Edelbrock Performer RPM Series Manifolds For B/B Ford


FORD 332-428 V8
PERFORMER RPM FE (1500-6500 RPM)
Designed for high-performance street 390-406-410-427-428 c.i.d. Ford FE V8's with standard 390-428 c.i.d., 427 low/medium-rise or Edelbrock Performer RPM FE heads. The dual-plane constant cross-sectional area design builds low and mid-range acceleration while optimized runner paths make exceptional top-end horsepower. Has provision for adding the PCV or breather flange at rear. No exhaust crossover passage. Also available as a complete manifold and carb kit.
Ford FE Performer RPM Series Intake Manifolds by Edelbrock
Application Dyno Emissions Satin Black EnduraShine
Performer RPM FE (non-EGR) 7105 71053 71054
Edelbrock Carburetor Recommendation CARB RECOMMENDATIONS: Edelbrock Thunder Series AVS or Performer Series (650-800 cfm) Carburetor. For auto. trans. use our #1483 or #1844.
Edelbrock Installation Note INSTALLATION NOTE: Recommended intake gasket: Edelbrock #7224. Manifold height: A-4.89", B-6.04"; Carb pad height: 5.46". Port exit dimensions: 1.16" x 1.97". For the heights of all Edelbrock manifolds, please visit the the Manifold Reference Dimensions page.
Edelbrock Camshaft Recommendation CAMSHAFT RECOMMENDATIONS: Performer RPM #7106. See Camshaft section for cam card specifications.

FORD 332-428 V8
PERFORMER RPM 460 (1500-6500 RPM)
Designed for high-performance street 429-460 Ford V8's with standard or Cobra-Jet cylinder heads. Latest technology in dual-plane design results in excellent low- and mid-range torque and outstanding horsepower on appropriately equipped engines. Will accept square-bore or spread-bore carburetors. Will not fit 1988 and later models. Note: Early Cobra-Jets came with Quadrajets.
Ford 460 Performer RPM Series Intake Manifolds by Edelbrock
Application Dyno Emissions Part #
Performer RPM 460 (non-EGR) 7166
Edelbrock Carburetor Recommendation CARB RECOMMENDATIONS: Edelbrock Thunder Series AVS or Performer Series (650-800 cfm) Carburetor. For auto. trans. use our #1483 & #1495 or #1844 & #1848.
Edelbrock Installation Note INSTALLATION NOTE: Recommended intake gasket: Edelbrock #7223 or Fel-Pro #1230/#1231. Manifold height: A-4.81", B-6.15"; Carb pad height: 5.48". Port exit dimensions: 1.76" x 2.06". For the heights of all Edelbrock manifolds, please visit the the Manifold Reference Dimensions page.
Edelbrock Camshaft Recommendation CAMSHAFT RECOMMENDATIONS: Performer RPM #7167. See Camshaft section for cam card specifications.

Edelbrock Tech Note PRODUCT EMISSIONS GUIDE
The following guide is designed to help you determine which Edelbrock components are legal for use on your vehicle. Learn more about Edelbrock Product Emissions Guide.

    50-State Legal
    For Racing Use ONLY
    For Use on Pre-Pollution Controlled Vehicles (PPCV)
    Stock Replacement Part
    Engine Swaps