Edelbrock E-Force Supercharger Systems

Edelbrock E-Force Supercharger systems deliver excellent horsepower and torque in a complete, street-legal kit that fits under the factory hood. The core of each system is the Eaton Gen VI 2300 TVS® Supercharger rotating assembly. Eaton's assembly features a four lobe design with 160° of twist for maximum flow, minimum temperature rise and quiet operation for excellent drivability.

The supercharger assembly has been integrated into the intake manifold for a seamless design with minimal components, eliminating the possibility of vacuum leaks between gasket surfaces. Edelbrock's inverted supercharger assembly is uniquely oriented, allowing for an incredible amount of intake runner length for maximizing low end torque. An integrated bypass valve helps eliminate parasitic loss under light throttle for improved mileage potential. E-Force superchargers feature the most unique and efficient inlet configuration on the market. This results in a shorter, less restrictive intake path for improved air flow, without the need for a jack-shaft. Keeping the air cool is a high capacity air to water intercooler and low temp heat exchanger.

Finally... the Edelbrock E-Force Supercharger system is not just a performance upgrade, it also has great looks! The supercharger assembly and matching aluminum coil covers (on applicable systems) are black powdered coated for durability with highlighted fins and Edelbrock logo for a unique appearance that will give any engine compartment a custom look.

    Features Include:
  • Bolt-on installation - fits under the stock hood
  • Everything fits right out of the box, no welding, cutting or grinding
  • Features Eaton® TVS Rotor assembly; the same high-quality rotors used by GM on the Corvette ZR1
  • Self contained oil system with 100,000 mile service interval (no drilling or plumbing required)
  • Electronic PCM programming module, with application specific tuning (included with complete street legal systems)
  • High Flow Mass Air Flow Sensor (MAFS) on some applications
  • Integrated bypass valve for little to no decrease in fuel economy
  • 50-state emissions street legal - See listings for details
  • Available with an optional powertrain warranty - see specific listing for warranty details
  • Individual runners for each cylinder allow for maximum low end torque and instant throttle response
  • Designed, cast and made in the USA by Edelbrock
E-Force Supercharger Forum by Edelbrock

 
CHEVY CAMARO SUPERCHARGERS
426 horsepower not enough? Take an already high performance street car to the next level with an Edelbrock E-Force Camaro Supercharger! These supercharger systems are exclusively tailored for the 2010-13 Camaro SS and feature 12" long intake runners that allow for maximum low end torque. Its compact design fits under the stock hood and compliments the clean look of the engine compartment. The optional 5 year or 100,000 mile warranty is designed to give you peace of mind when installing the Edelbrock E-Force Supercharger system on your brand new Camaro SS.

Learn More

Camaro Superchargers by Edelbrock
 
CHEVY CORVETTE SUPERCHARGERS
E-Force Corvette Supercharger systems are designed to boost your Corvette to 554 flywheel horsepower and 515 ft.-lbs. of torque (with stock fuel pump) or 599 flywheel horsepower and 547 ft-lbs. of torque (includes high volume fuel pump). A unique feature of these systems is the 12" long intake runners that allow for maximum low end torque. The optional 5 year or 100,000 mile warranty is designed to give you peace of mind when installing it on a brand new car. Plus, this kit fits under the stock hood with no modifications without sacrificing runner length or intercooler area.

505 HP not enough? Then take your Z06 to an incredible 657 horsepower and 582 ft-lbs. of torque with an E-Force Supercharger system. This system is specially designed for the Z06 with a seamless integration with the dry sump system, plus it fits under the stock hood with no modifications! The manifold for this system was exclusively designed for the LS7 platform, unlike others on the market that utilize modified LS2/LS3 manifolds.

Learn More

Corvette Superchargers by Edelbrock
 
CHRYSLER HEMI® SUPERCHARGERS
Does your HEMI equipped Challenger, Charger, Magnum or 300 need more power? Then get an Edelbrock E-Force HEMI Supercharger system - the most efficient supercharger on the market for the popular Chrysler 5.7L, 6.1L and 6.4L HEMI engines. These complete supercharger systems provide maximum flow, minimum temperature rise, quiet operation and reliability only the Edelbrock name can guarantee. They feature minimum air restriction in and out of the supercharger for optimal flow. They also include individual 7" long intake runners that allow for maximum low end torque and great drivability.

Learn More

Chrysler HEMI® Superchargers by Edelbrock
 
FORD MUSTANG SUPERCHARGERS
These Edelbrock E-Force Mustang Supercharger systems will boost the performance of your Mustang to impressive levels without changing the daily driving characteristics. These systems are exclusively designed to provide instant, reliable and safe horsepower for a stock Mustang with low boost for minimum stress on the engine. They feature minimum air restriction in and out of the supercharger, along with individual long intake runners for maximum low end torque for great off throttle performance. E-Force superchargers provide the most power at the lowest amount of boost, resulting in performance that is safe to operate on a completely stock engine.

Learn More

Mustang Superchargers by Edelbrock
 
FORD TRUCK & SUV'S
Now you can bolt-on an Edelbrock E-Force Ford Truck/SUV Supercharger system and boost the power in your Ford F-150, Expedition or Lincoln Navigator. These E-Force Supercharger systems are specially designed for each application and will allow you to boost your performance up to an impressive 478 flywheel horsepower and 504 ft-lbs. of torque. These systems feature 14" long intake runners for maximum low end torque making them ideal for towing and off-road performance applications.

Learn More

Ford Truck & Suv's Superchargers by Edelbrock
 
GM TRUCK & SUV'S
Now you can bolt-on an Edelbrock E-Force GM Truck/SUV Supercharger system and boost the power in your GM truck or SUV. These E-Force Supercharger systems are specially designed for each application and will allow you to boost your towing performance to impressive levels. These systems feature 12" long intake runners for maximum low end torque making them ideal for towing and off-road performance applications.

Learn More

GM Truck & Suv's Superchargers by Edelbrock
 
UNVERSAL SUPERCHARGERS
Edelbrock has designed these Universal Supercharger systems for street rods and muscle cars with a GM LS1, LS2, LS3 or LS7 engine and other Gen III or Gen IV small blocks. The supercharger housing features 12" long runners for maximum low end torque and great drivability. System #1540 produced 599+ flywheel horsepower and 547+ ft-lbs. of torque. Edelbrock E-Force systems are designed to provide instant and reliable horsepower with low boost for minimum stress on the engine.

Its compact design fits under the stock hood on most applications and complements the clean look of any engine compartment. These systems require the use of a universal heat exchanger (sold separately). System #1540 includes handheld tuner for use with GM Parts LS Series Engine Control System #19258270. Call for custom configurations.

Learn More

Universal Superchargers by Edelbrock
 
NEW ENFORCER SUPERCHARGERS
The NEW E-Force Enforcer Supercharger systems for small-block & LS Chevy are a traditional positive displacement supercharger that is ideal for use in street rod and muscle car applications. They include a newly designed intake assembly with Eaton Gen VI 2300 TVS internals, manifold, drive pulleys, 10-rib serpentine belt, and all the necessary hardware. Complete systems are pre-assembled for an easy bolt-on installation. E-Force supercharger systems are available with or without dual-carburetors and EFI throttle bodies. These systems are designed to be installed on a factory style front end drive. Will not work directly with aftermarket serpentine systems. Both systems are available in a natural satin aluminum or high quality polished finish for a show quality classic look. Compatible with 6-7/16" center-to-center air cleaners.

Learn More

Small-Block Chevy Superchargers by Edelbrock
 
COMPONENTS & ACCESSORIES
There are many supercharger components and accessories you can choose from to make sure your E-Force Supercharger never skips a beat. Whether its a replacement part or a new accessorie, we have you covered!

Learn More

Supercharger Components & Accessories by Edelbrock
 
SUPERCHARGER SUPPORT
Edelbrock E-Force Supercharger Technical Support and downloads. If you are looking for any information that is not available here, please call the Edelbrock Tech Line: 800-416-8628

Learn More

Supercharger Technical Support by Edelbrock
 
PDF INSTALLATION INSTRUCTIONS
Download a printer friendly Warranty and Installation PDF (you will need Acrobat Reader® in order to view this PDF). If you do not have this installed you can download it by clicking the icon.
 
Installation Instructions for Superchargers