Performer & Thunder Series AVS® Fuel Inlet / Filter Kits


SINGLE FEED FUEL INLET & FILTER KITS
These fuel inlets for Edelbrock carburetors provide a clean and custom plumbing solution. The drop-down design routes the fuel line on the right-hand (passenger side) of the carburetor below the linkage and choke housing. The #8126 includes a barbed end for a push-on 3/8" rubber fuel line. The #8131 and #8134 include an aluminum fuel filter with a 40 micron filter element and the -6 AN male inlet will accept an Edelbrock fuel line kit for a complete fuel pump to carburetor plumbing solution. They are manufactured of chrome plated steel and include a 5/8" -20 threaded banjo bolt with gaskets.
Single Feed Fuel Inlet & Filter Kits by Edelbrock
Application Emissions Part #
Chromed Steel Fuel Line with No Fuel Filter and 3/8" Barbed End Inlet - 8126
Black Steel Fuel Line with No Fuel Filter and 3/8" Barbed End Inlet - 81263
Single-Feed Fuel Line with Polished Aluminum Filter (replacement filter only #8129) - 8131
Single-Feed Fuel Line with Blue Anodized Aluminum Filter (replacement filter only #8130) - 8134
Single-Feed Fuel Line with Black Anodized Aluminum Filter (replacement filter only #650133) - 81343
-6 AN Female to Barb (when using push-on fuel line with #8131 and #8134) - 624010

DUAL FEED FUEL INLET & FILTER KITS
These dual feed fuel inlets are designed specifically for Edelbrock Thunder Series AVS carburetors. The drop-down design routes the fuel line on the right-hand (passenger side) of the carburetor below the linkage and choke housing. Options include a barbed end for a push-on 3/8" fuel line or -6 AN aluminum fuel filter with a 40 micron filter element. Match with Edelbrock fuel line kit for a complete fuel pump to carburetor plumbing solution. They are manufactured of chrome plated steel and include a 5/8" -20 threaded banjo bolt with gaskets. Dual-Feed Fuel Line with Polished.
Dual Feed Fuel Inlet & Filter Kits by Edelbrock
Application Emissions Part #
Dual-Feed Fuel Line with Polished Aluminum Filter (replacement filter only #8129) - 8128
Chromed Steel Dual-Feed Fuel Line with No Fuel Filter and 3/8" Barbed End Inlet - 8132
Dual-Feed Fuel Line with Blue Anodized Aluminum Filter (replacement filter only #8130) - 8133
-6 AN Female to Barb (when using push-on fuel line with #8128 and #8133) - 624010

HIGH FLOW FUEL FILTERS
Designed for high volume fuel systems these high-quality fuel filters are manufactured of billet aluminum and offer 40 micron filtration. These filters are 3" long by 1-1/4" in diameter and include a 40 micron disc element with a -6 male inlet/outlet. Match with Edelbrock pump-to-carb fuel line kits for a complete plumbing solution.
Performance High Flow Filters by Edelbrock
Application Emissions Part #
Polished Aluminum Filter - 8129
Blue Anodized Aluminum Filter - 8130
Black Anodized Aluminum Filter - 650133
Replacement Filter Element - 8137
-6 AN Female to Barb (when using push-on fuel line with #8128 and #8133) - 624010

DUAL-QUAD FUEL HOSE KIT
Supplies fuel to two Edelbrock carbs when used on Edelbrock Dual-Quad manifolds. Use with a fuel hose kit such as our #8122 or #8127. 6-7/16" center-to-center, 1/8"-NPT fuel pressure port and a 3/8"-NPT fuel inlet.
Dual-Quad Fuel Hose Kits by Edelbrock
Application Emissions Red Endura ProClassic
Dual-Quad Fuel Line Kit - 8088 8091 80913

UNIVERSAL SINGLE-FEED FUEL HOSE & FILTER KIT
Designed for quick installation when retaining part of the stock steel fuel line, simply cut the stock line and install the compression fitting. Use supplied neoprene hose, clamp and special fuel filter and connect to carb. Will work with either 5/16" or 3/8" lines. Kit includes fuel filter, special fittings to adapt 5/16" and 3/8" steel line to 3/8" fuel hose, 24" of 3/8" fuel hose (SAE 30R7) and four stainless steel worm-type hose clamps.
Universal Single-Feed Fuel Hose & Filter Kit by Edelbrock
Application Emissions Part #
Universal Single-Feed Fuel Hose & Filter Kit - 8135

UNIVERSAL DUAL-FEED FUEL HOSE
Made from aircraft quality buna-N neoprene hose encased in braided stainless steel, this fuel line kit is temperature, gas and oil resistant. Made for 3/8" NPT fitting, the fuel line is adjustable between the carb bowls from 7-1/2" to 11-1/2". Includes 1/8" pipe fitting, plug for fuel pressure gauge, etc. Hose nipple not included.
Universal Dual-Feed Fuel Hose by Edelbrock
Application Emissions Part #
Universal Dual-Feed Fuel Hose - 8101

FUEL PUMP TO CARB INLET HOSE KITS
These high-quality fuel line kits offer a clean and precise fuel supply line for mechanical fuel pumps with 3/8" NPT outlet to Edelbrock Single-Feed or Dual-Feed fuel inlet kits #8128, #8131, #8133, and #8134. These hose kits are pre-assembled hose with hose ends and are available with stainless steel braided hose or black nylon fabric ProClassic hose.
Fuel Pump to Carb Inlet Hose Kits by Edelbrock
Application Emissions Stainless ProClassic
Braided Stainless Steel Fuel Hose Kit (For S/B Chevy, S/B Chrysler, and B/B Chrysler) - 8123 81233
Braided Stainless Steel Fuel Hose Kit (For AMC, B/B Chevy, S/B Ford, 429/460 Ford & Pontiac) - 8124 81243
Braided Stainless Steel Fuel Hose Kit (For Small-Block Fords) - 8125 -

FUEL PUMP TO CARB HOSE KITS
These high-quality fuel line kits offer a clean and precise fuel supply line for mechanical fuel pumps with 3/8" NPT to the 5/8" -20 fuel inlet on Edelbrock Performer Series and Thunder Series AVS Carbs. They are manufactured with Russell ProClassic hose and include fuel filter, 5/8" -20 banjo bolt and gaskets. Will not work with OEM or equivalent fuel pumps.
Fuel Pump to Carb Hose Kits by Edelbrock
Application Emissions Part #
ProClassic Fuel Hose with Street Fuel Filter - 8102
ProClassic Fuel Hose with Competition Fuel Filter - 8103

FUEL DISTRIBUTION BLOCKS
Edelbrock has reintroduced the vintage cast aluminum fuel blocks for dual, triple and quad carb applications for your hot rod or custom vehicle. Edelbrock fire wall mounted fuel blocks feature a single 3/8" NPT inlet and two, three or four 1/4" NPT outlets, depending on application. Each fuel block has four holes for mounting to a fire wall and are available with a satin aluminum or polished finish.

The Edelbrock Mini Fuel Block #1286 was first introduced in the late 50's and is a great solution for any dual or triple carb application where no mounting surface is available. It features a single 1/4" inlet with three 1/4" outlets with a polished finish and period correct Edelbrock logo decal. Mini Fuel Distribution Kit #1281 - this kit includes everything needed to plumb a dual or triple carb setup. All of them are a great way to finish off your Edelbrock 94 carburetor and intake manifold installation!

Fuel Pump to Carb Hose Kits by Edelbrock
Application Emissions Satin Polished
Dual Outlet Fuel Block - 1280 12801
Tripple Outlet Fuel Block - 1285 12851
Quad Outlet Fuel Block - 1280 12801
Mini Triple Outlet Fuel Block - - 1286
Edelbrock Installation Note INSTALLATION NOTES: Triple fuel blocks can also be used with any dual carb installation by blocking off the unused outlet with pipe plug #662043 or any similar 1/4" -18 NPT plug. The third outlet can also be run to fuel pressure gauge if desired.

Edelbrock Tech Note PRODUCT EMISSIONS GUIDE
The following guide is designed to help you determine which Edelbrock components are legal for use on your vehicle. Learn more about Edelbrock Product Emissions Guide.

    50-State Legal
    For Racing Use ONLY
    For Use on Pre-Pollution Controlled Vehicles (PPCV)
    Stock Replacement Part
    Engine Swaps