Edelbrock Installation Items (General Items)


NUTS, PLUGS, PIPE FITTINGS, ETC.
General Installation Items by Edelbrock
Application Emissions Part #
1-3/4" Knurled Nut - black anodized for Elite Series Round Air Cleaners - 4209
1-1/4" Knurled Nut - black anodized for Elite Oval & Triangular Air Cleaners - 4219
Carb Stud, Nut and Washer Kit - (5/16"-18 x 1-1/4") - 8006
Carb Stud, Nut and Washer Kit - (5/16" x 1-1/2") - 8008
Carb Stud, Nut and Washer Kit - (5/16"-18 x 1-3/4") - 8024
Brass Hose Fitting for SB Chrysler Intake Manifolds (1" I.D. x 3/4"-14" NPT) - 8078
#6 AN Fitting - for Edelbrock square-bore & Carter AFB carbs (5/8"-20) - 8087
Banjo Fitting - for Edelbrock square-bore & Carter AFB carbs (5/8"-20) - 8089
Inverted Flare Fuel Line Fitting - for Edelbrock square-bore & AFB carbs (3/8") - 8090
Socket Head Pipe Plug - 1/2" (1 only) - 9126
Socket Head Pipe Plugs - 3/8" (1 pair) - 9127
Socket Head Pipe Plugs - 1/4" (1 pair) - 9128
Socket Head Pipe Plugs - 1/8" (1 pair) - 9129
Oldsmobile Cast iron Exhaust Crossover Plugs - 2733
Vacuum Fitting (low profile) for Holley Double-Pumper when used with 3/8" male x 1/8" female NPT fitting with #2101, #5001, #7101 (.650") - 8096

THROTTLE BRACKETS AND HARDWARE
Throttle Brackets and Hardware by Edelbrock
Application Emissions Part #
Automatic Trans. Rod Extension Kit - for 1/4" Rod for Chrysler - 8003
Automatic Trans. Rod Extension Kit - for 5/16" Rod for Chrysler - 8004
Automatic Trans. Rod Extension Kit - for Ford - 8011
Automatic Trans. Kickdown Lever Kit - Chevy (early Holley Double-Pumper) - 8020
Automatic Trans. Kickdown Stud - 1968 & later TH350 - 8018
Trans. Kick-Down Linkage Adapter Kit - 1977 Chrysler Vans - 8022
Throttle & Automatic Trans. Shoulder Stud Kit - early Chrysler - 8007
Throttle Cable Adapter - Chevy (1977 & later) - 8009
Universal Throttle Rod Extension Kit - (7-1/2" long) - 8010
Throttle or Automatic Trans. Cable Extension Kit - Chevy - 8012
Throttle Bracket for #2156 & #5056 - Pontiac (1972-76, supplied w/manifolds) - 8014
Throttle Bracket - Pontiac (1968-71) - 8015
Ball End Stud - Holley Carbs - 8016
Throttle Bracket - for Performer 454 T.B.I. #3764 (1987-90) - 8019
Throttle Return Kit - Universal - 8005
GM Transmission Cable Adapter- (For use with 2004R, 700R4, 4L60 transmissions) - 8026
AMC Throttle Cable Adapter - 1979 and later - 8034
Throttle & Automatic Trans. Kickdown Lever Kit - for Chrysler (early Holley Double-Pumper) - 8021
LS1 Throttle and Trans Bracket (for carbureted applications) - 8029
Throttle, Cruise Control & Trans. Kick-Down Mounting Bracket For Small-block Chevy (1978 & earlier with TH350, 200R4, or 700R4 trans.) with Chrome Plated Finish - 8030
Throttle, Cruise Control & Trans. Kick-Down Mounting Bracket For Small-block Chevy (1978 & earlier with TH350, 200R4, or 700R4 trans.) with Cadium Plated Gold Finish - 8036
Throttle Solenoid and Bracket - for all Edelbrock Square-Bore carbs - 8059
Throttle Rod Shoulder Stud - Chevy - 9141
Universal Throttle Bracket for Small-block and Big-block Chevys - 8031
Universal Throttle Bracket for Small-block Chevy Vortec
Black powder coated and adjustable to fit both EFI and standard intake manifolds. Designed for maximum adjustability on any S/B Chevy Vortec style manifold.
- 8032

REPLACEMENT CHOKE PLATES FOR EDELBROCK MANIFOLDS
Replacement Choke Parts by Edelbrock
Application Emissions Part #
Choke Block-Off Plate for #3771 - Ford 351-M/400 (supplied with manifold) - 8971
Choke Block-Off Plate - Ford 351-W & 351-C (supplied with manifolds) - 8981
Choke Adapter for #2101, #2104 & #3701 - Small-block Chevy (supplied with manifolds) - 8901
Choke Adapter for #3711 & #2151 - Oldsmobile (supplied with manifolds) - 8961
Choke Adapter for #2161 - Big-block Chevy (supplied with manifold) - 8951

DIVORCED CHOKE RODS FOR GM CARBS
Divorced Choke Rods for GM Carbs by Edelbrock
Application Emissions Part #
Automatic Divorced Choke Rod for #2101, #2104 & #3701 with Q-Jet carburetor - 9171
Automatic Divorced Choke Rod for #7104 with Q-Jet carburetor - 9172
Automatic Divorced Choke Rod for #7164 with Q-Jet carburetor - 9178
Automatic Divorced Choke Rod for #2161 & #3761 with Q-Jet carburetor - 9179

INTAKE MANIFOLD BOLT KITS
Designed specifically for Edelbrock manifolds, these bolt kits feature reduced hex heads for easy wrench access. Features include cadmium finished steel bolt and hardened washers.
Intake Manifold Bolt Kits by Edelbrock
Application Emissions Part #
AMC 290-401 c.i.d. - 8534
Chevy 262-400 c.i.d. (1986 & earlier only) - 8504
Chevy 262-400 c.i.d. with Edelbrock E-Tec or Chevrolet Vortec heads - 8516
Chevy 348-409 c.i.d. - 8509
Chevy 396-502 c.i.d. - 8564
Chrysler 318-360 c.i.d. - 8579
Chrysler 383-400-440 c.i.d. - 8594
Chrysler 5.7 & 6.1L Late Model HEMI Engines - 8528
Ford 260-302 c.i.d. - 8524
Ford, Perf. RPM E-Boss 302 and E-Boss 351 - 8529
Ford 351W c.i.d. - 8584
Ford 351M/400 c.i.d. - 8574
Ford 351C c.i.d. (#7564 only) - 8565
Ford 360-390 c.i.d. (#2105 only) - 8508
Ford FE (#7105 only) - 8507
Ford FE (#2936 and #2937 only) - 8536
Ford 429-460 c.i.d. - 8569
Oldsmobile 330-403 c.i.d. (#2711 and #3711 only) - 8514
Pontiac 326-455 c.i.d. - 8559

WATER BYPASS KIT
Provides (2) bypass hoses, fittings and water neck adapter to plumb from the cylinder heads to the water neck. This is common on circle track 23° high-port, 18°, and 15° heads. NOTE: Not for plumbing front to rear on intake manifolds.
Water Bypass Kit by Edelbrock
Application Emissions Part #
Water Bypass Kit - 8095

A/B EPOXY
Easy to use A/B epoxy is a two part epoxy that is great for cylinder head and intake modifications. Simply mix the two parts, apply and let cure. Once cured, it can be sanded to shaoem drilled and tapped. Wash hands well after handling.
A/B Epoxy by Edelbrock
Application Emissions Part #
1 Pound Tube of A/B Epoxy - 9290

HIGH TEMP SILICONE SEALANT
This high quality RTV silicone is for use with intake manifold installations. This oil resistant sealant is fastcuring, sensor-safe, low-odor, non-corrosive and meets performance specs of OE silicone gaskets. It also retains high flexibility to prevent leaks and seepage caused by vibration and thermal expansion.
High Temp Silicon Sealant by Edelbrock
Application Emissions Part #
RTV Silicone Sealant (1/2 oz.) - 1077
RTV Silicone Sealant (3 oz.) - 1076

Edelbrock Tech Note PRODUCT EMISSIONS GUIDE
The following guide is designed to help you determine which Edelbrock components are legal for use on your vehicle. Learn more about Edelbrock Product Emissions Guide.

    50-State Legal
    For Racing Use ONLY
    For Use on Pre-Pollution Controlled Vehicles (PPCV)
    Stock Replacement Part
    Engine Swaps