Edelbrock RPM Air-Gap Manifolds For Ford 289/302/351W


FORD 260-289-302 V8
RPM AIR-GAP 302 (1500-6500 RPM)
Designed for street 289-302 c.i.d. Ford V8's, the RPM Air-Gap incorporates the same race-winning technology that's been used on our Victor Series competition intakes for decades. The Air-Gap® design features an open air space that separates the runners from the hot engine oil resulting in a cooler, denser charge for more power. Includes nitrous bosses. No provision for exhaust heated chokes and no exhaust crossover. Edelbrock carbs will work with Ford automatic overdrive trans (AOD) when used with Lokar bracket SRK-4000, for more info call (865) 966-2269 or go to www.lokar.com. Available with satin, black or EnduraShine finish.
Ford 302 RPM Air-Gap Intake Manifolds by Edelbrock
Application Dyno Emissions Satin Black EnduraShine
RPM Air-Gap 302 (non-EGR) - 7521 75213 75214
Edelbrock Carburetor Recommendation CARB RECOMMENDATIONS: Edelbrock Thunder Series AVS or Performer Series (600-800 cfm) Carburetor. For auto. trans use our #1483 & #1490 or #1844 & #1845.
Edelbrock Installation Note INSTALLATION NOTE: Will not fit 255 c.i.d. V8. Recommended intake gasket: Edelbrock #7220. Manifold Height: A-4.30", B-5.50"; Carb pad height: 4.90". Port exit dimensions: 1.04" x 1.85". For the heights of all Edelbrock manifolds, please visit the the Manifold Reference Dimensions page.

FORD 351 WINDSOR V8
RPM AIR-GAP 351W (1500-6500 RPM)
Designed for street and high performance 351-400+ c.i.d. 351W Ford V8's, the RPM Air-Gap incorporates the same race-winning design that's been used on our Victor Series competition intakes for decades. The Air-Gap design features an open air space that separates the runners from the hot engine oil resulting in a cooler, denser charge for more power. Larger cross sectional area and a taller carb flange than #7181 for compatibility with large displacement, stroker 351W based engines. Includes bosses for nitrous and rear water crossover. Edelbrock carbs will work with Ford automatic overdrive trans (AOD) when used with Lokar bracket SRK-4000, for more info call (865) 966-2269 or go to www.lokar.com.
Ford 351W RPM Air-Gap Intake Manifolds by Edelbrock
Application Dyno Emissions Satin EnduraShine
RPM Air-Gap 351W (non-EGR) 7581 75814
Edelbrock Carburetor Recommendation CARB RECOMMENDATIONS: Edelbrock Thunder Series AVS or Performer Series (650-800 cfm) Carburetor. For auto. trans use our #1483 & #1491 or #1844 & #1846.
Edelbrock Installation Note INSTALLATION NOTE: Use 12-bolt intake gasket set Edelbrock #7220 recommended. Manifold height: A-5.31", B-6.19"; Carb pad height: 5.75". Port exit dimensions: 1.07" x 1.88". For the heights of all Edelbrock manifolds, please visit the the Manifold Reference Dimensions page.

Edelbrock Tech Note PRODUCT EMISSIONS GUIDE
The following guide is designed to help you determine which Edelbrock components are legal for use on your vehicle. Learn more about Edelbrock Product Emissions Guide.

    50-State Legal
    For Racing Use ONLY
    For Use on Pre-Pollution Controlled Vehicles (PPCV)
    Stock Replacement Part
    Engine Swaps