We are proud to announce the all new Camshaft cam card locator. Please type in the part number of your desired Performance Camshaft into the search field below. Proper search terms are as follows (2102, 5082, 7122)
Please do not use special characters.
Performance Camshafts, Lifter Kits and Matching Valvetrain for 289-302 V8 Ford - Edelbrock.com
Part #: #2122
Vehicle Type: FORD
Engine Application: 289-302 V8
RPM Range: Idle-5500
DURATION AS ADVERTISED
DURATION @ .050
LIFT @ CAM (Lobe)
LIFT @ VALVE
LOBE SEPERATION: 112°
INTAKE CENTERLINE: 107°
IDLE VACUUM @ 1000 RPM: 16"
The information below is for verification of
opening and closing events.
INTAKE TIMING @ .050" LIFT:
Opens: 5° ATDC
Closes: 29° ABDC
EXHAUST TIMING @ .050" LIFT:
Opens: 44° BBDC
Closes: 10° BTDC
OPTIONAL VALVE SPRINGS: #5822/#5922
CAM FEATURES: Produces 310 HP & 260 ft.-lbs. when matched with #2121 intake and #60329 heads.
INSTALLATION NOTES: Use Edelbrock Performer-Plus Timing Chain and Gear Set #7820 (1965½72-1/2) or #7811 (1973½90). Accu-Drive gear drive #7892 may also be used. Do not use late model timing chain and gear sets that are designed for emission-controlled engines. These timing sets are machined in a retarded position and are not recommended for this camshaft installation. Edelbrock Timing Sets feature three keyways for specified timing selection.
Footnote 1: Not for 1985 and later engines with roller lifters.
Footnote 2: Do not use dual valve springs. Use only recommended stock or Edelbrock Sure Seat Valve Springs #5822 or #5922 (for valve rotators).
Footnote 3: Use stock ratio (1.6:1) rocker arms only.