We are proud to announce the all new Camshaft cam card locator. Please type in the part number of your desired Performance Camshaft into the search field below. Proper search terms are as follows (2102, 5082, 7122)
Please do not use special characters.
Performance Camshafts, Lifter Kits and Matching Valvetrain for 352-428 V8 Ford - Edelbrock.com
Part #: #2106
Vehicle Type: FORD
Engine Application: 352-428 V8
RPM Range: Idle-5500
DURATION AS ADVERTISED
DURATION @ .050
LIFT @ CAM (Lobe)
LIFT @ VALVE
LOBE SEPERATION: 110°
INTAKE CENTERLINE: 105°
IDLE VACUUM @ 1000 RPM: 16"
The information below is for verification of
opening and closing events.
INTAKE TIMING @ .050" LIFT:
Opens: 8° ATDC
Closes: 22° ABDC
EXHAUST TIMING @ .050" LIFT:
Opens: 37° BBDC
Closes: 13° BTDC
OPTIONAL VALVE SPRINGS: #5806/#5906
CAM FEATURES: Produces 410 ft.-lbs. when matched with #2105 intake & stock heads.
INSTALLATION NOTES: Use Edelbrock Performer-Plus Timing Chain and Gear Set #7808. Do not use late model timing chain and gear sets that are designed for emission-controlled engines. These timing sets are machined in a retarded position and are not recommended for this camshaft installation. Edelbrock Timing Sets feature three keyways for specified timing selection.
Footnote 1: Will not work in 427 side-oilers. Isky spacer #350AW required for all FE Fords 1962 and earlier.
Footnote 2: Do not use dual valve springs. Use only recommended stock or Edelbrock Sure Seat Valve Springs #5806 or #5906 (for valve rotators).