Performer RPM Cylinder Heads For Ford 460


Performer RPM Cylinder Heads for Ford 460 by Edelbrock
 
  • Cylinder Head Specifications:
  • Combustion chamber volume: 75cc / 95cc
  • Intake runner volume: 292cc
  • Exhaust runner volume: 100cc
  • Intake valve diameter: 2.19"
  • Exhaust valve diameter: 1.76"
  • Valve stem diameter: 11/32"
  • Valve guides: Manganese bronze
  • Deck thickness: 5/8"
  • Valve spring diameter: 1.55"
  • Valve spring maximum lift: .700"
  • Rocker stud: 7/16"
  • Guideplate: Hardended steel
  • Pushrod diameter: 3/8"
  • Valve angle: TBD
  • Exhaust port location: Stock
  • Spark plug fitment: 14mm x 3/4 reach, gasket seat
 
    PERFORMER RPM 460 FEATURES:
  • Designed for 1968-87 429/460 Fords
  • Ideal for high-performance street and drag racing
  • Over 500+ hp at 6500 rpm (+30 hp more than ported factory heads) and 525+ ft-lbs. of torque at 4500 rpm with the Performer RPM Total Power Package®
  • Intake ports can be opened up to match Victor manifolds #2965 and #2966
  • NHRA-accepted for Super Stock only
  Bare (Single) Complete (Single)
Application Dyno Emissions Satin Satin
EQUIPPED WITH SPRINGS FOR USE IN HYDRAULIC ROLLER CAMSHAFT APPLICATIONS
Performer RPM 460 (95cc) - 60689 60665
Performer RPM 460 (75cc) - 60699 60675
 
EQUIPPED WITH SPRINGS FOR USE IN HYDRAULIC FLAT TAPPET CAMSHAFT APPLICATIONS
Performer RPM 460 (95cc) - 60689 60669
Performer RPM 460 (75cc) - 60699 60679
Performer RPM 460 (95cc) - For NHRA Super Stock only - 60697 -
Performer RPM 460 (75cc) - For NHRA Super Stock only - 60687 -
Edelbrock Installation Note INSTALLATION NOTE: Performer RPM 460 heads accept factory exhaust, aftermarket headers and factory valvetrain components. Requires the use of 3/8" diameter pushrods. Match with Edelbrock head gasket sets. Bare heads will have valve guides and seats installed, but will require final sizing and a valve job to match the valves you will be using. Recommended spark plugs are Champion RC12YC or equivalent 14mm x 3/4" reach with flat gasket seat. Deck thickness: 5/8", rocker stud diameter: 7/16", pushrod diameter: 3/8" (width of slot in guide plate).
#60669 | #60679: Flow Numbers as tested by Edelbrock's SuperFlo SF-1020 flow bench @ 28" H2O
Valve Lift .100" .200" .300" .400" .500" .600" .700"
Intake 76 140 207 260 300 319 326
Exhaust 67 118 153 180 200 207 207
Edelbrock Tech Note TECH NOTE: Please view Cylinder Head Flow Data and Valve Springs & Retainers for all Edelbrock Performance Aluminum Cylinder Heads.
Edelbrock Tech Note PRODUCT EMISSIONS GUIDE
The following guide is designed to help you determine which Edelbrock components are legal for use on your vehicle. Learn more about Edelbrock Product Emissions Guide.

    50-State Legal
    For Racing Use ONLY
    For Use on Pre-Pollution Controlled Vehicles (PPCV)
    Stock Replacement Part
    Engine Swaps