Edelbrock Performer Series Manifolds For AMC / Jeep


AMC/JEEP 290-401 V8
PERFORMER AMC (IDLE-5500 RPM)
Designed for 1970-91 street 304-360-401 c.i.d. V8 engines. Available with or without EGR. Will not accept stock Motorcraft spread-bore carburetor. #2131 is a stock replacement/street legal part on 360-401 V8's with OEM carb (1970-72). EGR equipped, use #3731.
AMC / Jeep Performer Series Intake Manifolds by Edelbrock
Application Dyno Emissions Part #
Performer AMC (non-EGR) 2131
Performer AMC (EGR) - 3731
Edelbrock Carburetor Recommendation CARB RECOMMENDATIONS: OEM 4-bbl. non-EGR squarebore carb Edelbrock Thunder Series AVS or Performer Series (500-650 cfm) Carburetor. Requires #8008 or #8024 stud, nut & washer kit.
Edelbrock Installation Note INSTALLATION NOTE: Recommended intake gasket: Edelbrock #7213 or Fel-Pro MS96011. #2131/#3731 must use factory style metal valley tray. Manifolds have two center bolt holes offset. Manifold height: A-4.20", B-5.50"; Carb pad height: 4.85". Port exit dimensions: 1.03" x 2.07". Bracket #8034 required for 1979 and later vehicles. For the heights of all Edelbrock manifolds, please visit the the Manifold Reference Dimensions page.
Edelbrock Camshaft Recommendation CAMSHAFT RECOMMENDATIONS:Performer Plus #2132. See Camshaft section for cam card specifications.

Edelbrock Tech Note PRODUCT EMISSIONS GUIDE
The following guide is designed to help you determine which Edelbrock components are legal for use on your vehicle. Learn more about Edelbrock Product Emissions Guide.

    50-State Legal
    For Racing Use ONLY
    For Use on Pre-Pollution Controlled Vehicles (PPCV)
    Stock Replacement Part
    Engine Swaps