Edelbrock Torker Series Manifolds For AMC / Jeep


AMC/JEEP 290-401 V8
TORKER AMC (3500-7500 RPM)
Designed for street and race 360-390-401 c.i.d. V8 engines. Manifold not equipped with EGR. Manifold will not accept stock Motorcraft spread-bore carburetor. Not recommended for 290 or 304 V8's. Includes standard oil fill and PCV provisions.
AMC / Jeep Torker Series Intake Manifolds by Edelbrock
Application Dyno Emissions Part #
Torker AMC 1970-91 (non-EGR) - 2930
Edelbrock Carburetor Recommendation CARB RECOMMENDATIONS: Edelbrock Thunder Series AVS or Performer Series (750-800 cfm) Carburetor.
Edelbrock Installation Note INSTALLATION NOTE: Recommended intake gasket: #7213 and Fel-Pro MS96011. #2930 must use factory style metal valley tray. #2930 has two center bolt holes offset. Manifold height: A-4.45", B-5.38"; Carb pad height: 4.91". Port exit dimensions: 2.15" x 1.04". Bracket #8034 required for 1979 and later vehicles. For the heights of all Edelbrock manifolds, please visit the the Manifold Reference Dimensions page.

Edelbrock Tech Note PRODUCT EMISSIONS GUIDE
The following guide is designed to help you determine which Edelbrock components are legal for use on your vehicle. Learn more about Edelbrock Product Emissions Guide.

    50-State Legal
    For Racing Use ONLY
    For Use on Pre-Pollution Controlled Vehicles (PPCV)
    Stock Replacement Part
    Engine Swaps