Performer RPM Cylinder Heads For Ford FE


Performer RPM Cylinder Heads for Ford FE by Edelbrock
 
  • Cylinder Head Specifications:
  • Combustion chamber volume: 72cc / 76cc
  • Intake runner volume: 170cc
  • Exhaust runner volume: 125cc
  • Intake valve diameter: 2.09"
  • Exhaust valve diameter: 1.66"
  • Valve stem diameter: 3/8"
  • Valve guides: Manganese bronze
  • Deck thickness: 5/8"
  • Valve spring diameter: 1.55"
  • Valve spring maximum lift: .600"
  • Rocker stud: N/A
  • Guideplate: N/A
  • Pushrod diameter: 3/8"
  • Valve angle: 13°
  • Exhaust port location: Stock
  • Spark plug fitment: 14mm x 3/4 reach, gasket seat
 
    PERFORMER RPM FE FEATURES:
  • Direct bolt-on heads for 1961-76 390-427-428 Fords
  • 428 Cobra Jet-sized valves promote excellent flow for streetable power
  • #60089 can be machined to accept 2.19" intake and 1.73" exhaust valves
  • Rocker shaft stud kit #6009 provides better rocker shaft retention and is highly recommended for use with Edelbrock FE heads. It eliminates wearing of the threads and the possibility of bottoming the rocker shaft bolts in the head.
  Bare (Single) Complete (Single)
Application Dyno Emissions Satin Satin
EQUIPPED WITH SPRINGS FOR USE IN HYDRAULIC ROLLER CAMSHAFT APPLICATIONS
Performer RPM 390-428 Cobra Jet (72cc) - 60059 60065
Performer RPM 427 low-riser/medium-riser (76cc) - - 60089 60075
 
EQUIPPED WITH SPRINGS FOR USE IN HYDRAULIC FLAT TAPPET CAMSHAFT APPLICATIONS
Performer RPM 390-428 Cobra Jet (72cc) - 60059 60069
Performer RPM 427 low-riser/medium-riser (76cc) - 60089 60079
Rocker shaft stud kit for all Edelbrock FE heads - - 6009 -
Edelbrock Installation Note INSTALLATION NOTE: Match with Edelbrock head gasket sets. 76cc heads have vertical bolt pattern only, 390 GT exhaust will not fit. Bare heads will have valve guides and seats installed, but will require final sizing and a valve job to match the valves you will be using. Recommended spark plugs are Champion RC12YC or equivalent 14mm x 3/4" reach with flat gasket seat. Deck thickness: 5/8".
#60069: Flow Numbers as tested by Edelbrock's SuperFlo SF-1020 flow bench @ 28" H2O
Valve Lift .100" .200" .300" .400" .500" .600" .700"
Intake 88 153 195 233 265 270 -
Exhaust 64 113 148 171 183 200 -
Edelbrock Tech Note TECH NOTE: Please view Cylinder Head Flow Data and Valve Springs & Retainers for all Edelbrock Performance Aluminum Cylinder Heads.
Edelbrock Tech Note PRODUCT EMISSIONS GUIDE
The following guide is designed to help you determine which Edelbrock components are legal for use on your vehicle. Learn more about Edelbrock Product Emissions Guide.

    50-State Legal
    For Racing Use ONLY
    For Use on Pre-Pollution Controlled Vehicles (PPCV)
    Stock Replacement Part
    Engine Swaps