Edelbrock Performance Camshafts- Cam Card Locator

Performance Camshafts and Lifter Kits by Edelbrock
Edelbrock camshafts are matched to Edelbrock Total Power Package components for proven performance, taking the guesswork out of camshaft selection. They are compatible with OEM or Edelbrock hydraulic roller tappets which reduce friction, virtually eliminate break-in problems, and permit higher valve velocities for increased performance.

We are proud to announce the all new Camshaft cam card locator. Please type in the part number of your desired Performance Camshaft into the search field below. Proper search terms are as follows (2102, 5082, 7122).

Please do not use special characters.


 
Search by Part # (Internet Explorer Users Must CLICK Search Button)

Performance Camshafts, Lifter Kits and Matching Valvetrain for 231-252 V6 Even Fire Buick - Edelbrock.com
Search Again Print


Camshaft: Performer-Plus

Part #: #5487

Vehicle Type: BUICK

Engine Application: 231-252 V6 Even Fire

RPM Range: 1500-5500

DURATION AS ADVERTISED INTAKE: 280° EXHAUST: 290°
DURATION @ .050 INTAKE: 204° EXHAUST: 214°
LIFT @ CAM (Lobe) INTAKE: 0.28" EXHAUST: 0.295"
LIFT @ VALVE INTAKE: 0.448" EXHAUST: 0.472"
LOBE SEPERATION: 112° INTAKE CENTERLINE: 107° IDLE VACUUM @ 1000 RPM: 15"
The information below is for verification of
opening and closing events.
INTAKE TIMING @ .050" LIFT: Opens: 5° ATDC
Closes: 29° ABDC
EXHAUST TIMING @ .050" LIFT: Opens: 44° BBDC
Closes: 10° BTDC
OPTIONAL VALVE SPRINGS: -
CAM FEATURES:
INSTALLATION NOTES: Use Performer-Link Timing Chain and Gear Set, #7829 . Do not use late model timing sets. They are machined in a retarded position and are not recommended for this camshaft installation. Edelbrock Performer-Link True Rolling Timing Sets feature three keyways for specific timing selection. Always use the – or straight-up timing marks when installing Performer-Plus camshafts with Performer-Link Timing Sets.
 
Footnote 1: For non computer-controlled vehicles.
Footnote 2: Use only stock replacement valve springs
Footnote 3: Use only stock ratio rocker arms.