Edelbrock Torker II Series Manifolds For Ford 289/302/351W


FORD 260-289-302 V8
TORKER II 302 (2500-6500 RPM)
Designed for street 289/302 c.i.d. Ford V8's. Will not fit Boss 302. Manifold not equipped with EGR. Will not fit 255 c.i.d. Ford V8 engines. Not for heavy vehicles. Edelbrock carbs will work with Ford automatic overdrive trans (AOD) when used with Lokar bracket SRK-4000, for more info call (865) 966-2269 or go to www.lokar.com.
Ford 302 Torker II Series Intake Manifolds by Edelbrock
Application Dyno Emissions Part #
Torker II 302 (non-EGR) - 5021
Edelbrock Carburetor Recommendation CARB RECOMMENDATIONS: Edelbrock Thunder Series AVS or Performer Series carb (600-800 cfm) Carburetor, For auto. trans. use our #1483 & #1490 or #1844 & #1845.
Edelbrock Installation Note INSTALLATION NOTE: Will not fit 255 c.i.d. Ford V8. Recommended intake gasket: Edelbrock #7220. Manifold height: A-4.00", B-5.18"; Carb pad height: 4.59". Port exit dimensions: 1.03" x 1.93". For the heights of all Edelbrock manifolds, please visit the the Manifold Reference Dimensions page.
Edelbrock Camshaft Recommendation CAMSHAFT RECOMMENDATIONS: Torker Plus #5022. See Camshaft section for cam card specifications.

FORD 260-289-302 V8
TORKER II 351W (2500-6500 RPM)
Designed for 1969 and later 351 Windsor Ford V8 high-performance engines with Edelbrock heads, OEM 12- or 16-bolt heads or equivalent. Will not fit "Boss 351" Cleveland. Manifold not equipped with EGR. Edelbrock carbs will work with Ford automatic overdrive trans (AOD) when used with Lokar bracket SRK-4000, for more info call (865) 966-2269 or go to www.lokar.com.
Ford 351W Torker II Series Intake Manifolds by Edelbrock
Application Dyno Emissions Part #
Torker II 351W (non-EGR) - 5081
Edelbrock Carburetor Recommendation CARB RECOMMENDATIONS: Edelbrock Thunder Series AVS or Performer Series carb (600-800 cfm) Carburetor, For auto. trans. use our #1483 & #1491 or #1844 & #1846.
Edelbrock Installation Note INSTALLATION NOTE: Use 12-bolt intake gasket set Edelbrock #7220 recommended. For van installations use OEM Ford "van" intake gasket set; will fit early 16-bolt head with Ford 16-bolt intake gasket set. 1" open carburetor spacer, our #8710, is recommended when hood clearance permits. Manifold height: A-3.55", B-4.75", same as stock; Carb pad height: 4.15". Port exit dimensions: 1.02" x 1.82". For the heights of all Edelbrock manifolds, please visit the the Manifold Reference Dimensions page.
Edelbrock Camshaft Recommendation CAMSHAFT RECOMMENDATIONS: Torker Plus #5082. See Camshaft section for cam card specifications.

Edelbrock Tech Note PRODUCT EMISSIONS GUIDE
The following guide is designed to help you determine which Edelbrock components are legal for use on your vehicle. Learn more about Edelbrock Product Emissions Guide.

    50-State Legal
    For Racing Use ONLY
    For Use on Pre-Pollution Controlled Vehicles (PPCV)
    Stock Replacement Part
    Engine Swaps