We are proud to announce the all new Camshaft cam card locator. Please type in the part number of your desired Performance Camshaft into the search field below. Proper search terms are as follows (2102, 5082, 7122)
Please do not use special characters.
Performance Camshafts, Lifter Kits and Matching Valvetrain for 290-401 V8 AMC - Edelbrock.com
Camshaft: Performer-Plus
Part #: #2132
Vehicle Type: AMC
Engine Application: 290-401 V8
RPM Range: 1500-5500
DURATION AS ADVERTISED
INTAKE: 278°
EXHAUST: 288°
DURATION @ .050
INTAKE: 204°
EXHAUST: 214°
LIFT @ CAM (Lobe)
INTAKE: 0.28"
EXHAUST: 0.295"
LIFT @ VALVE
INTAKE: 0.448"
EXHAUST: 0.472"
LOBE SEPERATION: 110°
INTAKE CENTERLINE: 105°
IDLE VACUUM @ 1000 RPM: 15"
The information below is for verification of
opening and closing events.
INTAKE TIMING @ .050" LIFT:
Opens: 3° ATDC
Closes: 27° ABDC
EXHAUST TIMING @ .050" LIFT:
Opens: 42° BBDC
Closes: 8° BTDC
OPTIONAL VALVE SPRINGS: #5832/#5932
CAM FEATURES: Produces 275 ft.-lbs. when matched with #2131 intake and stock heads.
INSTALLATION NOTES: Use Performer-Link Timing Set, #7818. Do not use late model timing sets. They are machined in a retarded position and are not recommended for this camshaft installation. Edelbrock Performer-Link True Rolling Timing Sets feature three keyways for specific timing selection. Always use the – or straight-up timing mark when installing Performer-Plus camshafts with Performer-Link Timing Sets.
Footnote 1: Use only Sure Seat Valve Springs, #5832 or 5932
AMC
