Edelbrock High Performance Gaskets


GASKET APPLICATION REFERENCE GUIDE
Any gasket can create a seal, but a good gasket can do it with less clamping force, and for a longer period of time. Edelbrock's gaskets are not only manufactured from extremely high quality materials, but they're also designed specifically to fit our intakes and cylinder heads, so there's no chance that our gaskets will interfere with the operation of either component. These gaskets also work with most stock cylinder heads and intakes, aluminum or cast-iron, as well as other aftermarket components. Top quality Edelbrock gaskets ensure a perfect seal every time.
High Performance Gaskets by Edelbrock
Year & Model Head Gasket
Sets (A)
Head Gaskets Head Gasket
Specs
Intake Gaskets Intake Gasket
Specs
Exhaust Gaskets Port Size Valve Cover
Gaskets
Valve Cover
Gasket Thickness
AMC/JEEP
1967-69 290-390;
1970-91 290-304-343; 360-390-401
7372 7329 4.275" bore
0.045" compressed
10.60cc volume
7213 port 1.13" x 2.21"
.060" thickness
7239 1.80" x 1.30" 7532 1/4"
 
BUICK
1967-76 400-455 7369 7346 4.400" bore
0.050" compressed 12.50cc volume
7246 (C) port 1.15" x 2.38"
.032" thickness
7247 1.20" x 1.63" 7546 3/16"
 
CHEVROLET
1985-95 V6
200-229-262 (3.8 and 4.3L)
- - - 7209 port 1.28" x 2.10"
.060" thickness
- - - -
1958-1986
302-327-350 S/B
7361 7310 4.125" bore
0.039" compressed 8.70cc volume
7201
72018
1.28" x 2.09"
.060" thickness
Set of (10 pr.) #7201
7204 1.50" x 1.50" 7549 5/16"
1958-1986 400 S/B - - - 7201 port 1.28" x 2.09"
.060" thickness
7204 1.50" x 1.50" 7549 5/16"
Edelbrock 23° S/B Victor Jr.
and Victor High-Port Intakes
- - - 7217 (K) port size 1.31" x 2.02" .060" thickness - - - -
1958-1986
E-Tec 302-327-350 S/B
7367 7310 4.125" bore
0.039" compressed 8.70cc volume
7235 (C)
72358
port 1.08" x 2.11"
.120" thickness
Set of (10 pr.) #7235
7204 1.50" x 1.50" 7549 5/16"
1958-1986
E-Tec 200 302-327-350 S/B
- - - 7215 (C) port 1.26" x 2.24"
.120" thickness
- - - -
1958-1986 E-Tec 400 S/B - - - 7235 (C) port 1.08" x 2.11"
.120" thickness
7204 1.50" x 1.50" 7549 5/16"
1958 & Later
S/B Vortec Bowtie
- 7310 4.125" bore
0.039" compressed 8.70cc volume
7206 (E)
72078 (E)
port 1.14" x 2.20"
.060" thickness
Set of (10 pr.) #7206
7204 1.50" x 1.50" 7549 5/16"
1958 & Later
S/B Vortec Bowtie
- 7310 4.125" bore
0.039" compressed
8.70cc volume
7207 (E) port 1.14" x 2.20"
.120" thickness
Set of (10 pr.) #7207
7204 1.50" x 1.50" 7549 5/16"
1992-1997 LT1 7380 7342 4.100" bore
0.052" compressed 11.50cc volume
7243 port 2.1" x 1.265"
.060" thickness
7248 1.385" x 1.400"
(D shaped)
- -
1992-1997 LT4 7379 7342 4.100" bore
0.052" compressed 11.50cc volume
7244 port 2.3" x 1.25"
.060" thickness
7248 1.385" x 1.400"
(D shaped)
- -
1997 & Later LS1 - 7388 3.920" bore
0.051" compressed
7386 Set of 8 o-rings - - - -
1997 & Later LS2 - 7387 4.080" bore
0.051" compressed
7386 Set of 8 o-rings - - - -
1958-65
348/409 "W-Series"
7378 7359 4.312" bore
0.048" compressed
13.00cc volume
7240 (G)
7242 (I)
port 2.50" x 1.31"
.60" thickness
7241 (F) 1.813" x 1.75" 7582 5/16"
1965-90 Rectangular Port
Mark IV, 396-402-427-454 B/B
7362 7302 4.370" bore
0.038" compressed
10.05cc volume
7202 port 1.82" x 2.54"
.060" thickness
7205 1.940" (round) 7580 5/16"
1965-90 Rect. Port 6 Bolt Flange
with No Crossover
Mark IV, 396-402-427-454-555 B/B
- - - 7208 (C) port 1.82" x 2.46"
.060" thickness
- - - -
1965-90 Oval Port
Mark IV, 396-402-427-454 B/B
7363 7302 4.370" bore
0.038" compressed
10.05cc volume
7203 port 1.82" x 2.05"
.060" thickness
7205 1.940" (round) 7580 5/16"
1991 & later Rectangular Port
Gen V & VI, 454 B/B
7376 7375 4.370" bore
0.038" compressed
10.05cc volume
7202 port 1.82" x 2.54"
.060" thickness
7205 1.940" (round) 7580 5/16"
1991 & later Rectangular Port
Gen V & VI, 502 B/B
7389 7356 4.540" bore
0.039" compressed
10.05cc volume
7202 port 1.82" x 2.54"
.060" thickness
7205 1.940" (round) 7580 5/16"
Edelbrock Big Victor B/B
Spread Port Cylinder Heads
- - - 7245 port 1.23" x 2.13"
port 2.02" x 2.64"
.060" thickness
- - 7559 0.130"
 
CHRYSLER
1966-87
318-340-360
7370 7326 4.180" bore
0.050" compressed
11.20cc volume
7276 port 1.17" x 2.30"
.060" thickness
7236 1.75" x 1.25" 7592 3/16"
1992 & Later Magnum 7371 7327 4.140" bore
0.048" compressed
10.70cc volume
7277 port 1.18" x 2.18"
.060" thickness
7237 1.50" x 1.20" 7593 5/16"
1958-1979, 361-383-400,
413-426 [except HEMI],
and 440 engines
7366 (B) 7325 4.505" bore
0.038" compressed
9.69cc volume
7225 (B) port 1.23" x 2.27"
.030" thickness
7226 1.84" x 1.33" 7591 3/16"
426-572 (Gen 2) HEMI engines - 7247 4.590" bore
0.051" compressed
13.70cc volume
- - - - - -
 
FORD
1938-48 Ford/Mercury Flathead 7284 7393 3.187" bore 7234 port 1.35" x 2.00"
.062" thickness
- - - -
1949-53 Ford/Mercury Flathead 7283 7394 3.420" bore 7234 port 1.35" x 2.00"
.062" thickness
- - - -
1963-96, 289, 302 S/B [except Boss],
1982-96, 5.0L & 5.8L 351W
7364 7313 (J) 4.100" bore
0.045" compressed
9.8cc volume
7220
72208
port 1.20" x 2.00"
.060" thickness
Set of (10 pr.) #7220
7227 1.25" x 1.48" 7560 5/16"
Edelbrock Victor Jr. Cylinder
Heads without Heat Crossover
- - - 7219 port 1.28" x 2.10"
.060" thickness
- - - -
302 E-Boss and
351W E-Boss (Clevor) Conversions
7377 7341 (H) 4.100" bore
0.047" compressed
10.20cc volume
7265 port 1.52" x 2.16"
.060" thickness
7262 1.98" x 1.56" 7569 1/4"
1970-74 351 Cleveland 7374 7328 4.080" bore
0.038" compressed
8.10cc volume
7265 port 1.52" x 2.16"
.060" thickness
7262 1.98" x 1.56" 7569 1/4"
1958-76 390-428 FE 7368 7337 4.400" bore
0.038" compressed
9.90cc volume
7224 port 1.20" x 2.10"
.060" thickness
7229 1.40" x 2.04" 7568 5/16"
1968-1987
429/-460 B/B
7365 7314 4.500" bore
0.048" compressed
12.5cc volume
7223 (D) port 1.98" x 2.26"
.060" thickness
7228 1.50" x 2.10" 7563 5/16"
 
OLDSMOBILE
1965-76
400-425-455
7373 7340 4.250" bore
0.042" compressed
9.8cc volume
7284 port 1.44" x 2.44"
.060" thickness
7238 1.95" x 1.56" 7598 1/4"
 
PONTIAC
1961-1979
326-389-400-421-428-455
7382 7381 4.300" bore
0.038" compressed
8.96cc volume
7280 port 1.18" x 2.20"
.060" thickness
7281 1.880" 7590 3/16"

Edelbrock Tech Note TECH NOTE: Gasgacinch assures proper sealing of all gaskets used in a manifold installation. Also effective on water pump, oil pan and valve cover gaskets. Water and oil resistant. Allows easy gasket removal during parts disassembly. See Replacement Gaskets & Accessories for more information.

Please use the Legend bellow for the Gaskets Guide.

(B) Must be used with OE-style valley pan.
(C) Does not have embossed silicone bead.
(D) Does not fit CJ or SCJ.
(E) For use with Bowtie Vortec #2814 intake.
(F) For use with large port applications, including Edelbrock RPM heads #60809/#60819,will not fit factory heads.
(G) For use with large port applications only.
(H) For use with Edelbrock RPM heads #61699 only.
(I) For use with small port applications only.
(J) Graphite style.
(K) Gasket is trim-to-fit for port matching.