Edelbrock Performance Honda & Acura Throttle Bodies


HONDA & ACURA 65MM THROTTLE BODIES
Designed by Edelbrock, these direct bolt-on throttle bodies come complete with a new throttle position sensor and bore area that's 18% larger than stock for increased performance. Edelbrock street legal throttle bodies bolt directly to the stock manifold with mounts for stock sensors and vacuum lines. They are the racers choice for accurately controlling airflow into the Edelbrock Victor X manifold but are also engineered to work perfectly on an OE intake. The large bore area is capable of enough airflow to supply full tilt alcohol and turbocharged drag engines making upwards of 800 hp.
Honda & Acura 65mm Throttle Bodies by Edelbrock
Application Emissions Part #
65mm 1.8L 1994-01 Acura Integra GSR (B18C) 4790
65mm 1.8L 1996-01 Acura Type R Integra (B18C5) 4789
65mm 1992-00 Honda Civic with a Performer X manifold (D16Z6, D16Y8, D15B7) 4791
65mm 1992-95 Honda Prelude with a stock manifold (H22 or H23) 4791
Edelbrock Installation Note INSTALLATION NOTE: #4791 will require port matching with a stock or Performer X manifold for optimal performance. #4791 does not support factory cruise control or auto trans cable.

HONDA & ACURA 70-75MM THROTTLE BODIES
Based on our 5.0L Mustang throttle bodies, the Victor 70mm and 75mm race throttle bodies can be easily adapted to a wide variety of applications. We eliminated the idle air motor mount and all unnecessary vacuum tubes, making these throttle bodies especially well suited for boosted applications. The throttle arm has a cable wheel with multiple take-off points. They are cast and fully machined by Edelbrock, then assembled by Magneti Marelli USA and come complete and ready to run with a throttle position sensor installed and pre-set. These throttle bodies can be adapted to a number of applications using our 1/2" thick spacer/adapters. Intake port matching will be required.
Honda & Acura 70mm Throttle Bodies by Edelbrock
Application Emissions Part #
70mm Throttle Body (629 cfm) 3811
75mm Throttle Body (700 cfm) 3812
70mm Spacer/Adapter for Honda and Acura 38112
75mm Spacer/Adapter for Honda and Acura 38122
70mm Universal Spacer/Adapter (undrilled) 38113
75mm Universal Spacer/Adapter (undrilled) 38123

Edelbrock Tech Note PRODUCT EMISSIONS GUIDE
The following guide is designed to help you determine which Edelbrock components are legal for use on your vehicle. Learn more about Edelbrock Product Emissions Guide.

    50-State Legal
    For Racing Use ONLY
    For Use on Pre-Pollution Controlled Vehicles (PPCV)
    Stock Replacement Part
    Engine Swaps