Edelbrock Dual-Quad Manifolds For Ford 289/302/351W


FORD 260-289-302 V8
F-28 DUAL-QUAD (1500-6500 RPM)
Designed for 289-302 c.i.d. Ford V8's. This manifold offers excellent performance as well as a hot looking package. With two Edelbrock carbs in-line, progressive throttle linkage and braided fuel line, this low-profile design allows adequate hood clearance and maintains great driveability. Mounting bosses for throttle cable brackets make the F-28 suitable for late-model applications. Carb center to carb center is 6-7/16". Use Performer-Plus cam #2122 for low-end torque or Torker-Plus cam #5022 for top-end power. See accessories section for chrome, Elite and Classic Series oval air cleaners for a great looking package.
Ford F-28 Dual-Quad Intake Manifolds by Edelbrock
Application Dyno Emissions Part #
F-28 Manifold (non-EGR) - 5435
Edelbrock Carburetor Recommendation CARB RECOMMENDATIONS: Edelbrock Thunder Series AVS #1803 and #1804, (500 cfm) Carburetor.
Edelbrock Installation Note INSTALLATION NOTE: Recommended intake gasket: Edelbrock #7220. Manifold height: A-3.90", B-4.75"; Carb pad height: 4.32". Port exit dimensions: 1.03" x 1.92". For the heights of all Edelbrock manifolds, please visit the the Manifold Reference Dimensions page.

FORD 260-289-302 V8
RPM AIR-GAP DUAL-QUAD (1500-6500 RPM)
Designed for 289-302 small-block Fords, these intakes are taller than the low-profile F-28 intake and offer performance improvements in the 1500-6500 rpm range. The large runners feature our unique Air-Gap design that separates the runners from the hot engine valley for a cooler, denser charge and more horsepower. Also available in complete manifold and carb kits
Ford RPM Air-Gap Dual-Quad Intake Manifolds by Edelbrock
Application Dyno Emissions Satin EnduraShine
RPM Air-Gap Dual-Quad Manifold for Ford 289-302 (non-EGR) - 7535 75354
Edelbrock Carburetor Recommendation CARB RECOMMENDATIONS: Edelbrock Thunder Series AVS #1803 and #1804, (500 cfm). #1403 and #1404, (500 cfm) Carburetor.
Edelbrock Installation Note INSTALLATION NOTE: Recommended intake gasket: Edelbrock #7220. Manifold height: A-4.85", B-5.70"; Carb pad height: 5.28". Port exit dimensions: 1.05" x 1.90". For the heights of all Edelbrock manifolds, please visit the the Manifold Reference Dimensions page.

FORD 351 WINDSOR V8
RPM AIR-GAP DUAL-QUAD 351W (1500-6500 RPM)
Designed for 351W small-block Fords, these intakes offer performance improvements in the 1500-6500 rpm range. The large runners feature our unique Air-Gap design that separates the runners from the hot engine valley for a cooler, denser charge and more horsepower. Includes bosses for rear water crossover. Also available in Manifold and carb kits.
Ford 351W Dual-Quad Intake Manifolds by Edelbrock
Application Dyno Emissions Satin EnduraShine
RPM Air-Gap Dual-Quad (non-EGR) - 7585 75854
Edelbrock Carburetor Recommendation CARB RECOMMENDATIONS: Edelbrock Thunder Series AVS #1803 and #1804, (500 cfm) Carburetor.
Edelbrock Installation Note INSTALLATION NOTE: Use 12-bolt intake gasket set Edelbrock #7220 recommended. For van installations use OEM Ford "van" intake gasket set. Manifold height: A-4.93", B-5.56"; Carb pad height: 4.32". Port exit dimensions: 1.05" x 1.89". For the heights of all Edelbrock manifolds, please visit the the Manifold Reference Dimensions page.

Edelbrock Tech Note PRODUCT EMISSIONS GUIDE
The following guide is designed to help you determine which Edelbrock components are legal for use on your vehicle. Learn more about Edelbrock Product Emissions Guide.

    50-State Legal
    For Racing Use ONLY
    For Use on Pre-Pollution Controlled Vehicles (PPCV)
    Stock Replacement Part
    Engine Swaps