Edelbrock Performance Camshafts- Cam Card Locator

Performance Camshafts and Lifter Kits by Edelbrock
Edelbrock camshafts are matched to Edelbrock Total Power Package components for proven performance, taking the guesswork out of camshaft selection. They are compatible with OEM or Edelbrock hydraulic roller tappets which reduce friction, virtually eliminate break-in problems, and permit higher valve velocities for increased performance.

We are proud to announce the all new Camshaft cam card locator. Please type in the part number of your desired Performance Camshaft into the search field below. Proper search terms are as follows (2102, 5082, 7122).

Please do not use special characters.


 
Search by Part # (Internet Explorer Users Must CLICK Search Button)

Performance Camshafts, Lifter Kits and Matching Valvetrain for 390-428 V8 Ford - Edelbrock.com
Search Again Print


Camshaft: Performer RPM

Part #: #7106

Vehicle Type: FORD

Engine Application: 390-428 V8

RPM Range: 1500-6500

DURATION AS ADVERTISED INTAKE: 296° EXHAUST: 296°
DURATION @ .050 INTAKE: 236° EXHAUST: 236°
LIFT @ CAM (Lobe) INTAKE: 0.325" EXHAUST: 0.325"
LIFT @ VALVE INTAKE: 0.572" EXHAUST: 0.572"
LOBE SEPERATION: 108° INTAKE CENTERLINE: 103° IDLE VACUUM @ 1000 RPM: 11"
The information below is for verification of
opening and closing events.
INTAKE TIMING @ .050" LIFT: Opens: 15° BTDC
Closes: 41° ABDC
EXHAUST TIMING @ .050" LIFT: Opens: 51° BBDC
Closes: 5° ATDC
OPTIONAL VALVE SPRINGS: #5767
CAM FEATURES: 418 HP & 434 ft.-lbs. with #7105 intake & #60069 heads.
INSTALLATION NOTES: Use Edelbrock Performer RPM Timing Chain and Gear Set #7808. Do not use late model timing chain and gear sets that are designed for emission-controlled engines. These timing sets are machined in a retarded position and are not recommended for this camshaft installation. Edelbrock Timing Sets feature three keyways for specified timing selection. Use – position for most applications.
 
Footnote 1: Will not work in 427 side-oilers. Isky spacer #350AW required for all FE Fords 1962 & earlier required.
Footnote 2: Do not use dual valve springs .Use only recommended Edelbrock Sure Seat Valve Springs #5767.
Footnote 3: Use stock ratio rocker arms only (1.76:1).