|
|
Signature Series Valve Covers
Engineered for function and styled for good looks, triple
chrome-plated Signature Series valve covers have
stock-style breather baffles that prevent oil passage
to the PCV valve. These quality valve covers accept
all emissions equipment, including PCV valve.
Rubber grommets for the breather and PCV valve
holes included. Matching breathers sold separately.
NOTE: Tall Profile are 1-1/4" taller than stock, and clear
most roller rockers and valvetrain components. Low
Profile valve covers clear air-conditioning and alternator brackets. Tall
profile valve covers will not clear stud girdles. Signature Series valve covers
clear most aluminum rocker arms and moderate lift cams.
Check clearance prior to purchase. |
 |
| |
Overall Height |
|
| AMC 290-304-343-360-390-401 V8 '67-91 (no baffle) |
3.0" |
#4431 |
| Buick 3.8L & 4.1L V6 '77 & later (no baffle) |
3.1" |
#4486 (A) |
| Chevrolet 2.8L 60° V6 '82-93 (no baffle) |
2.6" |
#4488 |
| Throttle bracket kit (included with #4488) |
N/A |
#4418 |
| Chevrolet 262-400 '59-86 (low) |
2.8" |
#4449 (B) |
| Chevrolet 262-400 '59-86 (tall) |
3.7" |
#4649*(B) |
| Chevrolet 396-454 V8 '65 & later (low) |
2.6" |
#4480 |
| Chevrolet 396-454 V8 '65 & later (tall) |
3.8" |
#4680 |
| Chrysler 318-340-360 V8 '65-91 |
3.2" |
#4495 |
| Chrysler 361-383-400-413-426-440 V8 '58-79 |
3.6" |
#4491 |
| Ford 260-289-302 (not Boss) and 351-W V8 |
3.7" |
#4460 (D) |
| Ford 352-360-390-406-410-427-428 V8 '58-76 |
3.9" |
#4462 |
| Ford 351M-400 and 351-C V8 |
2.9" |
#4461 |
| Ford 429/460 V8 |
3.6" |
#4463 |
| Oldsmobile 350-455 V8 (fits 5- and 10-hole heads) |
2.9" |
#4485 |
| Pontiac 301-326-350-389-400-421-455 V8 - '62-79 (no baffle) |
3.0" |
#4456 (C) |
| |
|
 |
Wing Bolts
Use #4401 with Elite low profile and #4402 with tall profile small-block Chevy valve covers only. |
 |
| 2-piece wing bolts 4-1/4" (4 per pack) |
#4401 |
| 1-piece race wing bolts — universal 5" (4 per pack) |
#4402 |
| |
|
|
Wing Bolts and Hold-Down Tabs
Universal valve cover hold-down kits may be used on all Edelbrock and similar design chrome valve
covers. #4401 also works with our Elite Series low profile S/B Chevy valve covers and #4402 works with
Elite Series tall profile S/B Chevy covers. All hold-down kits have 4 items per pack, except #4414.
|
 |
| 2-piece wing bolts (3-3/4" long) |
#4400 |
| 2-piece wing bolts (4-1/4" long) |
#4401 |
| 1-piece race wing bolts (universal, 5" long) |
#4402 |
| Hold-down tab kit (small-block Chevy, 4 pieces) |
#4404 |
| Hold-down tab kit (big-block Chevy, 7 pieces) |
#4414 |
| |
|
|
Valve Cover Breathers
Our push-on style valve cover breathers contain an effective filter which traps oil vapor and prevents engine
compartment contamination. Inscribed breathers come with rubber grommets and match our chrome valve
covers. Fits any 1-1/4" diameter valve cover hole.
|
 |
| Round Breather |
#4405* |
| Square Breather without nipple |
#4408* |
| Square Breather with 45° nipple |
#4409 |
| Round Breather with 90° nipple |
#4410 |
| |
|
Air Cleaners
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}