Edelbrock Performance Intake Manifolds For Holden


 
PERFORMER® (IDLE - 5500 RPM)
Patented Dual-plane, low-rise design with a 180° firing order greatly improves torque over a wide rpm range for excellent throttle response from off-idle through 5500rpm. Performers are ideal for passenger cars, trucks, 4x4s and RV's.

Small-Block

Performer Series Intake Manifolds by Edelbrock
 
TORKER/TORKER II (2500 - 6500 RPM)
These single plane, low rise intake manifolds offer high-rpm, street high-performance and low profile design on application where hood clearance is limited.

Small-Block

Torker / Torker II Intake Manifolds by Edelbrock
 

PDF INSTALLATION INSTRUCTIONS
Download a printer friendly Warranty and Installation PDF (you will need Acrobat Reader® in order to view this PDF). If you do not have this installed you can download it by clicking the icon.
 
Installation Instructions for Intake Manifolds
Edelbrock Tech Note TECH NOTES: IMPORTANT A/B MEASUREMENTS
To ensure adequate hood clearance, check the height of your stock manifold and compare the "A" and "B" measurements against those of the Edelbrock manifold prior to purchase. The heights of all Edelbrock manifolds can bee seen on the Manifold Reference Dimensions page.

Please Note: To figure carburetor pad height, add dimensions "A" + "B" and divide by 2. For example: Performer manifold #2101: (A) 3.5" + (B) 4.6" 2 = 4.05"

Edelbrock Intake Manifold Important A/B Measurements