Edelbrock Performance Camshafts- Cam Card Locator

Performance Camshafts and Lifter Kits by Edelbrock
Edelbrock camshafts are matched to Edelbrock Total Power Package components for proven performance, taking the guesswork out of camshaft selection. They are compatible with OEM or Edelbrock hydraulic roller tappets which reduce friction, virtually eliminate break-in problems, and permit higher valve velocities for increased performance.

We are proud to announce the all new Camshaft cam card locator. Please type in the part number of your desired Performance Camshaft into the search field below. Proper search terms are as follows (2102, 5082, 7122).

Please do not use special characters.


 
Search by Part # (Internet Explorer Users Must CLICK Search Button)

Performance Camshafts, Lifter Kits and Matching Valvetrain for 343-401 V8 AMC - Edelbrock.com
Search Again Print


Camshaft: Performer RPM

Part #: #7132

Vehicle Type: AMC

Engine Application: 343-401 V8

RPM Range: 1500-6500

DURATION AS ADVERTISED INTAKE: 310° EXHAUST: 320°
DURATION @ .050 INTAKE: 234° EXHAUST: 244°
LIFT @ CAM (Lobe) INTAKE: 0.325" EXHAUST: 0.34"
LIFT @ VALVE INTAKE: 0.52" EXHAUST: 0.544"
LOBE SEPERATION: 112° INTAKE CENTERLINE: 107° IDLE VACUUM @ 1000 RPM: 11"
The information below is for verification of
opening and closing events.
INTAKE TIMING @ .050" LIFT: Opens: 10° BTDC
Closes: 44° ABDC
EXHAUST TIMING @ .050" LIFT: Opens: 59° BBDC
Closes: 5° ATDC
OPTIONAL VALVE SPRINGS: -
CAM FEATURES: 433 HP & 489 ft.-lbs. with #7531 intake & #60119 heads.
INSTALLATION NOTES: Use Performer-Link Timing Set, #7818. Do not use late model timing sets. They are machined in a retarded position and are not recommended for this camshaft installation. Edelbrock Performer-Link True Rolling Timing Sets feature three keyways for specific timing selection. Always use the – or straight-up timing mark when installing Performer RPM camshafts with Performer-Link Timing Sets.
 
Footnote 1: Use only Edelbrock Cylinder Heads (Include Proper Valve Springs),or Crane # 99838 Valve Springs with Stock Iron Cylinder Heads. Use stock ratio rocker arms only.
Footnote 2: For non computer controlled vehicles.