#3790

ENGINE: AMC 2.8L 60° V6
RPM RANGE: 1500-5500

Duration at 0.006" Lift:	Intake: 253°	Exhaust: 263°
Duration at 0.050" Lift:	Intake: 204°	Exhaust: 214°
Lift at Cam:	Intake: 0.280"	Exhaust: 0.295"
Lift at Valve:	Intake: 0.420"	Exhaust: 0.442"
Timing at 0.050" lift:	Open	Close
Intake:	5° ATDC	29° ABDC
Exhaust:	44° BBDC	10° BTDC
Centerlines:	Lobe Separation - 112°	Intake Centerline - 107°

NOTE: For non computer-controlled vehicles.

CAUTION: Use only stock valve springs. Use only stock ratio rocker arms.

close window

#2132

ENGINE: AMC 290-401 V8
RPM RANGE: 1500-5500

CAUTION: Use only Sure Seat Valve Springs, #5832 or 5932 Use stock ratio rocker arms only

Duration at 0.006" Lift:	Intake: 278°	Exhaust: 288°
Duration at 0.050" Lift:	Intake: 204°	Exhaust: 214°
Lift at Cam:	Intake: 0.280"	Exhaust: 0.295"
Lift at Valve:	Intake: 0.448"	Exhaust: 0.472"
Timing at 0.050" lift:	Open	Close
Intake:	3° ATDC	27° ABDC
Exhaust:	42° BBDC	8° BTDC
Centerlines:	Lobe Separation - 110°	Intake Centerline - 105°

CAUTION: Use Performer-Link Timing Set, #7818. Do not use late model timing sets. They are machined in a retarded position and are not recommended for this camshaft installation. Edelbrock Performer-Link True Rolling Timing Sets feature three keyways for specific timing selection. Always use the “0” or straight-up timing mark when installing Performer-Plus camshafts with Performer-Link Timing Sets.

Use only Sure Seat Valve Springs, #5832 or 5932 Use stock ratio rocker arms only

close window

#7132

ENGINE: AMC 343-401 V8
RPM RANGE: 1500-6500

Duration at 0.006" Lift:	Intake: 310°	Exhaust: 320°
Duration at 0.050" Lift:	Intake: 234°	Exhaust: 244°
Lift at Cam:	Intake: 0.325"	Exhaust: 0.340"
Lift at Valve:	Intake: 0.520"	Exhaust: 0.544"
Timing at 0.050" lift:	Open	Close
Intake:	10° BTDC	44° ABDC
Exhaust:	59° BBDC	5° ATDC
Centerlines:	Lobe Separation - 112°	Intake Centerline - 107°

Note: Adjustable pushrods or rocker arms required.

CAUTION: Use Performer-Link Timing Set, #7818. Do not use late model timing sets. They are machined in a retarded position and are not recommended for this camshaft installation. Edelbrock Performer-Link True Rolling Timing Sets feature three keyways for specific timing selection. Always use the “0” or straight-up timing mark when installing Performer RPM camshafts with Performer-Link Timing Sets.

Use only Edelbrock Cylinder Heads (Include Proper Valve Springs),or Crane # 99838 Valve Springs with Stock Iron Cylinder Heads. Use stock ratio rocker arms only.

close window