Edelbrock Performer Series Manifolds For Chevy 6-Cylinder


CHEVROLET 90° V6
PERFORMER 4.3L T.B.I. V6 (IDLE-5500 RPM)
Designed for street 1987-94 Chevrolet 4.3L V6 with factory Throttle Body Injection. The Performer 4.3L intake manifold provides outstanding throttle response and torque increases from idle to 5500 rpm. #3713 is a stock replacement/street legal part for 4.3L T.B.I. V6; 1987-94. A computer chip is available at no charge and is street legal for 4.3L trucks (E.O. #D-215-21). Return the postage paid card that comes with the manifold to receive the chip. Manifold and chip provides a 6/10s of a second gain from 10-70 mph. Accepts all factory accessories/hardware. Throttle body unit remains in stock location. Not for vehicles with flash memory computer. Most 1994 and later engines came equipped with flash memory computer. Flash memory ECM is located underhood. Will not fit 1986-89 Astro/Safari Vans. Will fit 1990-95 Astro/Safari Vans.
Chevy V6 4.3L TBI Performer Series Intake Manifolds by Edelbrock
Application Dyno Emissions Part #
Performer 4.3L T.B.I. V6 (EGR) 3713
Edelbrock Installation Note INSTALLATION NOTE: Use stock Throttle Body Injection unit. Recommended intake gasket: GM #10163423. Manifold height: A-3.93", B-5.15"; Carb pad height: 4.54". Port exit dimensions: 1.10" x 1.92". For the heights of all Edelbrock manifolds, please visit the the Manifold Reference Dimensions page.
Edelbrock Camshaft Recommendation CAMSHAFT RECOMMENDATIONS: Performer Plus #3714. See Camshaft section for cam card specifications.

CHEVROLET 90° V6
PERFORMER 90° V6 (IDLE-5500 RPM)
Designed for street and marine 1985-95 200-229-262 c.i.d. (3.8 and 4.3L) Chevy V6s. Will not accept stock automotive carbs or 262 T.B.I. unit. Dual bolt pattern water neck fits both automotive and marine applications. Produced 18 more horsepower than an older manifold design on 4.3L marine engine.
Chevy 90° V6 Performer Series Intake Manifolds by Edelbrock
Application Dyno Emissions Part #
Performer 90° V6 (non-EGR) 2111
Edelbrock Carburetor Recommendation CARB RECOMMENDATIONS: Edelbrock Thunder Series AVS or Performer Series (500 cfm) Carburetor.
Edelbrock Installation Note INSTALLATION NOTE: Recommended intake gasket: Edelbrock #7209 or Fel-Pro #1202. Manifold height: A-3.50", B-4.18"; Carb pad height: 3.84". Port exit dimensions: 1.15" x 1.87". For the heights of all Edelbrock manifolds, please visit the the Manifold Reference Dimensions page.

CHEVROLET 90° V6
PERFORMER VORTEC V6 (IDLE-5500 RPM)
Based on the powerful Edelbrock #2111, this dual-plane intake is designed for the engine swap market utilizing 1985 and later Chevy 200-229-262 c.i.d. (3.8L and 4.3L) V6 engines with Vortec heads. With this manifold, rodders can take advantage of the higher flow available with the Vortec head design. Performer Vortec V6 #2114 has provisions for external water bypass and may be used on either Vortec blocks or 1995 and earlier blocks. Designed for use with Edelbrock Thunder Series AVS or Performer Series 500 cfm carbs, it accepts late model water neck, alternator, HEI and air conditioning.
Chevy Vortec V6 Performer Series Intake Manifolds by Edelbrock
Application Dyno Emissions Part #
Performer Vortec V6 (non-EGR) - 2114
Edelbrock Carburetor Recommendation CARB RECOMMENDATIONS: Edelbrock Thunder Series AVS or Performer Series (500 cfm) Carburetor.
Edelbrock Installation Note INSTALLATION NOTE: Recommended intake gasket: GM 89017866. Manifold height: A-3.50", B-4.18"; Carb pad height: 3.84". Port exit dimensions: port exit is 2.05" tall with slanted side walls. For the heights of all Edelbrock manifolds, please visit the the Manifold Reference Dimensions page.
Edelbrock Camshaft Recommendation CAMSHAFT RECOMMENDATIONS: Performer Plus #2112. See Camshaft section for cam card specifications.

CHEVROLET 2.8L V6
PERFORMER 2V 60° V6 (IDLE-5500 RPM)
Designed for 1982-85 2.8L 60° V6 Chevy longitudinal-mount engines. #3785/#3787 are stock replacement street legal parts for these engines with OEM 2-bbl. carb; 1982-85. For light duty GM pick-ups & passenger cars and 1982-86 Jeep Cherokees with 2.8L. Features base and interchangeable tops. #3787 accepts stock 2-bbl. carb. Edelbrock Signature Series chrome valve covers #4488 are available for this engine.
Chevy 2V 60° V6 Performer Series Intake Manifolds by Edelbrock
Application Dyno Emissions Part #
Performer 2V 60° V6 Base - 3785
Performer 2V 60° V6 Top (EGR) - 3787
Top Gasket (included with top) - - 6941
Edelbrock Carburetor Recommendation CARB RECOMMENDATIONS: OEM 2-bbl.
Edelbrock Installation Note INSTALLATION NOTE: Recommended intake gasket: Fel-Pro #MS91022. Manifold height: A-4.37", B-5.45"; Carb pad height: 4.91". Port exit dimensions: 1.00" x 1.28"/1.00" x 1.71". Linkage and bracketry come with top. Note: When used on Jeep Cherokee, additional hood shimming is required for clearance. Hood shims available from Jeep dealers (part #J0680435). For the heights of all Edelbrock manifolds, please visit the the Manifold Reference Dimensions page.
Edelbrock Camshaft Recommendation CAMSHAFT RECOMMENDATIONS: Performer Plus #3790. See Camshaft section for cam card specifications.

CHEVROLET 2.8L V6
PERFORMER 4V 60° V6 (IDLE-6000 RPM)
Designed for 1982-85 2.8L 60° V6 Chevy longitudinal-mount engines used in light duty pick-ups and cars. Design features one manifold base and two interchangeable tops. The Performer 4V 60° V6 #3789 accepts std. flange 4-bbl. carbs. Edelbrock chrome valve covers #4488 are available for this engine.
Chevy 4V 60° V6 Performer Series Intake Manifolds by Edelbrock
Application Dyno Emissions Part #
Performer 4V 60° V6 Base - 3785
Performer 4V 60° V6 Top (EGR) 3789
Top Gasket (included with top) - - 6942
Edelbrock Carburetor Recommendation CARB RECOMMENDATIONS: Holley #0-8007 (390 cfm).
Edelbrock Installation Note INSTALLATION NOTE: Manifold height: A-4.90", B-5.95" ; Carb pad height: 5.42". Port exit dimensions: 1.00" x 1.28"/1.00" x 1.71". Recommended intake gasket: Fel-Pro #1270 or #MS91022. Linkage and bracketry come with top. With 4-bbl. carb #0-8007 and auto trans, a GM transmission cable #25515638 is required. For the heights of all Edelbrock manifolds, please visit the the Manifold Reference Dimensions page.
Edelbrock Camshaft Recommendation CAMSHAFT RECOMMENDATIONS: Performer Plus #3790. See Camshaft section for cam card specifications.

Edelbrock Tech Note PRODUCT EMISSIONS GUIDE
The following guide is designed to help you determine which Edelbrock components are legal for use on your vehicle. Learn more about Edelbrock Product Emissions Guide.

    50-State Legal
    For Racing Use ONLY
    For Use on Pre-Pollution Controlled Vehicles (PPCV)
    Stock Replacement Part
    Engine Swaps