Edelbrock Performance Nitrous Systems & Accessories

Performance Nitrous Systems & Accessories by Edelbrock
Edelbrock is known for innovative products, and our new Nitrous Systems are no exception... All Edelbrock Nitrous Systems are dyno-tested and calibrated to deliver accurate and safe horsepower gains with even distribution to each cylinder. Our nitrous calibrations are determined through dyno-testing, not simple mathematical formulas, which do not take into account real-world variables. Available from 50 to 500+ horsepower, Edelbrock Nitrous Systems and components are the quickest and easiest way to get large horsepower increases with minimum engine modifications and expense. With the Performer and Performer RPM Line of Nitrous Systems, you get a 50 to 250 horsepower increase at the flip of a switch with an installation time of approximately 4 hours. New Performer RPM II systems include high-flow solenoids and stainless steel spray bars for 400+ hp capability. Victor Jr. racing systems produce serious horsepower with jetting supplied from 200 to 500+ horsepower. If you want to take it up to the extreme level we have the Edelbrock Series 1, Series 2 and Series 3 Direct-Port Nitrous Systems which yield huge gains in excess of 500+ horsepower!

NITROUS PRODUCTS CATALOG
Click here to view the web and mobile device friendly Nitrous Products Catalog.
This nitrous catalog is also print friendly and downloadable.
 
CARB & PLATE NITROUS SYSTEMS
Edelbrock Nitrous Plate Systems give you the horsepower numbers you are looking for in a system that's easier to install than other systems on the market. Designed to be the best carb/plate kits available, supplied with more jets than other brands giving you greater tuneability. Our spray bars are precision machined on an EDM machine instead of standard drilling, giving you the best flow characteristics available.

Learn More

Carb & Plate Nitrous Kits by Edelbrock
 
EFI NITROUS SYSTEMS
Performer EFI Nitrous Systems are the best way to get major power increase from your vehicle. Kits are supplied with all the necessary components and detailed instructions for a simple and clean installation. The nitrous system interfaces with the OE fuel system and increases fuel flow to the existing fuel injectors when the system is armed & triggered.

Learn More

EFI Nitrous Systems by Edelbrock
 
DIRECT PORT NITROUS SYSTEMS
Our most sophisticated, Direct Port Nitrous Systems allow you to tune each individual cylinder for superior performance! Utilizing your choice of either Edelbrock E1, Edelbrock/Glidden E2 stainless steel, our unique E3 titanium "Straight-Shot" nozzles, or Stainless Steel Dry nozzles for EFI applications, these direct port kits are designed for serious competition with power increases of up to 500 horsepower or more. To build a new system, match these kits with an Edelbrock Bottle Kit for maximum race-level performance with the bottle/bracket combination you want. For racers with an existing system, our manifold Plumb Kits include everything to plumb a manifold only.

Learn More

Direct Port Nitrous Systems by Edelbrock
 
CONCEALED NITROUS KITS
These easily Concealed Nitrous Kits are for carbureted and EFI applications. They can be installed in a matter of minutes and removed in even less, leaving no obvious signs of installation or use. Includes all necessary fittings, wiring, jets, solenoid and 12 oz. powder coated aluminum bottle for a complete installation.

Learn More

Concealed Nitrous Systems by Edelbrock
 
BOTTLES, BOTTLE KITS & ACCESSORIES
Edelbrock Nitrous Bottles are made of aluminum alloy, are D.O.T. approved and include an Edelbrock highflow CGA approved valve with a built-in siphon tube (unless noted otherwise) for consistent performance. Available with Silver Powder Coated, Polished and Carbon Fiber Wrapped(12.5-lb only) finish. In nine sizes to suit any application. Note: All bottles are shipped empty.

Learn More

Nitrous Bottles, Bottle Kits, Brackets & Accessories by Edelbrock
 
NITROUS NOZZLES (E1, E2, E3 & DRY)
Edelbrock Nitrous Nozzles are the most advanced Nozzles available producing the highest power output in the industry. The "E" Series available in three distinct designs: E1 aluminum 90 degree 1/8 NPT, E2 stainless steel 90 degree 1/16 NPT, and E3 titanium straight shot 1/16 NPT. All are CNC machined to strict tolerance and designed for maximum atomization and distribution. Edelbrocks "DRY" nozzle features a unique nitrous passage design providing extremely high atomization and is the key to the outstanding performance.

Learn More

Nitrous Nozzles by Edelbrock
 
NITROUS JETS
A full range of Edelbrock CNC-machined stainless steel Nitrous Jets and fuel taper face jets are available in virtually any size for your power and tuning requirements. Jets are available individually or in packs of 8.

Learn More

Nitrous Jets by Edelbrock
 
NITROUS & FUEL SOLENOIDS
Designed for Edelbrock nitrous systems, these stainless steel solenoids have a very low amp draw. They feature a stainless steel base for corrosion resistance and tighter tolerances, a low current-consumption coil, a PTFE plunger for reliability and longevity, and a powder coated coil cover for durability and appearance

Learn More

Nitrous Solenoids by Edelbrock
 
NITROUS ELECTRICAL COMPONENTS
Edelbrock offers a complete line of nitrous electrical components and accessories for your Nitrous System. The #71900 Progressive Controller offers extensive control over your nitrous system in a power full easy to program compact unit. Microswitch and bracket kits designed especially for Edelbrock, Barry Grant and Holley Carburetors.

Learn More

Nitrous Electrical Components by Edelbrock
 
NITROUS & FUEL PRESSURE GAUGES
Nitrous Pressure gauges and Fuel Pressure Gauges are an important element in getting maximum performance and consistency from your nitrous system. The 1-1/2" nitrous gauges may be fitted onto a nitrous bottle or just in front of the nitrous solenoid. Braided stainless steel lines are required for all remote mounted nitrous gauges, see page 39 for more info. 2-5/8" gauges are illuminated and come with adapter fittings. Liquid-filled gauges offer additional vibration dampening for durability and long-term accuracy. They are the best choice for competition or severe duty applications.

Learn More

Nitrous / Fuel Pressure Gauges by Edelbrock
 
NITROUS FITTINGS & HOSES
Russell Nitrous system hose assemblies are constructed using Russell Power-Flex stainless steel braided hose. They feature a PTFE inner liner and 308 stainless steel outer braid for the ultimate in strength, corrosion resistance and appearance. The Russell hose ends feature precision crimp installation using a hydraulic crimping method that provides a leak-free connection. Use Hoses with blue fittings for nitrous, and red fittings for fuel. Our wide variety of lightweight aluminum, stainless and brass adapter fittings allow for the connection of Russell nitrous hose ends to almost any component.

Learn More

Nitrous Fittings & Hoses by Edelbrock
 
PDF INSTALLATION INSTRUCTIONS
Download a printer friendly Warranty and Installation PDF (you will need Acrobat Reader® in order to view this PDF). If you do not have this installed you can download it by clicking the icon.
 
Installation Instructions for Nitrous