Edelbrock E-Force Superchargers For Ford Mustangs

These Edelbrock E-Force Supercharger systems will boost the performance of your Mustang to impressive levels without changing the daily driving characteristics. These Mustang Supercharger systems are exclusively designed to provide instant, reliable and safe horsepower for a stock Mustang with low boost for minimum stress on the engine. They feature minimum air restriction in and out of the supercharger, along with individual long intake runners for maximum low end torque for great off throttle performance. E-Force superchargers provide the most power at the lowest amount of boost, resulting in performance that is safe to operate on a completely stock engine.

AVAILABLE IN THE FOLLOWING PERFORMANCE LEVELS...

Stage 1 - Street Systems
These systems are emissions legal and provide the best combination for your daily driver.

Stage 2 - Track Systems
These systems include all of the components of our Stage 1 systems with the addition of a competition air intake kit, smaller pulley, injectors (if required), fuel pump (if required) and a custom tune optimized for these upgrades, giving you a great start for any street/strip setup. For competition racing use only. Available complete or as an upgrade.

Stage 3 - Professional Tuner Systems
Our Professional Tuner systems include all of the essential components that a racer or tuner would need to build a custom supercharged racing setup. They offer the flexibility of choosing the right pulley, cold air intake, etc. for any custom supercharged installation. For competition racing use only.

PLEASE NOTE: Supercharger systems without tuners are not eligible for supplemental warranty. Supercharger systems sold without tuners are only emissions legal when used with the correct Edelbrock tune. Systems with tuners are available with a 3 year/36,000 mile or 5 year/100,000 mile warranty.


STAGE 1 / STREET SYSTEMS / 466-559 HP & 439-503 TQ
Stage 1 Supercharger Systems For Ford Mustang by Edelbrock
Application Dyno Emissions With Tuner Without Tuner
2005-09 Ford Mustang (4.6L 3V) 1580 15800
2010 Ford Mustang (4.6L 3V) 1582 15890
2011-14 Ford Mustang (5.0L 4V) 1588 15880
Edelbrock Installation Note INSTALLATION NOTE: 2005-06 installations require the use of Cooling Upgrade Kit #15804 (sold separately). 2009 installations will require Hardware Kit #15805 (sold separately). Kit #15880 will fit BOSS Mustangs and will require custom tuning.

STAGE 2 / TRACK SYSTEMS / 529-636 HP & 494-538 TQ
Application Dyno Emissions With Tuner Without Tuner
2005-09 Ford Mustang (4.6L 3V) 15856 -
Track System Upgrade Kit For 2005-09 Ford Mustang (4.6L 3V) - - 15802
2011-14 Ford Mustang (5.0L 4V) 15896 -
Track System Upgrade Kit For 2011-14 Ford Mustang (5.0L 4V) - - 15882
Edelbrock Installation Note INSTALLATION NOTE: 2005-06 installations require the use of Cooling Upgrade Kit #15804 (sold separately). 2009 installations will require Hardware Kit #15805 (sold separately).

STAGE 3 / PROFESSIONAL TUNER SYSTEMS / 700+ HP & 600+ TQ
Stage 3 Supercharger Systems For Ford Mustang by Edelbrock
Application Dyno Emissions Without Tuner
2005-09 Ford Mustang (4.6L 3V) - 1585
2010 Ford Mustang (4.6L 3V) - 1587
2011-14 Ford Mustang (5.0L 4V) - 1589
Edelbrock Installation Note INSTALLATION NOTE: 2005-06 installations require the use of Cooling Upgrade Kit #15804 (sold separately). 2009 installations will require Hardware Kit #15805 (sold separately).

2005-06 MUSTANG COOLING SYSTEM UPGRADE KIT
Our Cooling System Upgrade kit is necessary when installing E-Force Supercharger system #1580 or #1585 in a 2005-06 Mustang GT. This kit relocates the thermostat from the cold side of the radiator to the hot side for improved cooling. Kit contains all necessary hoses, clamps and hardware.
Cooling System Upgrade Kit (for 2005-06 Ford Mustang GT) by Edelbrock
Application Emissions Part #
Cooling System Upgrade Kit (for 2005-06 Ford Mustang GT) - 15804

2009 MUSTANG HARDWARE KIT
This kit includes new intake gaskets and necessary hardware for installing E-Force Supercharger system #1580 or #1585 on 2009 Mustang 4.6L engines.
Hardware Kit (for 2009 Ford Mustang GT) by Edelbrock
Application Emissions Part #
Hardware Kit (for 2009 Ford Mustang GT) - 15805

SYSTEMS COMPARISON CHART
STAGE 1 STAGE 2 STAGE 3
Features 1580 1582 1588 15856 15896 1585 1587 1589
Supercharger Manifold Assembly (Featuring Eaton TVS Rotors)
85mm Electronic Throttle Body
Cast Aluminum Front Drive Bracket
Steel Belt Tensioner Brace
Heavy Duty Automatic Belt Tensioner
Cast Aluminum Water Crossover
Large 110 Sq-in Intercooler
Dual Core Low Temp. Heat Exchanger for Intercooler System
Full Face, Low Temp. Heat Exchanger for Intercooler System
Goodyear® Gatorback™ Serpentine Belt
Electric Intercooler Water Pump
Intercooler Recovery Tank
Custom Molded Intercooler Hoses
Fuel Injectors (41 lb/hr)
Fuel Injectors (50 lb/hr)
Fuel Injectors (60 lb/hr)
Supercharger Pulley 3.875"
Supercharger Pulley 3.75"
Supercharger Pulley 3.25"
HT0 Spark Plugs for 2005-early 2008 Models
Steel Idler Pulleys With Heavy Duty High Speed Bearings
High Flow Panel Air Filter for Stock Airbox
Extended Range, Drop-in Style, MAFS
Injection Molded, High Flow, Air Box Cover
Edelbrock Aluminum Engine Covers
Extruded Aluminum Fuel Rails
Handheld Calibration Module
Plug & Play, Electrical Harness & Installation Hardware
Cold Air Intake System

Edelbrock Tech Note PRODUCT EMISSIONS GUIDE
The following guide is designed to help you determine which Edelbrock components are legal for use on your vehicle. Learn more about Edelbrock Product Emissions Guide.

    50-State Legal
    For Racing Use ONLY
    For Use on Pre-Pollution Controlled Vehicles (PPCV)
    Stock Replacement Part
    Engine Swaps