Edelbrock Performance Intake Manifolds For Ford


 
PERFORMER® (IDLE - 5500 RPM)
Patented Dual-plane, low-rise design with a 180° firing order greatly improves torque over a wide rpm range for excellent throttle response from off-idle through 5500rpm. Performers are ideal for passenger cars, trucks, 4x4s and RV's.

289 / 302 / 351W351C / 351M / 400M5.0L5.8LBig-Block

Performer Series Intake Manifolds by Edelbrock
 
PERFORMER RPM™ (1500 - 6500 RPM)
A dual-plane, high-rise designed with a 180° firing order greatly produces incredible top-end horsepower while retaining great throttle response. Their larger plenums and runners match high-lift cams, free flowing exhausts and other modifications of a high-output engine. Great for street or strip.

289 / 302 / 351WBOSS / CLEVOR5.0L5.8LBig-Block

Performer RPM Series Intake Manifolds by Edelbrock
 
RPM AIR-GAP (1500 - 6500 RPM)
Offering a wide selection of multiple carburetor manifolds, or dual-quad designs. The all-new RPM Air-Gap dual-quads are the latest design, featuring an open air space that separates the runners from the hot engine oil for a cooler, denser charge for more power.

289 / 302 / 351W351CBig-Block

RPM Air-Gap Intake Manifolds by Edelbrock
 
TORKER/TORKER II (2500 - 6500 RPM)
These single plane, low rise intake manifolds offer high-rpm, street high-performance and low profile design on application where hood clearance is limited.

289 / 302 / 351W351CBig-Block

Torker / Torker II Intake Manifolds by Edelbrock
 
DUAL-QUAD/MULTI CARB
Offering a wide selection of multiple carburetor manifolds, or dual-quad designs. The all-new RPM Air-Gap dual-quads are the latest design, featuring an open air space that separates the runners from the hot engine oil for a cooler, denser charge for more power.

289 / 302 / 351WBig-Block (FE)

Dual-Quad / Multi Carb Intake Manifolds by Edelbrock
 
VICTOR® (3500 - 8500+ RPM)
Single-plane, high-rise intakes designed for maximum race-winning power at higher engine speeds. Engineered in conjunction with leading engine builders and racers from all forms of competition these intakes incorporate modern design with the latest racing technology. Victor manifolds are available for single or multiple-carburetor set-ups.

289 / 302 / 351W4.6L5.0L5.8LBig-Block

Victor Series Intake Manifolds by Edelbrock
 

PDF INSTALLATION INSTRUCTIONS
Download a printer friendly Warranty and Installation PDF (you will need Acrobat Reader® in order to view this PDF). If you do not have this installed you can download it by clicking the icon.
 
Installation Instructions for Intake Manifolds
Edelbrock Tech Note TECH NOTES: IMPORTANT A/B MEASUREMENTS
To ensure adequate hood clearance, check the height of your stock manifold and compare the "A" and "B" measurements against those of the Edelbrock manifold prior to purchase. The heights of all Edelbrock manifolds can bee seen on the Manifold Reference Dimensions page.

Please Note: To figure carburetor pad height, add dimensions "A" + "B" and divide by 2. For example: Performer manifold #2101: (A) 3.5" + (B) 4.6" 2 = 4.05"

Edelbrock Intake Manifold Important A/B Measurements