Edelbrock Manifolds Approved For IMCA Stock Car / Sport Mod


CHEVROLET 262-400 SMALL-BLOCK V8
PERFORMER EPS (IDLE-5500 RPM)
Designed for 1986 and earlier 262-400 cubic-inch Chevys, the Performer EPS dual-plane manifold is optimized to deliver superior performance with Edelbrock square-bore Performer Series or Thunder Series AVS carburetors. This small-block Chevy manifold has a runner design that's "tuned" for peak torque at 3500 rpm on a 350-inch engine and it's ideal for power from off-idle to 5500 rpm. Dyno tests showed gains of 5 hp and 9 ft-lbs. of torque over the Edelbrock Performer manifold #2101 on a 350 Chevy. From 3000 to 4500 rpm, the increases averaged 5+ ft-lbs. of torque for more performance where you need it most. Performer EPS manifold #2703 combines a modern runner design with a front mounted oil fill tube for those who want the vintage look of our Classic valve covers with no breathers. #2703 has the same performance features as the Performer EPS #2701. Includes Oil Fill Tube (not installed) and matching push-in breather cap. The Oil Fill Tube and Breather are also available separately as #4803. Match with a dependable Edelbrock square-bore carburetor for maximum performance gains. Also available with choice of four finishes. Will not fit under stock Corvette hood. Available with satin, polished, black or EnduraShine™ finish.
Chevy Performer EPS (non-EGR) Intake Manifolds by Edelbrock
Application Dyno Emissions Part #
Performer EPS (non-EGR) 2701
Performer EPS W/ Oil Fill Tube (non-EGR) - 2703
Edelbrock Carburetor Recommendation CARB RECOMMENDATIONS: Edelbrock Thunder Series AVS or Performer Series (500-650 cfm) Carburetor.
Edelbrock Installation Note INSTALLATION NOTE: Recommended intake gasket: Edelbrock #7201. Manifold ht: A-3.74", B-4.80"; Carb pad height: 4.27". Port exit dimensions: 1.15" x 1.87". For the heights of all Edelbrock manifolds, please visit the the Manifold Reference Dimensions page.
Edelbrock Camshaft Recommendation CAMSHAFT RECOMMENDATIONS: #2102, #2103, #2208, #2209. See Camshaft section for cam card specifications.

CHEVROLET 262-400 SMALL-BLOCK V8
PERFORMER EPS VORTEC (IDLE-5500 RPM)
Based on the popular and powerful Edelbrock #2101, this dual-plane intake is designed for the street rod, industrial and engine swap market utilizing 262-400 c.i.d. Chevy V8's with 1996 and later Vortec (L31) cast iron or the Edelbrock E-Tec aluminum heads. Manifold has provisions for external water bypass and may be used on either Vortec blocks or 1995 and earlier blocks. No provision for exhaust heated chokes. Accepts both square-bore and spread-bore carbs and late model water neck, alternator, HEI and air conditioning brackets. Will not fit under stock Corvette hood. Available with standard, black or EnduraShine finish for a look you've got to see to believe. For high performance engines operating from 1500-6500 rpm, see the Performer RPM Vortec manifold. Available with satin, polished, black or EnduraShine™ finish.
Chevy Performer EPS Vortec (non-EGR) Intake Manifolds by Edelbrock
Application Dyno Emissions Part #
Performer Vortec (non-EGR) 2716
Edelbrock Carburetor Recommendation CARB RECOMMENDATIONS: OEM 4-bbl. (pre-1981, electric choke only) - Use our #8032 throttle bracket. Edelbrock Thunder Series AVS or Performer Series (500-650 cfm) Carburetor.
Edelbrock Installation Note INSTALLATION NOTE: Recommended intake gasket: Edelbrock #7235. Manifold height: A-3.87", B-5.28"; Carb pad height: 4.57". Port exit is 2.05" tall with slanted side walls. Stock brackets will require modification to fit the upright manifold bolt holes. For the heights of all Edelbrock manifolds, please visit the the Manifold Reference Dimensions page.
Edelbrock Camshaft Recommendation CAMSHAFT RECOMMENDATIONS: #2102, #2103, #2208, #2209. See Camshaft section for cam card specifications.

CHRYSLER 318/360 V8
VICTOR 340/360 (3500-8000 RPM)
Victor 340 is designed for 340-360 c.i.d. Chryslers using standard rectangular-port heads. For oval track and drag race engines operating from 3500-8000 rpm. Can be used on 318 c.i.d. engines with 340-360 heads. Will not fit 1992 and later Magnum engines. Accepts 1975 and earlier waterneck only.
Chrysler Victor 340/360 (non-EGR) Intake Manifolds by Edelbrock
Application Dyno Emissions Part #
Performer Vortec (non-EGR) - 2915
Edelbrock Carburetor Recommendation CARB RECOMMENDATIONS: Use appropriate racing Carburetor.
Edelbrock Installation Note INSTALLATION NOTE: Recommended intake gasket: Edelbrock #7276, Fel-Pro #1213. Manifold height.: A-4.15", B-5.70". For the heights of all Edelbrock manifolds, please visit the the Manifold Reference Dimensions page.

FORD 260-289-302 V8
PERFORMER RPM 302 (1500-6500 RPM)
Designed for street 289-302 c.i.d. Ford V8's. This dual-plane high rise manifold has excellent high rpm power while retaining throttle response. #7121 is a stock replacement/street legal part for Shelby Mustangs with 289 c.i.d. V8's with OEM 4V carb; 1965-66. No provisions for exhaust heated choke. Edelbrock carbs will work with Ford automatic overdrive trans (AOD) when used with Lokar bracket SRK-4000, for more info call (865) 966-2269 or go to www.lokar.com. Available with satin, polished, black or EnduraShine™ finish.
Ford Performer RPM (non-EGR) Intake Manifolds by Edelbrock
Application Dyno Emissions Part #
Performer Vortec (non-EGR) - 7121
Edelbrock Carburetor Recommendation CARB RECOMMENDATIONS: Edelbrock Thunder Series AVS or Performer Series carb, (600-750 cfm) for auto. trans. use our #1483 & #1490 or #1844 & #1845 Carburetor.
Edelbrock Installation Note INSTALLATION NOTE: Will not fit 255 c.i.d. V8. Recommended intake gasket: Edelbrock #7220. Manifold Height: A-4.30", B-5.50"; Carb pad height: 4.90". Port exit dimensions: 1.05" x 1.86". For the heights of all Edelbrock manifolds, please visit the the Manifold Reference Dimensions page.
Edelbrock Camshaft Recommendation CAMSHAFT RECOMMENDATIONS: Performer Plus #7122. See Camshaft section for cam card specifications.

FORD 260-289-302 V8
VICTOR JR. 302 (3500-8000 RPM)
For Ford 289/302 competition engines using modified stock cast iron or aftermarket Windsor-style cylinder heads such as Edelbrock heads #60259 and #77169 or equivalent. Victor Jr. #2921 has bosses for rear water crossover. Port exit size at cylinder head is 1.08" x 1.90" with enough extra material to open it up to 1.18" x 2.10".
Ford Victor Jr. (non-EGR) Intake Manifolds by Edelbrock
Application Dyno Emissions Part #
Victor Jr. 302 (non-EGR) - 2921
Edelbrock Carburetor Recommendation CARB RECOMMENDATIONS: Use appropriate racing Carburetor.
Edelbrock Installation Note INSTALLATION NOTE: Recommended intake gasket: Edelbrock #7220 or Fel-Pro #1250. Manifold height: A-5.50", B-5.50". For the heights of all Edelbrock manifolds, please visit the the Manifold Reference Dimensions page.

FORD 351 WINDSOR V8
PERFORMER RPM 351W (1500-6500 RPM)
For Ford 289/302 competition engines using modified stock cast iron or aftermarket Windsor-style cylinder heads such as Edelbrock heads #60259 and #77169 or equivalent. Victor Jr. #2921 has bosses for rear water crossover. Port exit size at cylinder head is 1.08" x 1.90" with enough extra material to open it up to 1.18" x 2.10".
Ford Perfromer RPM (non-EGR) Intake Manifolds by Edelbrock
Application Dyno Emissions Part #
Performer RPM 351W (non-EGR) - 7181
Edelbrock Carburetor Recommendation CARB RECOMMENDATIONS: Edelbrock Thunder Series AVS or Performer Series, (650-800 cfm), for auto. trans. use our #1483 & #1491 or #1844 & #1846. Carburetor.
Edelbrock Installation Note INSTALLATION NOTE: Use 12-bolt intake gasket set Edelbrock #7220 recommended. For van installations use OEM Ford "van" intake gasket set; will fit early 16-bolt head with Ford 16-bolt intake gasket set. Manifold height: A-4.30", B-5.30"; Carb pad height: 4.80". Port exit dimensions: 1.12" x 1.86". For the heights of all Edelbrock manifolds, please visit the the Manifold Reference Dimensions page.
Edelbrock Camshaft Recommendation CAMSHAFT RECOMMENDATIONS: Performer RPM #7182. See Camshaft section for cam card specifications.

FORD 351 WINDSOR V8
VICTOR JR. 351W (3500-7500 RPM)
Designed for competition 351 Windsor Ford V8's from 1969 and later with the following heads: Edelbrock Performer RPM heads #60259, Victor Jr. heads #77169, Victor heads #77219 or similar heads. Two versions available: #2980 fits SVO blocks with a 9.2" deck height and #2981 fits standard 351W blocks with a 9.5" deck height. Ideal for both oval track and drag racing engines operating between 3500 and 7500 rpm. Runners have a 2.70 square-inch cross sectional area.
Ford Victor Jr. (non-EGR) Intake Manifolds by Edelbrock
Application Dyno Emissions Part #
Victor Jr. 351W (9.2" deck) - 2980
Victor Jr. 351W (9.5" deck) - 2981
Edelbrock Installation Note CARB RECOMMENDATIONS: Any size or type of Carburetor class allows.
Edelbrock Installation Note INSTALLATION NOTE: Recommended intake gasket: Edelbrock #7220 or Fel-Pro #1262. Manifold height: #2980 A-5.59", B-5.59"; #2981 A-5.75", B-5.75". For the heights of all Edelbrock manifolds, please visit the the Manifold Reference Dimensions page.

FORD 351 CLEVELAND V8
PERFORMER RPM E-BOSS 351 (1500-6500 RPM)
Build a mock Boss 351 engine with a standard 351W block and Edelbrock Performer RPM Cleveland heads #61699 using the new Performer RPM E-Boss 351 manifold #7183. For both high-performance street and competition, the dual-plane design makes outstanding power from 1500 to 6500 rpm and the Cleveland port layout and intake bolt hole pattern fit both 2V and 4V heads. It features 9.5" deck height, Windsor end rails, water neck and distributor clearance, front and rear water bosses with a standard square bore carburetor pad. Edelbrock carbs will work with Ford automatic overdrive trans (AOD) when used with Lokar bracket SRK-4000, for more info call (865) 966-2269 or go to www.lokar.com.
Ford Performer RPM E-Boss 351 (non-EGR) Intake Manifolds by Edelbrock
Application Dyno Emissions Part #
Performer RPM E-Boss 351 (non-EGR) - 7183
Edelbrock Installation Note CARB RECOMMENDATIONS: Edelbrock Thunder Series AVS or Performer Series (600-800 cfm) Carburetor.
Edelbrock Installation Note INSTALLATION NOTE: Recommended intake gasket: Edelbrock #7265. Manifold height: A-4.42", B-5.70"; Carb pad height: 5.06". Port exit dimensions: 1.42" x 2.07". For the heights of all Edelbrock manifolds, please visit the the Manifold Reference Dimensions page.

Edelbrock Tech Note PRODUCT EMISSIONS GUIDE
The following guide is designed to help you determine which Edelbrock components are legal for use on your vehicle. Learn more about Edelbrock Product Emissions Guide.

    50-State Legal
    For Racing Use ONLY
    For Use on Pre-Pollution Controlled Vehicles (PPCV)
    Stock Replacement Part
    Engine Swaps