Edelbrock Victor Series Manifolds For Ford 289/302/351W


FORD 260-289-302 V8
VICTOR JR. 302 (3500-8000 RPM)
For Ford 289/302 competition engines using modified stock cast iron or aftermarket Windsor-style cylinder heads such as Edelbrock heads #60259 and #77169 or equivalent. Victor Jr. #2921 has bosses for rear water crossover. Port exit size at cylinder head is 1.08" x 1.90" with enough extra material to open it up to 1.18" x 2.10".
Ford 302 Victor Series Intake Manifolds by Edelbrock
Application Dyno Emissions Part #
Victor Jr. 302 (non-EGR) - 2921
Edelbrock Carburetor Recommendation CARB RECOMMENDATIONS: Use appropriate racing Carburetor.
Edelbrock Installation Note INSTALLATION NOTE: Recommended intake gasket: Edelbrock #7220 or Fel-Pro #1250. Manifold height: A-5.50", B-5.50". For the heights of all Edelbrock manifolds, please visit the the Manifold Reference Dimensions page.

FORD 260-289-302 V8
SUPER VICTOR 8.2 (4500-9000 RPM)
Designed for high-rpm and competition 289/302 engines with aftermarket Windsor-style racing cylinder heads such as the Edelbrock Victor heads #77219 or Victor Jr. heads #77169, the Super Victor 8.2 is for engines with an 8.2" deck height. Excellent for large displacement drag racing engines, this single-plane race manifold delivers big power gains from 4500 to 8500 rpm and includes nitrous and rear cooling water bosses. The square-bore carburetor pad stands .850" taller than the Edelbrock Victor Jr. #2921.
Ford 8.2 Victor Series Intake Manifolds by Edelbrock
Application Dyno Emissions Part #
Super Victor 8.2 (non-EGR) - 2928
Super Victor EFI for 8.2 (non-EGR) - 29285
Ford Fuel Rail Kit (standard injectors with stands) - - 3620
Edelbrock Carburetor Recommendation CARB RECOMMENDATIONS: Use appropriate racing Carburetor.
Edelbrock Throttle Body Recommendation THROTTLE BODY RECOMMENDATIONS: Use #38783 4150 series 4V throttle body or #3849 EFI elbow and #3818 90mm Ford style Throttle Body.
Edelbrock Installation Note INSTALLATION NOTE: Recommended intake gasket: Fel-Pro #1262 or #1262R. Manifold height: A-6.35", B-6.35". For the heights of all Edelbrock manifolds, please visit the the Manifold Reference Dimensions page.

FORD 260-289-302 V8
SUPER VICTOR 8.7 (5000-9000 RPM)
Super Victor 8.7 is designed for high-rpm or competition Windsor Ford V8's with an 8.7" deck height SVO block. Ideal for use in drag racing applications operating between 5000 and 9000 rpm, the Super Victor #2934 has an "extra tall line of sight" runner layout for maximum flow. Designed for square-bore carbs, this single-plane manifold includes nitrous, rear cooling and throttle linkage bosses. Average runner cross sectional area is 3.1 square inches and port openings are sized to match Fel Pro #1262 gaskets.
Ford 8.7 Victor Series Intake Manifolds by Edelbrock
Application Dyno Emissions Part #
Super Victor 8.7 (non-EGR) - 2934
Edelbrock Carburetor Recommendation CARB RECOMMENDATIONS: Use appropriate racing Carburetor.
Edelbrock Installation Note INSTALLATION NOTE: Recommended intake gasket: Fel-Pro #1262. Manifold height: A-6.35", B-6.35". For the heights of all Edelbrock manifolds, please visit the the Manifold Reference Dimensions page.

FORD 351 WINDSOR V8
VICTOR JR. 351W (3500-7500 RPM)
Designed for competition 351 Windsor Ford V8's from 1969 and later with the following heads: Edelbrock Performer RPM heads #60259, Victor Jr. heads #77169, Victor heads #77219 or similar heads. Two versions available: #2980 fits SVO blocks with a 9.2" deck height and #2981 fits standard 351W blocks with a 9.5" deck height. Ideal for both oval track and drag racing engines operating between 3500 and 7500 rpm. Runners have a 2.70 square-inch cross sectional area.
Ford 351W Victor Jr. Series Intake Manifolds by Edelbrock
Application Dyno Emissions Part #
Victor Jr. 351W (9.2" deck) - 2980
Victor Jr. 351W (9.5" deck) - 2981
Edelbrock Carburetor Recommendation CARB RECOMMENDATIONS: Any size or type of Carburetor class allows.
Edelbrock Installation Note INSTALLATION NOTE: Recommended intake gasket: Edelbrock #7220 or Fel-Pro #1262. Manifold height: #2980 A-5.59", B-5.59"; #2981 A-5.75", B-5.75". For the heights of all Edelbrock manifolds, please visit the the Manifold Reference Dimensions page.

FORD 351 WINDSOR V8
SUPER VICTOR 351W (4500-8500 RPM)
Designed for high rpm or large displacement competition 351 Windsor Ford V8's with a deck height of 9.5" which are used in drag racing or oval track engines operating between 4500 and 8500 rpm. Super Victor #2924 can be used with ported factory cast iron heads, however aftermarket aluminum heads are recommended, such as Edelbrock Victor Jr. #77169 or Victor heads #77219 for ultra high-horsepower. Runners have a 3.20 square-inch cross sectional area.
Ford 351W Victor Series Intake Manifolds by Edelbrock
Application Dyno Emissions Part #
Super Victor 351W (9.5" deck) - 2924
Super Victor EFI for 351W (9.5" deck) - 29245
Ford Fuel Rail Kit (standard injectors with stands) - - 3620
Edelbrock Carburetor Recommendation CARB RECOMMENDATIONS: Any size or type of Carburetor class allows.
Edelbrock Installation Note INSTALLATION NOTE: #38783 4150 style 4V; or use #3849 EFI elbow and Ford style single 90mm throttle body #3818. Installation Notes: Recommended intake gasket: Fel-Pro #1262 or #1262R. MSD distributor #8578 must be used to clear the front water crossover. Manifold height: A-6.25", B-6.25". For the heights of all Edelbrock manifolds, please visit the the Manifold Reference Dimensions page.

FORD 351 WINDSOR V8
GLIDDEN VICTOR 351W (5000-9000 RPM)
Developed in conjunction with noted Ford drag racer Billy Glidden, this manifold is a larger version of our popular Super Victor 351W. Featuring a 4500 series carb pad, it is intended for high rpm and large displacement Windsor headed small-block Fords with a 9.5" deck height. The runner area has been enlarged to 3.6 square inches and the plenum has been increased to produce more high rpm power. To maintain optimum runner shape and location, the front water cross-over has been eliminated, but water fittings have been provided on the intake flange for external plumbing of a thermostat if desired. The carburetor pad height on this new manifold is only 0.250" taller than the 2924, making it ideal for single-carb all-out drag racing vehicles.
Ford Glidden 351W Victor Series Intake Manifolds by Edelbrock
Application Dyno Emissions Part #
Glidden Victor 351W for 4500 Series Carb (9.5" deck) - 2828
Edelbrock Carburetor Recommendation CARB RECOMMENDATIONS: Any size or type of Carburetor class allows.
Edelbrock Installation Note INSTALLATION NOTE: Recommended intake gasket: Fel-Pro #1262 or #1262R. Manifold height: A-6.97", B-6.97". For the heights of all Edelbrock manifolds, please visit the the Manifold Reference Dimensions page.

FORD 351 WINDSOR V8
SUPER VICTOR 9.2 (4500-8500 RPM)
Designed for high-rpm, large displacement and competition 351-Windsor Fords, the Super Victor 9.2 is for engines with a 9.2" deck height. Ideal for drag racing or oval track engines operating from 4500 to 8500 rpm, this single-plane intake is engineered for square-bore carbs and includes rear cooling and nitrous bosses. Runners have a 3.10 square-inch cross sectional area. Carb pad is 0.34" taller than Edelbrock Victor Jr. #2980. Match this race-winning manifold with Edelbrock Victor heads #77219 or Victor Jr. heads #77169.
Ford Glidden 351W Victor Series Intake Manifolds by Edelbrock
Application Dyno Emissions Part #
Super Victor 9.2 (9.2" deck) - 2929
Edelbrock Carburetor Recommendation CARB RECOMMENDATIONS: Any size or type of Carburetor class allows.
Edelbrock Installation Note INSTALLATION NOTE: Recommended intake gasket: Fel-Pro #1262 or #1262R. Manifold height: A-5.95", B-5.95". For the heights of all Edelbrock manifolds, please visit the the Manifold Reference Dimensions page.

FORD 351 WINDSOR V8
GLIDDEN VICTOR 351Y 4500 SERIES (5000-8500+ RPM)
Designed in conjunction with noted Ford drag racer Billy Glidden for raised port aluminum C3 SVO (Yates) cylinder heads, #2863 fits 9.2" deck heights. Victor Glidden 351Y #2863 has 3.2 square-inch runners. Both are perfect for all-out nitrous-assisted drag race applications. Carb mount flange and plenum are machined for 4500 Series carbs and require port matching and blending prior to use.
Ford Glidden 351Y Victor Series Intake Manifolds by Edelbrock
Application Dyno Emissions Part #
Victor 351Y for 9.2" with C3 Heads and 4500 Series Carb (non-EGR) - 2863
Valley Cover for Victor II or Victor SC-1 Pro-Port Raw Heads on a 9.2" Deck - 2832
Spacer Plate & Bolt Kit for #2863 on 9.5" Deck - 2864
Edelbrock Carburetor Recommendation CARB RECOMMENDATIONS: Use appropriate 4500 Series racing Carburetor.
Edelbrock Installation Note INSTALLATION NOTE: Recommended intake gasket: Fel-Pro #1253-3. Manifold height: #2863 A-7.16", B-7.16". For the heights of all Edelbrock manifolds, please visit the the Manifold Reference Dimensions page.

FORD 351 WINDSOR V8
VICTOR SC-1 (6000-9000 RPM)
This manifold is designed to work with a wide variety of engine combinations using the Ford SC-1 or Edelbrock #770769 cylinder heads on SVO blocks with 9.2" deck height. They provide outstanding torque throughout the rpm range for everything from dirt track applications to ARCA non-restricted engines. Will not fit cast iron Cleveland heads.
Ford SC-1 Victor Series Intake Manifolds by Edelbrock
Application Dyno Emissions Part #
Victor SC-1 with 9.2" Deck (non-EGR) - 2932
Edelbrock Carburetor Recommendation CARB RECOMMENDATIONS: Use any size or type Carburetor class allows.
Edelbrock Installation Note INSTALLATION NOTE: Recommended intake gasket: Fel-Pro #1253-3. Manifold height: #2932, A-8.38", B-8.38". For the heights of all Edelbrock manifolds, please visit the the Manifold Reference Dimensions page.

FORD 351 WINDSOR V8
GLIDDEN VICTOR SC-1 4150 SERIES (5000-8500+ RPM)
Designed in conjunction with noted Ford drag racer Billy Glidden for Ford SC-1 and Edelbrock Victor Pro-Port cylinder heads #770769, #2860 is intended for 400 c.i. and up high output race engines with a 9.5" deck height. The runner dividers are pulled back and the end runners are shortened to increase plenum size for more peak horsepower. It is the ideal manifold for dirt track or drag racing with Edelbrock Glidden Victor II Pro-Port heads #773169 in classes requiring in-line valve heads and a standard-flange carburetor.
Ford Glidden SC-1 4150Victor Series Intake Manifolds by Edelbrock
Application Dyno Emissions Part #
Glidden Victor for 9.5" with SC-1 Heads and 4150 Series Carb (spider only) - 2860
Valley Cover for Victor II or Victor SC-1 Pro-Port Raw Heads on a 9.5" Deck - 2833
Edelbrock Carburetor Recommendation CARB RECOMMENDATIONS: Use appropriate 4150 Series racing Carburetor.
Edelbrock Installation Note INSTALLATION NOTE: Recommended intake gasket: Fel-Pro #1253-3. Manifold height: A-7.47", B-7.47". For the heights of all Edelbrock manifolds, please visit the the Manifold Reference Dimensions page.

FORD 351 WINDSOR V8
GLIDDEN VICTOR SC-1 4500 SERIES (5000-8500+ RPM)
This manifold is another design from the race program of Billy Glidden for 9.5" deck height Windsor Fords. Designed for Ford SC-1 and Edelbrock Victor Pro-Port cylinder heads, #2868 is intended for 400 c.i. and up high output drag race engines typically using some additional power adder. It is influenced by current trends in Edelbrock's NASCAR manifolds, but the runner dividers are pulled back and the end runners are shortened to increase plenum size for more peak horsepower with a larger carburetor. It is the ideal manifold for drag racing with Edelbrock Glidden Victor SC-1 Pro-Port Raw heads #770769 and #773169 in classes without restrictions on heads or carb selection.
Ford Glidden SC-1 4500 Victor Series Intake Manifolds by Edelbrock
Application Dyno Emissions Part #
Glidden Victor for 9.5" with SC-1 Heads and 4500 Series Carb (spider only) - 2868
Valley Cover for Victor II or Victor SC-1 Pro-Port Raw Heads on a 9.5" Deck - 2833
Edelbrock Carburetor Recommendation CARB RECOMMENDATIONS: Use appropriate 4150 Series racing Carburetor.
Edelbrock Installation Note INSTALLATION NOTE: Recommended intake gasket: Fel-Pro #1253-3. Manifold height: A-7.47", B-7.47". For the heights of all Edelbrock manifolds, please visit the the Manifold Reference Dimensions page.

Edelbrock Tech Note PRODUCT EMISSIONS GUIDE
The following guide is designed to help you determine which Edelbrock components are legal for use on your vehicle. Learn more about Edelbrock Product Emissions Guide.

    50-State Legal
    For Racing Use ONLY
    For Use on Pre-Pollution Controlled Vehicles (PPCV)
    Stock Replacement Part
    Engine Swaps