Edelbrock Performer RPM Series Manifolds For Ford 5.0L


FORD 5.0L EFI V8
PERFORMER 5.0 RPM II (1500-6500 RPM)
The Performer 5.0 RPM II manifold for 1986-95 5.0L Mustangs has shown significant gains in horsepower over existing designs in the 1500 to 6500 rpm range, and is ideally suited for street and strip applications. This manifold consists of a V-shaped crossover with an increasing cross-sectional area, which passes over to eight large tapered runners. Our 70mm throttle body is recommended (75mm will require port matching). 1994-95 Mustangs require Throttle Body Adapter #38353 and Adapter Kit #8025. May not fit with stock hood of 1994-95 Mustangs, aftermarket hood recommended. 50-state street legal for 1986-95 Ford Mustangs with 5.0L V8. Available with two finishes; #7123 upper manifold is powder-coated light titanium gray, #71233 features a black powder-coated upper and base.
Ford 5.0L Performer RPM Series Intake Manifolds by Edelbrock
Application Dyno Emissions Satin Black
Performer RPM 5.0 II (EGR, complete, base and upper) 7123 71233
Performer RPM 5.0 II Gasket Kit - - 7233 -
Fuel Rail Kit for #7123 - - 3628 -
Edelbrock Throttle Body Recommendation THROTTLE BODY RECOMMENDATIONS: See Edelbrock Throttle Body section.
Edelbrock Installation Note INSTALLATION NOTE: Recommended intake gasket: Edelbrock #7220. Air valve location is 0.30" higher and 0.50" forward from stock. Port exit dimensions: 1.16" x 2.0". Recommended cams: Ford SVO X-303 or Z-303. Overall height: 11.13". For the heights of all Edelbrock manifolds, please visit the the Manifold Reference Dimensions page.

THROTTLE BODY ADAPTERS FOR 1994-95 MUSTANGS
These adapters are required to install Edelbrock 5.0L manifolds #3821/#7123 on 1994-95 Mustangs. They must be used with Edelbrock 65mm, 70mm or stock throttle bodies. The powder-coating is the same titanium gray used on the Performer 5.0L and Performer RPM II 5.0L manifolds are black for a matched set. #3821/#3835 are stock replacement and 50-state street legal for 1994-95 5.0L engines.
Ford 5.0L Truck Performer Series Intake Manifolds by Edelbrock
Application Dyno Emissions Satin Black
1994-95 Mustang Throttle Body Adapter for Edelbrock 5.0L Manifolds #3821 & #7126 - 3835 38353
1994-95 Mustang EGR Supply Spacer for #7123 (use with #3835) - - 8025 -

Edelbrock Tech Note PRODUCT EMISSIONS GUIDE
The following guide is designed to help you determine which Edelbrock components are legal for use on your vehicle. Learn more about Edelbrock Product Emissions Guide.

    50-State Legal
    For Racing Use ONLY
    For Use on Pre-Pollution Controlled Vehicles (PPCV)
    Stock Replacement Part
    Engine Swaps