Edelbrock Cylinder Heads For Flathead Ford

Performance Aluminum Cylinder Heads For Flathead Ford by Edelbrock
Ford Flatheads feature the original Edelbrock script logo design for Fords and Mercurys, and are casted at the Edelbrock Foundry in the USA of T-6 tempered A356 aluminum. These heads are rugged, ribbed internally and externally, with a large water capacity and excellent breathing characteristics. The 65cc heads support 8.0:1 compression ratio on blocks with a 3/16" base relief (stock bore and stroke), compression ratio increase is approximately 3/10 of a percent with each 1/8" stroke. High Lift/Large Chamber versions feature a new "raised roof" combustion chamber design that is CNC machined for high lift cams and is perfect for reducing compression in supercharger applications or on low octane fuel. High Lift heads have increased valve clearance and increased flow capacity. Match these heads with our popular Ford Flathead Intake Manifolds.

FORD FLATHEAD - SCRIPT LOGO
Ford Flatheads With Script Logo by Edelbrock
Application Chamber Volume Emissions Part #
1938-48 Ford/Mercury, 24 stud 65cc 1125
1938-48 Ford/Mercury, 24 stud High Lift/Large Chamber 74cc 1127
1949-53 Ford/Mercury, 24 stud 65cc 1115
1949-53 Ford/Mercury, 24 stud High Lift/Large Chamber 74cc 1116
Edelbrock Installation Note INSTALLATION NOTE: Flathead head copper gaskets for 1938-48 use Victor #3036; or Fel-Pro® #7548; or Edelbrock Head Gasket Set #7394; for 1949-53 use Fel-Pro #1055 and Fel-Pro #1056 or Edelbrock Head Gasket Set #7393. Recommended spark plugs are Champion RC12YC or equivalent 14mm x 3/4" reach with flat gasket seat. Head stud kit for 1938-48, use #8505; Head stud kit for 1949-53, use #8502. Generator stud kit for 1938-48, use #8506.

FORD FLATHEAD - BLOCK LOGO
Ford Flatheads With Block Logo by Edelbrock
Application Chamber Volume Emissions Part #
1938-48 Ford/Mercury, 24 stud 65cc 1126
1938-48 Ford/Mercury, 24 stud High Lift/Large Chamber 74cc 1128
Edelbrock Installation Note INSTALLATION NOTE: Flathead head copper gaskets for 1938-48 use Victor #3036; or Fel-Pro® #7548; or Edelbrock Head Gasket Set #7394; for 1949-53 use Fel-Pro #1055 and Fel-Pro #1056 or Edelbrock Head Gasket Set #7393. Recommended spark plugs are Champion RC12YC or equivalent 14mm x 3/4" reach with flat gasket seat. Head stud kit for 1938-48, use #8505; Head stud kit for 1949-53, use #8502. Generator stud kit for 1938-48, use #8506.

FORD FLATHEAD - HEAD STUD KITS
Ford Flatheads Stud Kits by Edelbrock
Application Emissions Part #
Head Stud Kit for 1938-48 - 8505
Head Stud Kit for 1949-53 - 8502
Generator Stud Kit for 1938-48 - 8506

Edelbrock Tech Note TECH NOTE: Please view Cylinder Head Flow Data and Valve Springs & Retainers for all Edelbrock Performance Aluminum Cylinder Heads.
Edelbrock Tech Note PRODUCT EMISSIONS GUIDE
The following guide is designed to help you determine which Edelbrock components are legal for use on your vehicle. Learn more about Edelbrock Product Emissions Guide.

    50-State Legal
    For Racing Use ONLY
    For Use on Pre-Pollution Controlled Vehicles (PPCV)
    Stock Replacement Part
    Engine Swaps