Edelbrock Performer Series Manifolds For B/B Chrysler


CHRYSLER 361-400 V8
PERFORMER 383 (IDLE-5500 RPM)
Designed for street 361-383-400 c.i.d. Chrysler V8's that measure 7.75" across block. For EGR, #2186 is stock replacement/street legal part for 400 V8's with OEM 4-bbl. carb.; 1972-78. For non-EGR, #2186 is stock replacement/street legal part for 361-383-400 V8's with OEM 4-bbl. carb.; 1966-72 (1973 non-CA); except stock equipped EGR. May be used with OEM or aftermarket carbs.
B/B Chrysler Performer Series Intake Manifolds by Edelbrock
Application Dyno Emissions Part #
Performer 383 (EGR/non-EGR) 2186
Edelbrock Carburetor Recommendation CARB RECOMMENDATIONS: OEM 4-bbl Edelbrock Thunder Series AVS or Performer Series (600-800 cfm) Carburetor, use our #1481 or #1843 Throttle/Transmission Lever Kit.
Edelbrock Installation Note INSTALLATION NOTE: Recommended intake gasket: Edelbrock #7225. Manifold height: A-3.65", B-4.35", measured to engine block; Carb pad height: 4.00". Port exit dimensions: 1.14" x 2.12". For the heights of all Edelbrock manifolds, please visit the the Manifold Reference Dimensions page.
Edelbrock Camshaft Recommendation CAMSHAFT RECOMMENDATIONS:Performer Plus #2192. See Camshaft section for cam card specifications.

CHRYSLER 413-440 V8
PERFORMER 440 (IDLE-5500 RPM)
Designed for street 413-426-440 c.i.d. Chrysler V8's that measure 8.75" across block. For EGR, #2191 is stock replacement/street legal part for 440 V8's with OEM 4-bbl. carb.; 1972-79. For non-EGR, #2191 is stock replacement/street legal part for 413, 426 (Wedge), 440 V8's with OEM 4-bbl. carb.; 1966-72 (1973 non-CA); except stock equipped EGR. Will not fit 1962-64 Max Wedge heads.
B/B Chrysler Performer Series Intake Manifolds by Edelbrock
Application Dyno Emissions Part #
Performer 440 (EGR/non-EGR) 2191
Edelbrock Carburetor Recommendation CARB RECOMMENDATIONS: OEM 4-bbl Edelbrock Thunder Series AVS or Performer Series (650-800 cfm) Carburetor, use our #1481 or #1843 Throttle/Transmission Lever Kit.
Edelbrock Installation Note INSTALLATION NOTE: Recommended intake gasket: #7225. Manifold height: A-3.80", B-4.80", measured to engine block; Carb pad height: 4.30". Port exit dimensions: 1.12" x 2.14". May require different EGR valve, see installation instructions.. For the heights of all Edelbrock manifolds, please visit the the Manifold Reference Dimensions page.
Edelbrock Camshaft Recommendation CAMSHAFT RECOMMENDATIONS: Performer Plus #2192. See Camshaft section for cam card specifications.

Edelbrock Tech Note PRODUCT EMISSIONS GUIDE
The following guide is designed to help you determine which Edelbrock components are legal for use on your vehicle. Learn more about Edelbrock Product Emissions Guide.

    50-State Legal
    For Racing Use ONLY
    For Use on Pre-Pollution Controlled Vehicles (PPCV)
    Stock Replacement Part
    Engine Swaps