and are not recommended for this camshaft installation. Edelbrock Timing Sets feature three keyways for specified timing selection.
 
Footnote 1: Adjustable pushrods or rocker arms and screw-in studs required.
Footnote 2:
Footnote 3:
Footnote 4: