Performance Carburetors And Matching Accessories

Performance Carburetors And Matching Accessories by Edelbrock
Every Edelbrock Carburetor is manufactured in the USA and has been specifically designed and tuned by Edelbrock engineers to provide the widest overall torque range. For unmatched street performance, combine them with Edelbrock Performer, Performer Air-Gap, Performer EPS, Performer RPM, RPM Air-Gap or Torker II manifold and camshaft combinations, as well as most stock and other aftermarket manifolds of similar design.

    Performer Series® Features:
  • Edelbrock carbs bolt on and run right out of the box
  • Dependable street performance and smooth throttle response throughout the power band
  • Factory set float levels, adjustments are rarely needed
  • Change jets, adjust floats and replace needles/seats without draining fuel or removing carb from manifold
  • Two-piece design means no gaskets below the fuel level for leak-free operation
  • Installation & tuning DVD included with every "NEW" carb
  • Performer Series® available with choice these finishes; satin, Endurashine® , and black powder coated finish
    Thunder Series AVS® Features:
  • The same outstanding features as the Performer Series® and more!
  • Adjustable Valve Secondary allows for simple and accurate tuning across the RPM range
  • Exclusive twelve month Thunder Series AVS® "complete satisfaction" warranty
  • Optional single or dual fuel inlet allows for total fuel plumbing flexibility
  • The most innovative and dependable street performance carburetor available
  • Made in the USA

 
PERFORMER SERIES® CARBURETORS
A precisely tuned, quality-built carburetor should be able to handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characteristics make our carburetors outstanding street performers. The first one is that they use metering rods to transition between circuits. They are unaffected by engine backfires, which means that there are no power valves to blow out, and the rods can be changed in seconds without carburetor removal or fuel draining. Secondly, they have the unique ability to "hold a tune", so once they're tuned, they stay tuned. What this means to you is that compared to other carburetors, the performance remains consistent and the calibration stays unchanged. The lightweight all-aluminum body features a two-piece body that resists warping and is compatible with gasohol and blended fuels. The simple tub-type bowls and rear-pivot floats all contribute to a carburetor that's reliable, user-friendly and is easily tuneable for miles and miles of trouble-free operation.

Learn More

Performer Series® Carburetor by Edelbrock
 
THUNDER SERIES AVS® CARBURETORS
The next step up from our Performer Series® Carburetors is our Thunder Series AVS®. Designed and calibrated to deliver optimum street performance in hundreds of applications, Edelbrock Thunder Series AVS® Carbs are undeniably the most innovative and dependable street performance carburetors available today. Primary and secondary booster clusters offer the most accurate and up-to-date calibration available for today's fuels and octane levels. The Thunder Series' unique Qwik-Tune Secondary Air Valve allows for limitless calibration of the secondary circuit with simple hand tools while on your vehicle. It's quick. It's simple. It's effective. It can be easily adjusted - in seconds - to suit your application... no extra parts required to achieve optimum performance.

Learn More

Thunder Series AVS® Carburetor by Edelbrock
 
MARINE SERIES CARBURETORS
For use in marine applications, these Edelbrock carbs comply with U.S. Coast Guard safety standards. Cast surfaces are iridited with PTFE-coated shafts and pump arm for maximum protection. Other features include modified bowl venting, specially designed throttle shafts, accelerator pump seal, 3/8" inverted flare fuel inlet fitting, tube in airhorn for fuel pump vent, 5-1/8" flame arrestor flange, universal throttle lever and revised secondaries for improved transient performance. Note: These carbs have no vacuum ports and are not for automotive use.

Learn More

Marine Series Carburetor by Edelbrock
 
VINTAGE 94™ TWO-BBL. CARBURETORS
Built around Edelbrock's reputation of bolt-on performance carburetors, the Edelbrock 94® two-barrel carburetor provides nostalgic and period correct hot rods and restorations with the most accurate and best performing carburetor on the market. The Edelbrock 94® features a die-cast bowl and air horn with an aluminum 3-bolt base. A secondary version of this carburetor is available and features no choke, making it a must have for multiple carb setups. They both feature an extended throttle shaft to make it easier to install dual and triple carburetor combinations, especially when used with Edelbrock's exclusive progressive linkage.

Learn More

Vintage 94™ Two-Barrel Carburetors by Edelbrock
 
MANIFOLD & CARBURETOR KITS
Available for small-block and big-block Chevys, Chryslers, Fords and Pontiac, Edelbrock is making it easy to upgrade your induction system with the best combination of proven Edelbrock performance in a single box. The new Manifold and Carb Kits feature our show-quality EnduraShine™ finish and provide everything needed to install an Edelbrock manifold and carburetor on street rods or muscle cars.

Learn More

Manifold & Carburetor Kits by Edelbrock
 
EDELBROCK CARBURETOR ACCESSORIES
Edelbrock offers a large assortment of accessories for your Performer or Thunder Series AVS® Carburetor. This includes performance products as well as replacement components to keep your carburetor running at full strength. In this section you will see products such as service/maintenance parts, calibration kits, fuel filters and inlet kits.

Learn More

Performer and Thunder Series AVS® Accessories by Edelbrock
 
QUADRAJET CARBURETOR ACCESSORIES
Edelbrock offers a large assortment of accessories for your Q-Jet Carburetor. This includes performance products as well as replacement components to keep your Edelbrock, GM Rochester Q-Jet Carburetor running at full strength. In this section you will see products such as service/maintenance parts, calibration kits, fuel filters and inlet kits.

Learn More

QuadraJet Carburetor Accessories by Edelbrock
 
NON-EDELBROCK CARB ACCESSORIES
Edelbrock now offers replacement service parts for popular high performance Demon®, Holley® and Quick Fuel® Carburetors. These component packages will feature quick reference guides for easy identification and proper application selection.

Learn More

Non-Edelbrock Carburetor Accessories by Edelbrock
 
PDF INSTALLATION INSTRUCTIONS
Download a printer friendly Warranty and Installation PDF (you will need Acrobat Reader® in order to view this PDF). If you do not have this installed you can download it by clicking the icon.
 
Installation Instructions for CarburetorsCarburetor Owners Manual
Edelbrock Tech Note TECH NOTES: Edelbrock Performer And Thunder Series Carburetor Features. Click on Image to see Full Size Diagram.

Edelbrock Performer And Thunder Series Carburetor Features