Edelbrock Performer RPM Series Manifolds For Ford 289/302/351W


FORD 260-289-302 V8
PERFORMER RPM 302 (1500-6500 RPM)
Designed for 1965-79 street 326-455 c.i.d. Pontiac V8's (except Ram Air V and 265/301 V8's). Provides maximum high-rpm power while maintaining good throttle response for street. Recommended for high-performance street, strip and marine. Has clearance for HEI distributor. Will not fit under Trans Am Shaker hood without modifications. Also available as a complete manifold and carb kit.
Ford 302 Performer RPM Series Intake Manifolds by Edelbrock
Application Dyno Emissions Satin Polished Black EnduraShine
Performer RPM 302 (non-EGR) 7121 71211 71213 71214
Edelbrock Carburetor Recommendation CARB RECOMMENDATIONS: Edelbrock Thunder Series AVS or Performer Series (600-750 cfm) Carburetor. For auto. trans. use our #1483 & #1490 or #1844 & #1845.
Edelbrock Installation Note INSTALLATION NOTE: Will not fit 255 c.i.d. V8. Recommended intake gasket: Edelbrock #7220. Manifold Height: A-4.30", B-5.50"; Carb pad height: 4.90". Port exit dimensions: 1.05" x 1.86". For the heights of all Edelbrock manifolds, please visit the the Manifold Reference Dimensions page.
Edelbrock Camshaft Recommendation CAMSHAFT RECOMMENDATIONS: Performer Plus #7122. See Camshaft section for cam card specifications.

FORD 351 WINDSOR V8
PERFORMER RPM 351W (1500-6500 RPM)
Designed for 1969 and later 351 Windsor Ford V8 high-performance engines with Edelbrock Performer RPM cylinder heads, modified OEM cylinder heads or equivalent. The dual-plane design offers good throttle response with excellent top-end power for the street. Includes bosses for rear water crossover. Will fit 1964-1/2 to 1970 Mustangs. Will not fit under stock hood of 1974-78 or 1979-95 Mustangs. Aftermarket 4-bbl carbs are not compatible with Ford Auto Overdrive Transmission (AOD) unless used with Lokar bracket SRK-4000, for more info call (865) 966-2269 or go to www.lokar.com.
Ford 351W Performer RPM Series Intake Manifolds by Edelbrock
Application Dyno Emissions Satin Polished
Performer RPM 351W (non-EGR) - 7181 71811
Edelbrock Carburetor Recommendation CARB RECOMMENDATIONS: Edelbrock Thunder Series AVS or Performer Series (650-800 cfm) Carburetor. For auto. trans. use our #1483 & #1491 or #1844 & #1846.
Edelbrock Installation Note INSTALLATION NOTE: Use 12-bolt intake gasket set Edelbrock #7220 recommended. For van installations use OEM Ford "van" intake gasket set; will fit early 16-bolt head with Ford 16-bolt intake gasket set. Manifold height: A-4.30", B-5.30"; Carb pad height: 4.80". Port exit dimensions: 1.12" x 1.86". For the heights of all Edelbrock manifolds, please visit the the Manifold Reference Dimensions page.
Edelbrock Camshaft Recommendation CAMSHAFT RECOMMENDATIONS: Performer RPM #7182. See Camshaft section for cam card specifications.

Edelbrock Tech Note PRODUCT EMISSIONS GUIDE
The following guide is designed to help you determine which Edelbrock components are legal for use on your vehicle. Learn more about Edelbrock Product Emissions Guide.

    50-State Legal
    For Racing Use ONLY
    For Use on Pre-Pollution Controlled Vehicles (PPCV)
    Stock Replacement Part
    Engine Swaps