Edelbrock Performance Intake Manifolds For Honda / Acura


 
PERFORMER X (4500 - 8200 RPM)
Engineered for street/strip applications where peak horsepower and torque are achieved in the 4500-8200 RPM range. The large than stock plenum and 9-inch length runners are tuned to deliver peak power at high RPM and are ideal for naturally aspirated (all motor) applications. 50-State Street Legal.

B SeriesD Series

Performer Series Intake Manifolds by Edelbrock
 
VICTOR X (7000 - 10,000 RPM)
Optimized for maximum power from 7000 - 10,000 RPM, the VictorX intakes are designed for turbo and competition naturally aspirated applications. VictorX manifolds are cast with four additional bosses for nitrous or added fuel injectors. Also available machined with four additional fuel injector bosses and matching fuel rail.

B Series

Victor Series Intake Manifolds by Edelbrock
 

PDF INSTALLATION INSTRUCTIONS
Download a printer friendly Warranty and Installation PDF (you will need Acrobat Reader® in order to view this PDF). If you do not have this installed you can download it by clicking the icon.
 
Installation Instructions for Intake Manifolds
Edelbrock Tech Note TECH NOTES: IMPORTANT A/B MEASUREMENTS
To ensure adequate hood clearance, check the height of your stock manifold and compare the "A" and "B" measurements against those of the Edelbrock manifold prior to purchase. The heights of all Edelbrock manifolds can bee seen on the Manifold Reference Dimensions page.

Please Note: To figure carburetor pad height, add dimensions "A" + "B" and divide by 2. For example: Performer manifold #2101: (A) 3.5" + (B) 4.6" 2 = 4.05"

Edelbrock Intake Manifold Important A/B Measurements