We are proud to announce the all new Camshaft cam card locator. Please type in the part number of your desired Performance Camshaft into the search field below. Proper search terms are as follows (2102, 5082, 7122)
Please do not use special characters.
Performance Camshafts, Lifter Kits and Matching Valvetrain for 383-400-440 V8 Chrysler - Edelbrock.com
Part #: #2192
Vehicle Type: CHRYSLER
Engine Application: 383-400-440 V8
RPM Range: Idle-5500
DURATION AS ADVERTISED
DURATION @ .050
LIFT @ CAM (Lobe)
LIFT @ VALVE
LOBE SEPERATION: 112°
INTAKE CENTERLINE: 107°
IDLE VACUUM @ 1000 RPM: 14"
The information below is for verification of
opening and closing events.
INTAKE TIMING @ .050" LIFT:
Opens: 5° ATDC
Closes: 29° ABDC
EXHAUST TIMING @ .050" LIFT:
Opens: 44° BBDC
Closes: 10° BTDC
OPTIONAL VALVE SPRINGS: #5892/#5992
CAM FEATURES: Produces 427 ft.-lbs. when matched with #2191 intake and stock heads.
INSTALLATION NOTES: Use Edelbrock Performer-Plus Timing Chain and Steel Gear Set #7804. Do not use late model timing chain and gear sets that are designed for emission-controlled engines. These timing sets are machined in a retarded position and are not recommended for this camshaft installation. Edelbrock Timing Sets feature three keyways for specified timing selection; use the "0" keyway for Performer-Plus cams.
Footnote 1: For 1968 and later.
Footnote 2: Do not use dual valve springs. Use only recommended Edelbrock Sure Seat Valve Springs #5892 (nonrotators) or #5992 (rotators).