Performer Cylinder Heads For S/B Ford


Performer Cylinder Heads For S/B Ford by Edelbrock
 
  • Cylinder Head Specifications:
  • Combustion chamber volume: 60cc
  • Intake runner volume: 170cc
  • Exhaust runner volume: 60cc
  • Intake valve diameter: 1.90" / 2.02"
  • Exhaust valve diameter: 1.60"
  • Valve stem diameter: 11/32"
  • Valve guides: Manganese bronze
  • Deck thickness: 5/8"
  • Valve spring diameter: 1.460"
  • Valve spring maximum lift: .575"
  • Rocker stud: 3/8"
  • Guideplate: Hardended steel
  • Pushrod diameter: 5/16"
  • Valve angle: 20°
  • Exhaust port location: Stock
  • Spark plug fitment: 14mm x 3/4 reach, gasket seat
 
    STREET LEGAL PERFORMER FORD FEATURES:
  • 50-state street legal heads provide outstanding bolt-on performance for 1965-95 289, 302 and 351W
  • 1.90" intake valves are for use with stock pistons
  • High-flow 2.02" intake valves are for use with pistons notched for valve clearance
  • Will not accept rail rockers
  • 289-302 V8's require head bolt bushing #9680 and either head bolt kit #8552 (7/16") or stock bolts
  Bare (Single) Complete (Single)
Application Dyno Emissions Satin Satin
EQUIPPED WITH SPRINGS FOR USE IN HYDRAULIC FLAT TAPPET CAMSHAFT APPLICATIONS
Street Legal Performer with 1.90" intake valves 60319 60329
Street Legal Performer with 2.02" intake valves - 60349 60359
Edelbrock Installation Note INSTALLATION NOTE: Hardened pushrods required, use Edelbrock #9632 (flat tappet only). Will not accept rail rockers. 289-302 V8s require Head Bolt Bushings #9680 and either Head Bolt Kit #8552 (7/16") or stock head bolts. Match with Edelbrock head gasket sets. Bare heads will have valve guides and seats installed, but will require final sizing & a valve job to match the valves you will be using. Recommended spark plugs are Champion RC12YC or equivalent 14mm x 3/4" reach with flat gasket seat.
#60329: Flow Numbers as tested by Edelbrock's SuperFlo SF-1020 flow bench @ 28" H2O
Valve Lift .100" .200" .300" .400" .500" .600" .700"
Intake 72 132 183 216 245 249 244
Exhaust 57 104 142 159 170 174 175
#60359: Flow Numbers as tested by Edelbrock's SuperFlo SF-1020 flow bench @ 28" H2O
Valve Lift .100" .200" .300" .400" .500" .600" .700"
Intake 70 128 183 219 251 255 246
Exhaust 57 104 142 163 170 174 175
Edelbrock Tech Note TECH NOTE: Please view Cylinder Head Flow Data and Valve Springs & Retainers for all Edelbrock Performance Aluminum Cylinder Heads.
Edelbrock Tech Note PRODUCT EMISSIONS GUIDE
The following guide is designed to help you determine which Edelbrock components are legal for use on your vehicle. Learn more about Edelbrock Product Emissions Guide.

    50-State Legal
    For Racing Use ONLY
    For Use on Pre-Pollution Controlled Vehicles (PPCV)
    Stock Replacement Part
    Engine Swaps