Edelbrock E-Force Supercharger Components & Accessories


UNIVERSAL HEAT EXCHANGER KITS
Edelbrock offers a choice of three universal heat exchangers to work with the E-Force Universal Supercharger systems. These heat exchangers offer reliability and durable construction for high performance street applications.

#15405 is a full-face design that provides 31,000 btu/hr. of heat transfer. This exchanger is a single pass, single row, offset fin design with a 3/4" barbed inlet and outlet. It also features eight M6x1.0 threaded bungs, one at every corner, for easy installation.

#15406 is a compact single pass, two row design that provides 22,000 btu/hr. of heat transfer. It also features six M6x1.0 threaded bungs, two on the top and four on the bottom for ease of installation and a 3/4" barbed inlet and outlet.

#15407 is a single pass, single row design that features six, M6x1.0 threaded bungs, two on the right, two on the left and two on the bottom for ease of installation. Also includes a 3/4" barbed inlet and outlet on top and bottom for custom plumbing. This exchanger provides 22,000 btu/hr. of heat transfer.<

#15408 is a dual pass, single row design that features four, M6x1.0 threaded bungs, two on the right and two on the left for ease of installation. Also includes a 3/4" barbed inlet and outlet on one side for custom plumbing. This exchanger provides 55,000 btu/hr. of heat transfer.

Universal Heat Exchangers for E-Force Superchargers by Edelbrock
Application Emissions Part #
Universal Full-Face Heat Exchanger (Dimensions 22" W x 16.5" H x 1.5" D) - 15405
Universal Compact Heat Exchanger (Dimensions 26.5" W x 5" H x 2.62" D) - 15406
Universal Square Heat Exchanger (Dimensions 16" W x 16" H x 1.5" D) - 15407
Universal Large Heat Exchanger (Dimensions 34" W x 14" H x 2.25" D) - 15408

FUEL INJECTORS
Edelbrock has a complete selection of fuel injectors that are the perfect accessory for our competition supercharger systems. All of the USCAR style fuel injectors are high impedance and have a dual spray pattern for optimal distribution in multi-valve engines. All of the Bosch style connector fuel injectors are capable of supporting over 800 HP. Edelbrock fuel injector flow rates are at 300 kpa or 43.5 psi. All fuel injectors are sold in sets of 8.
Performance Fuel Injectors by Edelbrock
LB / HR Body Connector Kit Suplied In Kit For Use With Emissions Part #
41 Long USCAR #1580, #1581, #1582, #1583 - 15807
46 Medium USCAR #1530, #1532, #1536 #1531, #1533, #1537 15909
50 Long USCAR #1588 - 15901
52 Compact USCAR #1574, #1575, #1590, #1591, #1593, #1594, #1597, #1598 #1576, #1592, #1596, #1599 15907
60 Compact Minitimer #1572, #1540 #1573, #1576, #1586, #1592, #1595, #1596, #1599, #15997 15903
60 Long Minitimer - #1585, #1587, #1589 3686
Edelbrock Installation Note INSTALLATION NOTE: Fuel Injector Adapter (required for vehicles equipped with USCAR 60 lb. injectors sold in a set of (8) #15904.

FUEL RAILS FOR 2005-10 MUSTANGS
These fuel rails are designed for use with our 2005-10 Ford Mustang 4.6L 3V E-Force Supercharger Competition systems. These high capacity fuel rails are made from extruded aluminum and feature -6 AN ends for increased flow to support the demands needed in high horsepower applications. They also include positioning brackets to secure the injector in the ideal position for optimum performance. Kit contains fuel rails, fuel hoses, fittings, mounting brackets and all of the necessary hardware needed for installation.
E-Force Fuel Rail Kit for 2005-10 Ford Mustang (4.6L 3V) by Edelbrock
Application Emissions Part #
E-Force Fuel Rail Kit for 2005-10 Ford Mustang (4.6L 3V) - 3623

PC INTERFACE KIT
This kit is for use with the DiabloSport Predator handheld tuning module supplied with E-Force Supercharger systems #1530, #1532, #1536, #1580 and #1582. It allows for updated calibrations to be downloaded from the Edelbrock web site, which can then be uploaded to the vehicle's ECU. Includes an AC adapter, USB to Serial cable and a CD containing the necessary Windows, Mac and Linux (!) drivers.
PC Interface Kit for DiabloSport Predator Tuning Module by Edelbrock
Application Emissions Part #
PC Interface Kit for DiabloSport Predator Tuning Module - 15809

E-FORCE COMPETITION AIR INTAKE KITS
E-Force Competition Air Intake kits provide the increased air flow needed for racing applications. They include a high flow Mass Air Flow Sensor (on some applications), reusable open element filter, plastic shroud and all necessary hardware for installation. Mustang GT kits include a 7.85" long, reusable, open element filter and a plastic intake shroud. Camaro kit utilizes a 9" long, reusable, open element filter and plastic intake shroud. Kit #15803 is intended for use when upgrading from system #1580, which already includes a sensor. These kits are for Competition use only.
E-Force Competition Air Intake Kits by Edelbrock
Application Emissions Part #
Competition Air Intake Kit for 2010-13 Camaro SS (uses factory MAF sensor) 15988
Competition Air Intake Kit for 2005-09 Mustang GT (without MAF sensor) 15803
Competition Air Intake Kit for 2005-09 Mustang GT 15808
Competition Air Intake Kit for 2010 Mustang GT 15828
Competition Air Intake Kit for 2011-13 Mustang GT 15898

PRO-CHARGE™ AIR FILTER CLEANING KIT
The Edelbrock Pro-Charge Air Filter cleaning kit is the ideal formula for keeping performing at its best. Designed for use with any oil-based air filter element and available in a complete kit or individually.
Pro-Charge Air Filter Cleaning Kit by Edelbrock
Application Emissions Part #
Pro-Charge™ Air Filter Cleaning Kit (includes #43601 & #43602) - 43600
Air Filter Cleaner (10.14 oz) - 43601
Air Filter Oil (10.14 oz) - 43602

REPLACEMENT CONICAL AIR FILTER
These replacement air filters will work with Edelbrock E-Force Competition Air Intake Kits as well as other aftermarket cold air intake systems. Available in 7" or 9" length with a 6" inlet diameter. Both air filters are washable and reusable.
Replacement Conical Air Filter by Edelbrock
Application Emissions Part #
7" Universal Replacement Conical Air Filter 15403
9" Universal Replacement Conical Air Filter 15404

MAF SENSOR KITS
Edelbrock's high flow Mass Air Flow Sensor (MAFS) for GM and Ford applications are the perfect upgrade for any MAFS equipped vehicle with performance upgrades that have elevated air flow above the range of the stock sensor. The Ford sensor #15402 increases the air flow to 113 lbs. per minute. Both kits utilize a large 95mm venturi style housing that reduces air flow restriction and improves the overall horsepower potential. These sensors feature an injection molded housing for OEM level precision with a modern blade-style element for the latest in technology and easy installation on newer vehicles. Match these kits with our conical air filter for the optimal air flow performance upgrade.
Maf Sensor Kits by Edelbrock
Application Emissions Part #
Mass Air Flow Sensor Kit for GM Universal Applications 15401
Mass Air Flow Sensor Kit for Ford Universal Applications 15402

OVERDRIVE DAMPER FOR 5.0L COYOTE
This is a factory style overdrive damper for the Ford 5.0L Coyote engine. It features a 7.75" diameter 8-rib design that delivers maximum traction and stability in supercharged applications. Can also be used with 6-rib applications. It's an ideal solution for any supercharged application where a smaller pulley is not an option. This is the same dampner used on our E-Force Coyote crate engine. This damper is SFI approved and recommended for supercharged applications only.
Overdrive Damper For 5.0L Coyote by Edelbrock
Application Emissions Part #
Harmonic Damper for Ford 5.0L Coyote Engines (7.75" diameter) - 15819

PULLEYS
Edelbrock E-Force Supercharger pulleys allow you to fine tune the air flow and performance of your E-Force Supercharger system to your preference. They are available in a 6-rib design for use with any of our Stage 3 Professional Tuner systems and a 10-rib design for use with our new small-block Chevy E-Force Classic systems.
Supercharger Pulleys by Edelbrock
Application Emissions Polished Black
6-RIB: FOR USE WITH PROFESSIONAL TUNER STAGE 3 SYSTEMS
2.75" - 15823
3.00" - 15822
3.25" - 15821
3.50" - 15820
3.75" - 15825
3.875" - 15824
4.125" - 15826
 
10-RIB: FOR USE WITH ENFORCER SYSTEMS
2.75" 15855 15854
3.00" 15853 15852
3.25" 15851 15850
3.50" 15829 15849
3.75" 15844 15848
4.125" (included in base kit) 15842 15845

BELT TENSIONER COVER FOR ENFORCER SYSTEMS
The billet belt tensioner covers are the perfect way to complete the look of the Enforcer supercharger. Available in a high quality mirror polish or black hard anodized black finish.
Belt Tensioner Cover For Enforcer Systems by Edelbrock
Application Polished Black
Tensioner Cover For Enforcer Supercharger Systems 15551 15553

BELT TENSIONER BRACE
This belt tensioner brace is intended for use on 2005-10 Mustangs, 2004-10 F-150 trucks and 2007-12 Ford SUVs with an aftermarket supercharger installed. The stock belt tensioner is made of cast aluminum and has been known to bend or break under extreme conditions. The Edelbrock Steel Belt Tensioner Brace is an inexpensive upgrade to eliminate this common problem. It simply bolts on to your stock tensioner and prevents any deflection of the cast arm. Already included with E-Force supercharger systems #1580, #1581, #1582, #1583, #1585 and #1587.
Belt Tensioner Brace by Edelbrock
Application Emissions Part #
Steel Belt Tensioner Brace - 15806

TENSIONER UPGRADE KITS FOR GM
Tensioner Upgrade Kits are engineered to handle the increased belt stress encountered in high horsepower E-Force applications. They are an upgrade for any Edelbrock Supercharger system produced prior to February 2013 and are now included on all systems thereafter. Kits includes tensioner, tensioner mounting bracket, Gatorback drive belt and hardware.
Tensioner Upgrade Kits For GM by Edelbrock
Application Emissions Part #
Tensioner Upgrade for #1597 - 15028
Tensioner Upgrade for #1598 - 15029
Tensioner Upgrade for #1596, #1599 & #15997 - 15032
Tensioner Upgrade for #1574, #1590 & #1593 - 15034
Tensioner Upgrade for #1572, #1575, #1591 & #1594 - 15035
Tensioner Upgrade for #1573, #1576, #1592 & #1595 - 15039

ALUMINUM COIL COVERS
Dress up your competition kit with these coil covers that are included with the E-Force complete supercharger systems #1530, #1532, #1536, #1572, #1574, #1575, #1580, #1582, #1590, #1591, #1593, #1594, #1597 and #1598.
Aluminum Coil Covers by Edelbrock
Application Emissions Part #
Aluminum Coil Covers for 2005-10 4.6L Ford Mustang GT - 41133
Aluminum Coil Covers for 2005-13 C6 Corvette - 41123
Aluminum Coil Covers for 2010-13 Grand Sport Corvette with Dry Sump (LS3) & Z06 (LS7) - 41103
Aluminum Coil Covers for 2010-14 Camaro SS - 41143
Aluminum Coil Covers for 2005-10 Chrysler HEMI - 41113
Aluminum Coil Covers for 2011-14 Chrysler HEMI - 41114

E-FORCE SUPERCHARGER LID REPLACEMENT GASKET
This is a replacement gasket for the E-Force supercharger lid cover. Will fit the following applications: Camaro systems 1596, 1597, 1598, 1599; Corvette systems 1572, 1573, 1574, 1575, 1576, 1590, 1591, 1592, 1593, 1594, 1595; Truck/SUV systems 1564, 1567, 1577, 1578, 1579.
E-Force Supercharger Lid Replacement Gasket by Edelbrock
Application Part #
E-Force Supercharger Lid Replacement Gasket 7397

CAMARO TOP & COIL COVER DESIGN
We're excited to debut a new look for our Camaro E-Force Supercharger systems. This new aggressive design will be available on all E-Force Camaro systems shipping in 2014. It features vented coil cover design to help reduce heat build up during extreme driving and weather conditions, along with a two-tone black and red powder coated finish with inset "Supercharged" badges. This new design retains the same bolt pattern and is compatible with all of the previous E-Force GM based systems. For use with 2010-13 Camaro models only, will not fit 2014 models, due to interference with the hood vent.
E-Force Camaro Manifold Top & Coil Covers by Edelbrock
Application Emissions Part #
(NEW LOOK) E-Force Camaro Manifold Top & Coil Covers - 41144

Edelbrock Tech Note PRODUCT EMISSIONS GUIDE
The following guide is designed to help you determine which Edelbrock components are legal for use on your vehicle. Learn more about Edelbrock Product Emissions Guide.

    50-State Legal
    For Racing Use ONLY
    For Use on Pre-Pollution Controlled Vehicles (PPCV)
    Stock Replacement Part
    Engine Swaps