Edelbrock Timing Chain Sets


PERFORMER-LINK TRUE-ROLLER TIMING CHAIN SETS
Performer-Link timing chain sets are for use with Edelbrock or stock cams. They have a solid-bushing chain for a true bearing surface that rolls with the sprockets, eliminating chain stretch. Cam sprockets are made from 35,000 psi tensile strength cast iron. Crank sprockets are made from billet SAE-1144 steel and induction heat treated. Four Performer-Link sets are stock replacement parts and 50-state legal (see listings in bold type). All other sets have three keyway setting points to ensure accurate timing selection for early or late-model vehicles. Performer-Link timing sets are not for use above 6500 rpm
Performer-Link True-Roller Timing Chain Sets by Edelbrock
Application Year Emissions Set Part # Chain Only
AMC
V8 290, 304, 343, 360, 390, 401 1967-91 7818 -
 
Buick, Olds, Pontiac V6 & 215 V8
V8 215 1961-63 7828 -
V6 198, 225, 231 w/o integral distributor drive 1962-77 7828 -
V6 183, 196, 231, Turbo, 252 w/ integral distributor drive 1977-88 7829 -
 
Buick
V8 400-430-455 late 1967-76 7840 -
 
Chevrolet
V6 (90°) 200, 229 (3.8L), 262 (4.3L) (A) 1978-86 7800 7844
V6 (90) 200, 229 (3.8L), 262 (4.3L) (A) (C) 1978-86 7802 -
V6 (90) 262 (4.3L) (B) 1987-95 7801 -
V8 262, 265, 267, 283, 302, 305, 307, 327, 350, 400 (A) 1955-95 7800 7844
V8 305, 350 (B) 1987-95 7801 -
V8 262-400 (A) (C) 1955-95 7802 -
V8 348/409 "W" Series 1958-65 7807 -
V8 366, 396, 402, 427, 454 (C) 1965-95 7809 -
V8 366, 396, 402, 427, 454 1965-95 7810 7848
Gen VI 1996-Later 7816 -
 
Chrysler
V6 238 (3.9L) 1987-90 7803 -
V8 270, 273, 315, 318, 325, 326, 331, 340, 354, 360, 392 (A) 1956-90 7803 -
V8 361, 383, 400, 426, 440 (1 bolt) 1955-80 7804 7848
V8 361, 383, 400, 426, 440 (3 bolt) 1955-80 7805 7848
 
Ford
V8 221, 260, 289, 302, 351W (from 3-21-84) 1984-95 7811 7844
V8 221, 260, 289, 302, 351W (from 3-21-84) (C) 1984-95 7814 -
V8 255, 289, 302, 302 Boss, 351W (to 3-21-84) 1962-84 7820 7844
V8 332, 352, 360, 390, 406, 410, 427, 428 1963-76 7808 -
V8 351C, 351M/400 1962-82 7821 -
V8 429/460 1968-87 7830 7848
 
Oldsmobile
V8 260, 307, 330, 350R, 400, 403, 425, 455 1965-90 7813 -
 
Pontiac
V8 287, 316, 326, 347, 350P, 370, 389, 400, 421, 428, 455 1955-82 7812 -
Edelbrock Installation Note INSTALLATION NOTE:

(A) Not applicable to OEM Chevrolet and Chrysler hydraulic roller-lifter camshaft equipped engines.
(B) For OEM hydraulic roller lifter cams only.
(C) Street legal timing chain sets include a heavy duty double roller chain, not a True Roller chain.

#7811: For 302 (5.0L) and 351W engines originally equipped with two-piece fuel pump eccentric or fuel injection. #7814: For 302 (5.0L) and 351W engines originally equipped with two-piece fuel pump eccentric or fuel injection. #7820: For 221, 255, 260, 289 standard, Boss 302, High Output 351W, and standard High Output engines originally equipped with one-piece fuel pump eccentric.


RPM-LINK ADJUSTABLE TRUE-ROLLER TIMING CHAIN SETS
Now, you can dial-in your camshaft with ease with our RPM-Link Roller Timing Chain Set. RPM-Link timing chain bolt onto your engine just like any other timing chain set, so there's no machining required and no need for special offset bushings for installation. Made from induction hardened billet steel, it allows for a quick cam timing adjustment to plus or minus six degrees.
RPM-Link True-Roller Timing Chain Sets by Edelbrock
Application Emissions Part #
Chevy 262-400 V8 (1955-95) (A) 7331
Chevy 5.0L, 5.7L V8 (1987-95) (B) 7332
Chevy LS1, LS2 & LS6 (1997-Later) 7343
Chevy LS7 (2005-Later) 7344
Chevy 396-454 V8 (1965-95) (A) 7334
Ford 221-351W V8 (1962-84) 7335
Edelbrock Installation Note INSTALLATION NOTE:

(A) Not applicable to OEM Chevrolet and Chrysler hydraulic roller-lifter camshaft equipped engines.
(B) For OEM hydraulic roller lifter cams only.


VICTOR-LINK TIMING CHAIN SET
This timing chain and gear set is designed for high-performance street and competition small-block Chevys operating in the 6500-8500 rpm range. #7880 withstands a higher operating range than other timing chains due to the machined link holes and high-strength steel. In addition, the chain links and pins are cold-hardened for greater strength and durability. Nine keyway setting points ensure precise timing selection. Gears are machined from SAE-1144 stress proof steel, have a larger tooth contact area and are induction hardened.
Victor-Link Timing Chain Sets by Edelbrock
Application Emissions Part #
Victor-Link Timing Chain for S/B Chevys 7880

Edelbrock Tech Note PRODUCT EMISSIONS GUIDE
The following guide is designed to help you determine which Edelbrock components are legal for use on your vehicle. Learn more about Edelbrock Product Emissions Guide.

    50-State Legal
    For Racing Use ONLY
    For Use on Pre-Pollution Controlled Vehicles (PPCV)
    Stock Replacement Part
    Engine Swaps