Edelbrock E-Force Superchargers For Chevy Corvette
Our E-Force Supercharger systems will take your Corvette to the next performance level. Each system utilizes a unique intake manifold housing design that is tailored towards each platform. Plus, this kit fits under the stock hood with no modifications without sacrificing runner length or intercooler area. Our C6 Z06 systems are specially designed for a seamless integration with the dry sump system.
Our new E-Force for the C7 Z06 is designed exclusively for the LT4 engine. The system includes a new intake manifold with Eaton 2300 TVS rotor assembly, making it an easy direct plug and play installation. The Stage 1 system utilizes the OEM belt offset and includes the intake manifold and tune for an easy swap. The Stage 2 system includes an intake manifold, pulley, belt and tune for the next step up for your Z06.
INSTALLATION NOTE: ALL 2017-Later Chevy Corvette Supercharger Systems WILL REQUIRE the ECM to be sent in for modification... NO HANDHELD PROGRAMMER INCLUDED. This process can take up to 5 days from the time your ECU is received! Every step of the process is handled with next day shipping.
System #1590 and #1591 can be installed on dry sump equipped Grand Sport models. This installation will require the use of Edelbrock Dry Sump Accessory Kit #15905 (sold separately). System #1574, #1575 and #1576 are for use on 2010-13 Corvette Grand Sport models equipped with a dry sump oil system. System #1591 can not be installed on Z06 or ZR1 models. Supercharger systems without tunes are not eligible for our Limited Powertrain Warranty. Supercharger systems sold without tunes are only emissions legal when used with the correct Edelbrock tune, which can be downloaded on the supercharger tech support page.
15% OVERDRIVE CRANK PULLEY This overdrive crank pulley is for use with a 2014-15 Corvette Stingray with an Edelbrock E-Force Supercharger system installed. It features an 8.7" diameter 10-rib secondary and stock diameter primary drive that delivers maximum traction and stability in supercharged applications. It's an ideal solution when a smaller pulley is not an option. This crank pulley is for use with Edelbrock C7 Corvette E-Force Supercharger systems only.
Overdrive Crank Pulley for C7 Corvette E-Force Supercharger Systems
DRY SUMP ACCESSORY KIT This kit includes everything needed to install E-Force Supercharger systems #1590 and #1591 on a 2010-13 Corvette Grand Sport equipped with a dry sump oiling system. For use with manual transmission models only. Not required for use with #1574 and #1575.
2005-13 CORVETTE 599 HP E-FORCE UPGRADE KIT This kit contains everything needed to upgrade Corvette Supercharger systems #1574, #1590 and #1593 from 554 HP to 599 HP. Includes fuel pump module and 3.5" pulley. (No tuning necessary)
E-Force Corvette Supercharger 599 HP Upgrade Kit (LS2/LS3)