Edelbrock Manifolds For Buick


BUICK/ROVER 215 V8
PERFORMER ROVER (IDLE-5500 RPM)
Designed for Rover 3500cc V8's (1968 & later) and 1961-63 Buick and Oldsmobile aluminum 215 V8's. Manifold not equipped with EGR. Will not work with OEM carburetors (except Carter AVS).
Performer Buick 215 (non-EGR) Intake Manifolds by Edelbrock
Application Dyno Emissions Satin Polished
Performer Rover (non-EGR) - 2198 21981
Edelbrock Carburetor Recommendation CARB RECOMMENDATIONS: Edelbrock Thunder Series AVS or Performer Series (500 cfm) Carburetor.
Edelbrock Installation Note INSTALLATION NOTE: Recommended intake gasket: Fel-Pro #MS96002. Manifold height: A-5.00", B-5.92" measured to engine block; Carb pad height: 5.46". Port exit dimensions: .88" x 1.54". Throttle Bracket #8036 will fit and accepts GM style throttle, kickdown and cruise control cables. For the heights of all Edelbrock manifolds, please visit the the Manifold Reference Dimensions page.

BUICK 400-455 V8
PERFORMER BUICK 455 (IDLE-5500 RPM)
Designed for street 400-430-455 c.i.d. Buick V8's. #2146 is a stock replacement/street legal part for 400, 430 and 455 V8's; 1967-71; except stock equipped EGR. Manifold not equipped with EGR. Will fit cold air induction hoods. Will not fit Buick 350.
Performer Buick 455 (non-EGR) Intake Manifolds by Edelbrock
Application Dyno Emissions Part #
Performer Buick 455 (non-EGR) - 2146
Edelbrock Carburetor Recommendation CARB RECOMMENDATIONS: OEM 4-bbl. Edelbrock Thunder Series AVS or Performer Series (650-800 cfm) Carburetor.
Edelbrock Installation Note INSTALLATION NOTE: Recommended intake gaskets: for 1967-71, Fel-Pro #MS96005; 1972-76, Fel-Pro #MS96014. #2146 accepts divorced choke-type Quadrajet only. Manifold height: A-3.80", B-4.75"; Carb pad height: 4.27". Port exit dimensions: 1.14" x 2.26". For the heights of all Edelbrock manifolds, please visit the the Manifold Reference Dimensions page.

BUICK 400-455 V8
BUICK B-4B (IDLE-5500 RPM)
Back by popular demand, #2515 is a resurrection of the popular B-4B manifold made in the late 1960s for street 400-430-455 c.i.d. Buick V8's. The only change to the original design is the addition of our proven Performer-style carb pad that accepts either square-bore or spread-bore carbs, making this manifold an excellent choice for both restoration and performance-minded Buick fans.
Performer Buick B-4B (non-EGR) Intake Manifolds by Edelbrock
Application Dyno Emissions Part #
Buick B-4B (non-EGR) - 2515
Edelbrock Carburetor Recommendation CARB RECOMMENDATIONS: OEM 4-bbl. Edelbrock Thunder Series AVS or Performer Series (650-800 cfm) Carburetor.
Edelbrock Installation Note INSTALLATION NOTE: Recommended intake gaskets: for 1967-76, Edelbrock #7246 or Fel-Pro #MS96005; 1972-76, Fel-Pro #MS96014. Manifold height: A-3.80", B-4.75"; Carb pad height: 4.27". Port exit dimensions: 1.14" x 2.26".. For the heights of all Edelbrock manifolds, please visit the the Manifold Reference Dimensions page.

Edelbrock Tech Note PRODUCT EMISSIONS GUIDE
The following guide is designed to help you determine which Edelbrock components are legal for use on your vehicle. Learn more about Edelbrock Product Emissions Guide.

    50-State Legal
    For Racing Use ONLY
    For Use on Pre-Pollution Controlled Vehicles (PPCV)
    Stock Replacement Part
    Engine Swaps