Edelbrock Performer Series Manifolds For S/B Chevy


CHEVROLET 262-400 SMALL-BLOCK V8
PERFORMER EPS (IDLE-5500 RPM)
Designed for 1986 and earlier 262-400 cubic-inch Chevys, the Performer EPS dual-plane manifold is optimized to deliver superior performance with Edelbrock square-bore Performer Series or Thunder Series AVS carburetors. This small-block Chevy manifold has a runner design that's "tuned" for peak torque at 3500 rpm on a 350-inch engine and it's ideal for power from off-idle to 5500 rpm. Dyno tests showed gains of 5 hp and 9 ft-lbs. of torque over the Edelbrock Performer manifold #2101 on a 350 Chevy. From 3000 to 4500 rpm, the increases averaged 5+ ft-lbs. of torque for more performance where you need it most. Performer EPS manifold #2703 combines a modern runner design with a front mounted oil fill tube for those who want the vintage look of our Classic valve covers with no breathers. #2703 has the same performance features as the Performer EPS #2701. Includes Oil Fill Tube (not installed) and matching push-in breather cap. The Oil Fill Tube and Breather are also available separately as #4803. Match with a dependable Edelbrock square-bore carburetor for maximum performance gains. Also available with choice of four finishes. Will not fit under stock Corvette hood. Available with satin, polished, black or EnduraShine™ finish.
Chevy Performer EPS (non-EGR) Intake Manifolds by Edelbrock
Application Dyno Emissions Satin Polished Black EnduraShine
Performer EPS (non-EGR) 2701 27011 27013 27014
Performer EPS W/ Oil Fill Tube (non-EGR) - 2703 - 27033 27034
Edelbrock Carburetor Recommendation CARB RECOMMENDATIONS: Edelbrock Thunder Series AVS or Performer Series (500-650 cfm) Carburetor.
Edelbrock Installation Note INSTALLATION NOTE: Recommended intake gasket: Edelbrock #7201. Manifold ht: A-3.74", B-4.80"; Carb pad height: 4.27". Port exit dimensions: 1.15" x 1.87". For the heights of all Edelbrock manifolds, please visit the the Manifold Reference Dimensions page.
Edelbrock Camshaft Recommendation CAMSHAFT RECOMMENDATIONS: #2102, #2103, #2208, #2209. See Camshaft section for cam card specifications.

CHEVROLET 262-400 SMALL-BLOCK V8
PERFORMER EPS VORTEC (IDLE-5500 RPM)
Now available for small-block Chevys with Vortec or Edelbrock E-Tec cylinder heads, the Performer EPS dualplane manifold is optimized to deliver superior performance with Edelbrock square-bore Performer Series or Thunder Series AVS carburetors. The runner design is "tuned" for peak torque around 3500 rpm on a 350-inch engine and it's ideal for power from off-idle to 5500 rpm. Dyno tests showed gains averaging 5+ ft-lbs. of torque from 3000 to 4500 rpm for more performance where you need it most. Match with a dependable Edelbrock square-bore carburetor for maximum performance gains. Will not fit under stock Corvette hood. Available with satin, polished, black powder coated or EnduraShine finish.
Chevy Performer EPS Vortec (non-EGR) Intake Manifolds by Edelbrock
Application Dyno Emissions Satin Black EnduraShine
Performer EPS Vortec (non-EGR) 2716 27163 27164
Edelbrock Carburetor Recommendation CARB RECOMMENDATIONS: OEM 4-bbl. (pre-1981, electric choke only) - Use our #8032 throttle bracket. Edelbrock Thunder Series AVS or Performer Series (500-650 cfm) Carburetor.
Edelbrock Installation Note INSTALLATION NOTE: Recommended intake gasket: Edelbrock #7235. Manifold height: A-3.87", B-5.28"; Carb pad height: 4.57". Port exit is 2.05" tall with slanted side walls. Stock brackets will require modification to fit the upright manifold bolt holes. For the heights of all Edelbrock manifolds, please visit the the Manifold Reference Dimensions page.
Edelbrock Camshaft Recommendation CAMSHAFT RECOMMENDATIONS: #2102, #2103, #2208, #2209. See Camshaft section for cam card specifications.

CHEVROLET 262-400 SMALL-BLOCK V8
PERFORMER - '86 & EARLIER (IDLE-5500 RPM)
Designed for street 1955-86 262-400 c.i.d. small-block Chevys. #2101 is stock replacement/street legal part for 302, 327 and 350 V8's with OEM 4-bbl. or Edelbrock #1400 carb; 1966-72 (1973 non-California) cars, 1966-83 trucks and Suburbans; except stock equipped EGR. #3701 is stock replacement/street legal part for 305, 350 and 400 V8's with OEM 4-bbl. or Edelbrock #1400 carb.; 1972- 86 and GM corporate engines with 350 V8's; 1981-86. Performers accept late-model choke, water neck, air-conditioning, alternator and H.E.I. Has provisions to add oil fill tube. Not for 1987 and later cast iron or Chevy Bowtie heads. Will fit 1987 and later stock aluminum heads. Available with satin or polished finish
Chevy Performer '86 & Earlier Intake Manifolds by Edelbrock
Application Dyno Emissions Satin Polished
Performer (non-EGR) 2101 21011
Performer (EGR) - 3701 -
Edelbrock Carburetor Recommendation CARB RECOMMENDATIONS: OEM 4-bbl., use choke rod #9171, bracket #8031 or #8036 for 1972-78 Edelbrock Thunder Series AVS or Performer Series (500-650 cfm) Carburetor. Use bracket #8031 or #8036 for 1972-78.
Edelbrock Installation Note INSTALLATION NOTE: se adapter #8035 for clamp-on EGR valve. With carb #1400 & #3701, EGR spacer #1476 is required. #1476 is required with #3701 on centerbolt heads with 1986 & earlier bolt pattern. Choke plate #8901 included Recommended intake gasket: Edelbrock #7201. Manifold height: A-3.50", B-4.60"; Carb pad height: 4.05". Port exit dimensions: 1.14" x 1.88". For the heights of all Edelbrock manifolds, please visit the the Manifold Reference Dimensions page.
Edelbrock Camshaft Recommendation CAMSHAFT RECOMMENDATIONS: #2102, #2103, #2208, #2209. See Camshaft section for cam card specifications.

CHEVROLET 262-400 SMALL-BLOCK V8
PERFORMER VORTEC (IDLE-5500 RPM)
Based on the popular and powerful Edelbrock #2101, this dual-plane intake is designed for the street rod, industrial and engine swap market utilizing 262-400 c.i.d. Chevy V8's with 1996 and later Vortec (L31) cast iron or the Edelbrock E-Tec aluminum heads. Manifold has provisions for external water bypass and may be used on either Vortec blocks or 1995 and earlier blocks. No provision for exhaust heated chokes. Accepts both square-bore and spread-bore carbs and late model water neck, alternator, HEI and air conditioning brackets. Will not fit under stock Corvette hood. Available with standard, black or EnduraShine finish for a look you've got to see to believe. For high performance engines operating from 1500-6500 rpm, see the Performer RPM Vortec manifold.
Chevy Performer Vortec (non-EGR) Intake Manifolds by Edelbrock
Application Dyno Emissions Satin Polished Black EnduraShine
Performer Vortec (non-EGR) - 2116 21161 21163 21164
Edelbrock Carburetor Recommendation CARB RECOMMENDATIONS: OEM 4-bbl. (pre-1981, electric choke only) - Use our #8032 throttle bracket. Edelbrock Thunder Series AVS or Performer Series (500-650 cfm) Carburetor. Use bracket #8032 for 1972-78.
Edelbrock Installation Note INSTALLATION NOTE: Recommended intake gasket: Edelbrock #7235. Manifold height: A-3.87", B-5.28"; Carb pad height: 4.57". Port exit is 2.05" tall with slanted side walls. Stock brackets will require modification to fit the upright manifold bolt holes. For the heights of all Edelbrock manifolds, please visit the the Manifold Reference Dimensions page.
Edelbrock Camshaft Recommendation CAMSHAFT RECOMMENDATIONS: #2102, #2103, #2208, #2209. See Camshaft section for cam card specifications.

CHEVROLET 262-400 SMALL-BLOCK V8
PERFORMER - FOR 1987-95 CAST IRON CYLINDER HEADS (IDLE-5500 RPM)
Designed for street 262-400 c.i.d. Chevy V8's that have heads with canted center bolt holes. #2104 is stock replacement/street legal part for 302, 327, 350 V8's with OEM 4-bbl. carb.; except stock equipped EGR. #3706 is stock replacement/street legal part for 305, 350 V8's with OEM 4-bbl. carb.; 1987. Both accept late-model water neck, air-conditioning, alternator, H.E.I. and have rear water crossovers. #2104 accepts exhaust- heated chokes. For 1987-95 stock aluminum heads use #2101. Will not fit Chevrolet Bowtie or LT1 heads. Available with satin or black finish.
Chevy Performer (non-EGR) Intake Manifolds by Edelbrock
Application Dyno Emissions Satin Black
Performer (non-EGR) - 2104 21043
Performer (EGR) - 3706 -
Edelbrock Carburetor Recommendation CARB RECOMMENDATIONS: #2104: OEM 4-bbl. (pre-1981 only), use choke rod #9171, bracket #8031 or #8036 for 1972-78 Edelbrock Thunder Series AVS or Performer Series (500-650 cfm) Carburetor. Use bracket #8031 or #8036 for 1972- 78. #3706: OEM 4-bbl. Edelbrock Performer Series #1400, (600 cfm) Carburetor.
Edelbrock Installation Note INSTALLATION NOTE: se adapter #8035 for clamp-on EGR valve. With carb #1400 & #3706, EGR spacer #1476 is required. Choke plate #8901 included with #2104. #3706 has no provision for exhaust heated chokes. Recommended intake gasket: GM #10163409. Manifold height: A-3.50", B-4.60"; Carb pad height: 4.05". Port exit dimensions: 1.14" x 1.88". For the heights of all Edelbrock manifolds, please visit the the Manifold Reference Dimensions page.
Edelbrock Camshaft Recommendation CAMSHAFT RECOMMENDATIONS: #2102, #2103, #2208, #2209. See Camshaft section for cam card specifications.

Edelbrock Tech Note PRODUCT EMISSIONS GUIDE
The following guide is designed to help you determine which Edelbrock components are legal for use on your vehicle. Learn more about Edelbrock Product Emissions Guide.

    50-State Legal
    For Racing Use ONLY
    For Use on Pre-Pollution Controlled Vehicles (PPCV)
    Stock Replacement Part
    Engine Swaps