Edelbrock Nitrous Bottles, Bottle Kits & Bottle Accessories


ALUMINUM NITROUS BOTTLES
Edelbrock nitrous bottles are made of aluminum alloy, are D.O.T. approved and include an Edelbrock highflow CGA approved valve with a built-in siphon tube (unless noted otherwise) for consistent performance. In nine sizes to suit any application, Edelbrock bottles are availabe in silver powder coated or polished to a high luster. They include a pressure venting system to prevent pressure increases beyond the safety level. Note: All bottles are shipped empty.
Aluminum Nitrous Bottles by Edelbrock
Bottle Capacity Gauge Inc. Dimensions (length x diameter) Emissions Silver Polished
12-oz. unsiphoned No 13-1/8" X 2-3/8" 72472 72470
1.3-lb No 12" X 3 1/4" 72463 -
2-lb. unsiphoned No 11-1/4" X 4-3/8" 72360 72460
2-lb No 11-1/4" X 4-3/8" - 72461
2-1/2 lb. No 12-5/8" X 4-3/8" 72302 -
5 lb. No 17-5/8" X 5-1/4" 72304 -
10-lb. No 20" X 6-7/8" 72300 72400
10-lb. Yes 20" X 6-7/8" 72301 72401
15-lb. No 26-3/4" X 6-7/8" 72316 72416
15-lb. Yes 26-3/4" X 6-7/8" 72317 72417
20 lb. No 26-3/4" X 8" 72318 -

BOTTLE KITS
These nitrous bottle kits include an Edelbrock aluminum or polished bottle along with standard, quick-release or polished billet aluminum bottle brackets, plus a 14-foot 6AN supply line and bottle adapter. Match one of these kits with a direct port nitrouskit for a complete system.
Nitrous Bottle Kits by Edelbrock
Descrption Bottle Size Emissions Silver Polished
Nitrous Bottle with Red powder coated hinged steel brackets 10-lb. 72305 72306
Nitrous Bottle with quick-release brackets 10-lb. 72324 72325
Nitrous Bottle with polished billet aluminum brackets 10-lb. 72321 72323
Nitrous Bottle with Red powder coated hinged steel brackets 15-lb. 72309 72307
Nitrous Bottle with quick-release brackets 15-lb. 72332 72336
Nitrous Bottle with polished billet aluminum brackets 15-lb. 72331 72335

BOTTLES WITH RACER SAFETY ADAPTER & GAUGE
These nitrous bottles come with the Racer Safety Blow-Off Adapter and a liquid-filled nitrous pressure gauge pre-installed. This is a popular item for the racing community since many associations require the use of a Racer Safety Adapter if the bottle is installed in the passenger compartment.
Bottles with Racer Saftey Adapter & Gauge by Edelbrock
Application Emissions Part #
10-lb. Silver Powder Coated Bottle with Racer Safety Adapter & Liquid-filled Gauge 72311
15-lb. Silver Powder Coated Bottle with Racer Safety Adapter & Liquid-filled Gauge 72315

REPLACEMENT BILLET HANDWHEEL
This replacement handwheel fits our 5-lb., 10-lb., 15-lb., 20-lb., nitrous bottle valves.
Replacement Billet Hand Wheel by Edelbrock
Application Emissions Part #
Billet Handwheel 72352

REPLACEMENT PRESSURE RELIEF DISKS
These Pressure Relief Disks include Safety Blow Off Adapters.
Replacement Pressure Relief Disks by Edelbrock
Application Emissions Part #
Replacement Pressure Relief Disks for 12-oz./2-lb./2.5-lb. Bottles 72410
Replacement Pressure Relief Disks for 10-lb./12.5-lb./15-lb./20-lb. Bottles 72900

REPLACEMENT BOTTLE VALVE
Replacement high-flow valve and heavy-duty siphon tube for Edelbrock nitrous bottles.
Replacement Bottle Valves by Edelbrock
Application Emissions Part #
Standard 12-oz. Bottle Valve 72312
Standard 2-lb. Bottle Valve 72313
Standard 10-lb. Bottle Valve with Siphon Tube 72310
Standard 15-lb. Bottle Valve with Siphon Tube 72314

HINGED STEEL BRACKETS
Powder coated and made of steel, these hinged brackets are designed for use with Edelbrock or other brands of 10- and 15-lb., 7" diameter aluminum bottles. Includes rubber isolators to protect the finish.
Hinged Steel Brackets by Edelbrock
Application Emissions Red Grey
Hinged Steel Brackets (for 5-lb. aluminum bottles) 72609 -
Hinged Steel Brackets (for 20-lb. aluminum bottles) 72319 -
Hinged Steel Brackets (for 10-lb. and 15-lb. aluminum bottles) 72600 76204

QUICK RELEASE BRACKETS
Made from CNC-machined aluminum, these Edelbrock Quick Release Brackets are black powder coated for a unique high-tech look. Convenient thumb screw allows for quick bottle changes.
Quick Release Brackets by Edelbrock
Application Emissions Part #
Quick Release Brackets (for 10-lb. aluminum bottles) 72608
Quick Release Brackets (for 15-lb. aluminum bottles) 72605

POLISHED BILLET ALUMINUM BRACKETS
These great looking brackets are hinged for easy installation and removal. Roll Cage Mount Adapters are made of polished billet aluminum to match our billet bottle brackets. They work with brackets #72603, #72623 and #72664 to mount your bottle on your roll cage or chassis tubing.
Polished Billet Aluminum Brackets by Edelbrock
Application Emissions Part #
Polished Billet Brackets (for 10-lb. and 15-lb. aluminum bottles) 72603
Polished Billet Brackets (for 5-lb. aluminum bottles) 72607
Polished Billet Brackets (for 2-lb and 2.5-lb. aluminum bottles) 72664
Polished Billet Brackets (for 12-oz. bottles) 72665
1-3/4" Roll Cage Mount Adapter 72614
1-5/8" Roll Cage Mount Adapter 72615

NITROUS BOTTLE HEATER
Consistent bottle pressure (900-950 psi) is an important element for proper operation of your nitrous system. The Edelbrock nitrous bottle heater thermostatically raises the pressure when necessary by applying heat to the bottle. Comes with all necessary hardware and includes velcro straps for quick and easy bottle removal. Note: Not for use on carbon fiber bottles.
Nitrous Bottle Heater by Edelbrock
Application Emissions Part #
Bottle Heater - 12 volt (for 10-lb. and 15-lb. bottles) 72700

NITROUS BOTTLE BLANKET
This 1680 Denier nylon nitrous bottle blanket helps to maintain consistent bottle pressure by keeping heat in the bottle when it's cold, and by protecting the bottle from direct sunlight and the possibility of over-pressurization.
Nitrous Bottle Heater by Edelbrock
Application Emissions Part #
Bottle Blanket (for 10-lb. bottles) 72705

REMOTE ELECTRIC ARMING VALVE KIT
Allows you to open and close the bottle valve with the flip of a switch from inside the driver's compartment.
Remote Electric Arming Valve Kit by Edelbrock
Application Emissions Part #
Remote Electric Arming Valve Kit 72950

1/4-TURN BALL VALVE KIT
Our 1/4-Turn Ball Valve Kit is designed as an emergency shut off to isolate the nitrous in the bottle from the engine compartment in case of an emergency. The valve is typically installed in the driver's compartment within reach of the driver. If an accident or fire occurs, the driver or emergency personnel need only turn the handle a 1/4 of a turn to shut off nitrous flow to the solenoids.
1/4-Turn Ball Valve Kit by Edelbrock
Application Emissions Part #
1/4-Turn Ball Valve Kit (.375 orifice, rated to 2,000 psi) 72952

BOTTLE NUT COMBO WRENCH
This is one handy item to keep with your bottle. Compatible with all nitrous brands, fits in your glove box, under your seat, or even in your pocket. This wrench features 3AN, 4AN, 6AN, and 1-1/4" bottle nut wrenches all in one package. Black anodized aluminum and laser etched for a sharp, clean look!
Bottle Nut Combo Wrench by Edelbrock
Application Emissions Part #
Bottle Nut Combo Wrench 76504

PURGE VALVE KITS
Keeps the supply of fresh liquid nitrous at the solenoid(s) for instant and repeatable nitrous injection. This purge kit bleeds accumulated nitrous vapor from the supply lines. Includes solenoid, activation switch, filter, aircraft-quality fittings and wiring.
Purge Valve Kit by Edelbrock
Application Emissions Part #
4AN Purge Valve Kit 72176
6AN Purge Valve Kit 72178

BOTTLE NUT & WASHER
Keeps the supply of fresh liquid nitrous at the solenoid(s) for instant and repeatable nitrous injection. This purge kit bleeds accumulated nitrous vapor from the supply lines. Includes solenoid, activation switch, filter, aircraft-quality fittings and wiring.
Bottle Nut & Washer by Edelbrock
Application Emissions Part #
4AN Bottle Nut & Washer 76507
6AN Bottle Nut & Washer 76505
Washer For 6AN & 4AN Bottle Nuts 77580

NITROUS BLOW-DOWN TUBE, & SAFETY VALVE
CNC-machined Racer Safety Blow-Off Adapter replaces the standard safety valve to allow for the use of a hard line blow-down tube like the Edelbrock Nitrous Blow-Down Tube. At 22" long, our blow-down tube is longer than most competitors' tubes for easier installation. #72901 is a direct replacement for the safety valves that come with all Edelbrock nitrous bottles (5-lb. and larger). A blow-down tube is an essential safety feature for hatchbacks or cars with the bottle mounted in the passenger compartment. The blow-down tube will safely vent the nitrous outside the car should the safety blow.
Nitrous Blow-Down Tube & Misc. Components by Edelbrock
Application Emissions Part #
Nitrous Blow-Down Tube (22" long)r 72960
Racer Safety Blow-Off Adapter (for use with Blow-Down Tube) 72961
Standard Replacement Safety Valve 72901

Edelbrock Tech Note PRODUCT EMISSIONS GUIDE
The following guide is designed to help you determine which Edelbrock components are legal for use on your vehicle. Learn more about Edelbrock Product Emissions Guide.

    50-State Legal
    For Racing Use ONLY
    For Use on Pre-Pollution Controlled Vehicles (PPCV)
    Stock Replacement Part
    Engine Swaps