Edelbrock Performer Series Manifolds For B/B Ford


FORD 332-428 V8
PERFORMER 390 (IDLE-5500 RPM)
Designed for street 332-352-360-390-406-410-427-428 c.i.d. Ford V8's with medium- or low-rise cylinder heads. #2105 is stock replacement/street legal part for 332, 352, 360, 390, 406, 410, 427 and 428 V8's with OEM 4V carb; 1966-72 (1973 non-CA); except stock equipped EGR. Manifold not equipped with EGR; will not accept stock Motorcraft spread-bore carburetor or fit heavy-duty 361 c.i.d. and 391 c.i.d. Ford truck V8's.
B/B Ford 390 Performer Series Intake Manifolds by Edelbrock
Application Dyno Emissions Satin Black
Performer 390 (non-EGR) 2105 21053
Edelbrock Carburetor Recommendation CARB RECOMMENDATIONS: Edelbrock Thunder Series AVS or Performer Series (600-800 cfm) Carburetor. For auto. trans. use our #1483 or #1844.
Edelbrock Installation Note INSTALLATION NOTE: Recommended intake gasket: Edelbrock #7224 or Fel-Pro #1247. Manifold height: A-4.35", B-5.50" (same as stock); Carb pad height: 4.92". Port exit dimensions: 1.06" x 1.75". For the heights of all Edelbrock manifolds, please visit the the Manifold Reference Dimensions page.
Edelbrock Camshaft Recommendation CAMSHAFT RECOMMENDATIONS: Performer Plus #2106. See Camshaft section for cam card specifications.

FORD 429/460 V8
PERFORMER 460 (IDLE-5500 RPM)
Designed for street 429/460 c.i.d. Ford V8's. #2166 is stock replacement/street legal part for 429 & 460 V8's with OEM 4-bbl. carburetor with electric choke; 1968-72 (1973 non-CA); except stock equipped EGR. #3766 is stock replacement/street legal part for 460 V8's with OEM 4V carburetor with electric choke; 1979-87. Will not fit 429 Cobra-Jets or 1966-68 462 Lincolns and will not accept stock spread-bore carb. Will not fit 1988 and later models. #3766 cannot use #8714 to block-off EGR. Must use stock OE EGR plate.
B/B Ford 460 Performer Series Intake Manifolds by Edelbrock
Application Dyno Emissions Satin Black
Performer 460 (non-EGR) 2166 21663
Performer 460 (EGR) - 3766 -
Edelbrock Carburetor Recommendation CARB RECOMMENDATIONS: #2166: Edelbrock Thunder Series AVS or Performer Series (650-800 cfm) Carburetor. For automatic transmission use our #1483 & #1495 or #1844 & #1848. #3766: OEM square-bore carb.
Edelbrock Installation Note INSTALLATION NOTE: Recommended intake gasket: Fel-Pro #MS96018. Replacement EGR plate gaskets: #3898. Manifold height: A-3.75", B-4.49" same as stock; Carb pad height: 4.12". Port exit dimensions: 1.65" x 1.96". For the heights of all Edelbrock manifolds, please visit the the Manifold Reference Dimensions page.
Edelbrock Camshaft Recommendation CAMSHAFT RECOMMENDATIONS: Performer Plus #2167. See Camshaft section for cam card specifications.

Edelbrock Tech Note PRODUCT EMISSIONS GUIDE
The following guide is designed to help you determine which Edelbrock components are legal for use on your vehicle. Learn more about Edelbrock Product Emissions Guide.

    50-State Legal
    For Racing Use ONLY
    For Use on Pre-Pollution Controlled Vehicles (PPCV)
    Stock Replacement Part
    Engine Swaps