Edelbrock Performer RPM Series Manifolds For S/B Chevy


CHEVROLET 262-400 SMALL-BLOCK V8
PERFORMER RPM (1500-6500 RPM)
Designed for 1955-86 262-400 c.i.d. Chevy V8's for maximum power and a broad torque curve for high- performance street/marine engines. Provides power like a single-plane and throttle response like a dual-plane. Has provisions to machine for an oil fill tube. No provisions for exhaust heated or stock-style choke. Accepts late-model water neck, air-conditioning, alternator and H.E.I. Will fit cast iron Chevrolet Bowtie heads, but will not fit 1987 and later cast iron heads. Will not fit under stock Corvette hood. Available with satin, polished, black or EnduraShine finish.
Chevy 262-400 Performer RPM Series Intake Manifolds by Edelbrock
Application Dyno Emissions Satin Polished Black EnduraShine
Performer RPM (non-EGR) 7101 71011 71013 71014
Edelbrock Carburetor Recommendation CARB RECOMMENDATIONS: Edelbrock Thunder Series AVS or Performer Series (650-800 cfm) Carburetor. Use bracket #8031 or #8036 for 1972-78.
Edelbrock Installation Note INSTALLATION NOTE: Use #8504 Edelbrock bolt kit. Recommended intake gasket: Edelbrock #7201. Manifold height: A-4.20", B-5.25" (.70" taller than #2101); Carb pad height: 4.72". Port exit dimensions: 1.16" x 1.92". For the heights of all Edelbrock manifolds, please visit the the Manifold Reference Dimensions page.
Edelbrock Camshaft Recommendation CAMSHAFT RECOMMENDATIONS: Performer RPM #7102, #2201 and #2204. See Camshaft section for cam card specifications.

CHEVROLET 262-400 SMALL-BLOCK V8
PERFORMER RPM Q-JET (1500-6500 RPM)
Designed for 1955-86 262-400 c.i.d. Chevy V8's for spread-bore (Q-Jet) or square-bore carbs. Delivers maximum power and a broad torque curve for high-performance street. Carb pad will accept square-bore carbs without adapters. #2504 Marine intake features brass lined front water crossover and brass flange inserts to cover the rear water openings. Performer RPM Q-Jet has same provisions as #7101.Will not fit under stock Corvette hood.
Chevy 262-400 Q-Jet Performer RPM Series Intake Manifolds by Edelbrock
Application Dyno Emissions Part #
Performer RPM Q-Jet (non-EGR) - 7104
Performer RPM Q-Jet Marine Application (non-EGR) - 2504
Performer RPM Q-Jet Marine Application 1987-95 (non-EGR) - 2506
Edelbrock Carburetor Recommendation CARB RECOMMENDATIONS: Edelbrock Thunder Series AVS or Performer Series (650-800 cfm) Carburetor. Use bracket #8031 or #8036 for 1972-78. #2504 and #2506 use #1409/#1410.
Edelbrock Installation Note INSTALLATION NOTE: Recommended intake gasket: Edelbrock #7201. Manifold height: A-4.20", B-5.25"; Carb pad height: 4.72". Port exit dimensions: 1.16" x 1.92". Use rod #9172 for divorced choke with Q-Jet. For the heights of all Edelbrock manifolds, please visit the the Manifold Reference Dimensions page.
Edelbrock Camshaft Recommendation CAMSHAFT RECOMMENDATIONS: Performer RPM #7102, #2201 and #2204. See Camshaft section for cam card specifications.

CHEVROLET 262-400 SMALL-BLOCK V8
PERFORMER RPM VORTEC (1500-6500 RPM)
Based on the powerful Edelbrock #7101, this single four-barrel intake is designed for the street rod, marine and engine swap market utilizing 262-400 c.i.d. Chevy V8's with 1996 and later Vortec (L31) cast iron or Edelbrock E-Tec aluminum heads. #2516 Marine intake features brass lined front water crossover and brass flange inserts to cover the rear water openings. An external water bypass boss is machined into the front of the water crossover for use on 1996 and later Vortec production engines. Manifold accepts square-bore carbs only. For street and marine engines operating from idle-5500 rpm, see the Performer Vortec manifold or Performer Vortec EPS. Will not fit under stock Corvette hood. Available with satin, black or EnduraShine finish.
Chevy 262-400 Performer RPM Vortec Series Intake Manifolds by Edelbrock
Application Dyno Emissions Satin Black EnduraShine
Performer RPM Vortec (non-EGR) - 7116 71163 71164
Performer RPM Vortec Marine Application (non-EGR) - 2516 - -
Edelbrock Carburetor Recommendation CARB RECOMMENDATIONS: Edelbrock Thunder Series AVS or Performer Series (650-800 cfm) Carburetor. Use bracket #8032 for 1972-78.
Edelbrock Installation Note INSTALLATION NOTE: ecommended intake gasket: Edelbrock #7235 or GM #89017465. Manifold height: A-4.20", B-5.25"; Carb pad height: 4.72". Port exit is 2.05" tall with slanted side walls. Stock brackets will require modification to fit the upright manifold bolt holes. Use Edelbrock Vortec throttle bracket #8032. For the heights of all Edelbrock manifolds, please visit the the Manifold Reference Dimensions page.
Edelbrock Camshaft Recommendation CAMSHAFT RECOMMENDATIONS: Performer RPM #7102, #2201 and #2204. See Camshaft section for cam card specifications.

Edelbrock Tech Note PRODUCT EMISSIONS GUIDE
The following guide is designed to help you determine which Edelbrock components are legal for use on your vehicle. Learn more about Edelbrock Product Emissions Guide.

    50-State Legal
    For Racing Use ONLY
    For Use on Pre-Pollution Controlled Vehicles (PPCV)
    Stock Replacement Part
    Engine Swaps